dect
/
libpcap
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
libpcap/pcap-linux.c

2152 lines
59 KiB
C
Raw Blame History

/*
* pcap-linux.c: Packet capture interface to the Linux kernel
*
* Copyright (c) 2000 Torsten Landschoff <torsten@debian.org>
* Sebastian Krahmer <krahmer@cs.uni-potsdam.de>
*
* License: BSD
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef lint
static const char rcsid[] _U_ =
"@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.112 2005-06-20 21:27:10 guy Exp $ (LBL)";
#endif
/*
* Known problems with 2.0[.x] kernels:
*
* - The loopback device gives every packet twice; on 2.2[.x] kernels,
* if we use PF_PACKET, we can filter out the transmitted version
* of the packet by using data in the "sockaddr_ll" returned by
* "recvfrom()", but, on 2.0[.x] kernels, we have to use
* PF_INET/SOCK_PACKET, which means "recvfrom()" supplies a
* "sockaddr_pkt" which doesn't give us enough information to let
* us do that.
*
* - We have to set the interface's IFF_PROMISC flag ourselves, if
* we're to run in promiscuous mode, which means we have to turn
* it off ourselves when we're done; the kernel doesn't keep track
* of how many sockets are listening promiscuously, which means
* it won't get turned off automatically when no sockets are
* listening promiscuously. We catch "pcap_close()" and, for
* interfaces we put into promiscuous mode, take them out of
* promiscuous mode - which isn't necessarily the right thing to
* do, if another socket also requested promiscuous mode between
* the time when we opened the socket and the time when we close
* the socket.
*
* - MSG_TRUNC isn't supported, so you can't specify that "recvfrom()"
* return the amount of data that you could have read, rather than
* the amount that was returned, so we can't just allocate a buffer
* whose size is the snapshot length and pass the snapshot length
* as the byte count, and also pass MSG_TRUNC, so that the return
* value tells us how long the packet was on the wire.
*
* This means that, if we want to get the actual size of the packet,
* so we can return it in the "len" field of the packet header,
* we have to read the entire packet, not just the part that fits
* within the snapshot length, and thus waste CPU time copying data
* from the kernel that our caller won't see.
*
* We have to get the actual size, and supply it in "len", because
* otherwise, the IP dissector in tcpdump, for example, will complain
* about "truncated-ip", as the packet will appear to have been
* shorter, on the wire, than the IP header said it should have been.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "pcap-int.h"
#include "sll.h"
#ifdef HAVE_DAG_API
#include "pcap-dag.h"
#endif /* HAVE_DAG_API */
#ifdef HAVE_SEPTEL_API
#include "pcap-septel.h"
#endif /* HAVE_SEPTEL_API */
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/utsname.h>
#include <net/if.h>
#include <netinet/in.h>
#include <linux/if_ether.h>
#include <net/if_arp.h>
/*
* If PF_PACKET is defined, we can use {SOCK_RAW,SOCK_DGRAM}/PF_PACKET
* sockets rather than SOCK_PACKET sockets.
*
* To use them, we include <linux/if_packet.h> rather than
* <netpacket/packet.h>; we do so because
*
* some Linux distributions (e.g., Slackware 4.0) have 2.2 or
* later kernels and libc5, and don't provide a <netpacket/packet.h>
* file;
*
* not all versions of glibc2 have a <netpacket/packet.h> file
* that defines stuff needed for some of the 2.4-or-later-kernel
* features, so if the system has a 2.4 or later kernel, we
* still can't use those features.
*
* We're already including a number of other <linux/XXX.h> headers, and
* this code is Linux-specific (no other OS has PF_PACKET sockets as
* a raw packet capture mechanism), so it's not as if you gain any
* useful portability by using <netpacket/packet.h>
*
* XXX - should we just include <linux/if_packet.h> even if PF_PACKET
* isn't defined? It only defines one data structure in 2.0.x, so
* it shouldn't cause any problems.
*/
#ifdef PF_PACKET
# include <linux/if_packet.h>
/*
* On at least some Linux distributions (for example, Red Hat 5.2),
* there's no <netpacket/packet.h> file, but PF_PACKET is defined if
* you include <sys/socket.h>, but <linux/if_packet.h> doesn't define
* any of the PF_PACKET stuff such as "struct sockaddr_ll" or any of
* the PACKET_xxx stuff.
*
* So we check whether PACKET_HOST is defined, and assume that we have
* PF_PACKET sockets only if it is defined.
*/
# ifdef PACKET_HOST
# define HAVE_PF_PACKET_SOCKETS
# endif /* PACKET_HOST */
#endif /* PF_PACKET */
#ifdef SO_ATTACH_FILTER
#include <linux/types.h>
#include <linux/filter.h>
#endif
#ifndef __GLIBC__
typedef int socklen_t;
#endif
#ifndef MSG_TRUNC
/*
* This is being compiled on a system that lacks MSG_TRUNC; define it
* with the value it has in the 2.2 and later kernels, so that, on
* those kernels, when we pass it in the flags argument to "recvfrom()"
* we're passing the right value and thus get the MSG_TRUNC behavior
* we want. (We don't get that behavior on 2.0[.x] kernels, because
* they didn't support MSG_TRUNC.)
*/
#define MSG_TRUNC 0x20
#endif
#ifndef SOL_PACKET
/*
* This is being compiled on a system that lacks SOL_PACKET; define it
* with the value it has in the 2.2 and later kernels, so that we can
* set promiscuous mode in the good modern way rather than the old
* 2.0-kernel crappy way.
*/
#define SOL_PACKET 263
#endif
#define MAX_LINKHEADER_SIZE 256
/*
* When capturing on all interfaces we use this as the buffer size.
* Should be bigger then all MTUs that occur in real life.
* 64kB should be enough for now.
*/
#define BIGGER_THAN_ALL_MTUS (64*1024)
/*
* Prototypes for internal functions
*/
static void map_arphrd_to_dlt(pcap_t *, int, int);
static int live_open_old(pcap_t *, const char *, int, int, char *);
static int live_open_new(pcap_t *, const char *, int, int, char *);
static int pcap_read_linux(pcap_t *, int, pcap_handler, u_char *);
static int pcap_read_packet(pcap_t *, pcap_handler, u_char *);
static int pcap_inject_linux(pcap_t *, const void *, size_t);
static int pcap_stats_linux(pcap_t *, struct pcap_stat *);
static int pcap_setfilter_linux(pcap_t *, struct bpf_program *);
static int pcap_setdirection_linux(pcap_t *, direction_t);
static void pcap_close_linux(pcap_t *);
/*
* Wrap some ioctl calls
*/
#ifdef HAVE_PF_PACKET_SOCKETS
static int iface_get_id(int fd, const char *device, char *ebuf);
#endif
static int iface_get_mtu(int fd, const char *device, char *ebuf);
static int iface_get_arptype(int fd, const char *device, char *ebuf);
#ifdef HAVE_PF_PACKET_SOCKETS
static int iface_bind(int fd, int ifindex, char *ebuf);
#endif
static int iface_bind_old(int fd, const char *device, char *ebuf);
#ifdef SO_ATTACH_FILTER
static int fix_program(pcap_t *handle, struct sock_fprog *fcode);
static int fix_offset(struct bpf_insn *p);
static int set_kernel_filter(pcap_t *handle, struct sock_fprog *fcode);
static int reset_kernel_filter(pcap_t *handle);
static struct sock_filter total_insn
= BPF_STMT(BPF_RET | BPF_K, 0);
static struct sock_fprog total_fcode
= { 1, &total_insn };
#endif
/*
* Get a handle for a live capture from the given device. You can
* pass NULL as device to get all packages (without link level
* information of course). If you pass 1 as promisc the interface
* will be set to promiscous mode (XXX: I think this usage should
* be deprecated and functions be added to select that later allow
* modification of that values -- Torsten).
*
* See also pcap(3).
*/
pcap_t *
pcap_open_live(const char *device, int snaplen, int promisc, int to_ms,
char *ebuf)
{
pcap_t *handle;
int mtu;
int err;
int live_open_ok = 0;
struct utsname utsname;
#ifdef HAVE_DAG_API
if (strstr(device, "dag")) {
return dag_open_live(device, snaplen, promisc, to_ms, ebuf);
}
#endif /* HAVE_DAG_API */
#ifdef HAVE_SEPTEL_API
if (strstr(device, "septel")) {
return septel_open_live(device, snaplen, promisc, to_ms, ebuf);
}
#endif /* HAVE_SEPTEL_API */
/* Allocate a handle for this session. */
handle = malloc(sizeof(*handle));
if (handle == NULL) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
pcap_strerror(errno));
return NULL;
}
/* Initialize some components of the pcap structure. */
memset(handle, 0, sizeof(*handle));
handle->snapshot = snaplen;
handle->md.timeout = to_ms;
/*
* NULL and "any" are special devices which give us the hint to
* monitor all devices.
*/
if (!device || strcmp(device, "any") == 0) {
device = NULL;
handle->md.device = strdup("any");
if (promisc) {
promisc = 0;
/* Just a warning. */
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"Promiscuous mode not supported on the \"any\" device");
}
} else
handle->md.device = strdup(device);
if (handle->md.device == NULL) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "strdup: %s",
pcap_strerror(errno) );
free(handle);
return NULL;
}
/*
* Current Linux kernels use the protocol family PF_PACKET to
* allow direct access to all packets on the network while
* older kernels had a special socket type SOCK_PACKET to
* implement this feature.
* While this old implementation is kind of obsolete we need
* to be compatible with older kernels for a while so we are
* trying both methods with the newer method preferred.
*/
if ((err = live_open_new(handle, device, promisc, to_ms, ebuf)) == 1)
live_open_ok = 1;
else if (err == 0) {
/* Non-fatal error; try old way */
if (live_open_old(handle, device, promisc, to_ms, ebuf))
live_open_ok = 1;
}
if (!live_open_ok) {
/*
* Both methods to open the packet socket failed. Tidy
* up and report our failure (ebuf is expected to be
* set by the functions above).
*/
if (handle->md.device != NULL)
free(handle->md.device);
free(handle);
return NULL;
}
/*
* Compute the buffer size.
*
* If we're using SOCK_PACKET, this might be a 2.0[.x] kernel,
* and might require special handling - check.
*/
if (handle->md.sock_packet && (uname(&utsname) < 0 ||
strncmp(utsname.release, "2.0", 3) == 0)) {
/*
* We're using a SOCK_PACKET structure, and either
* we couldn't find out what kernel release this is,
* or it's a 2.0[.x] kernel.
*
* In the 2.0[.x] kernel, a "recvfrom()" on
* a SOCK_PACKET socket, with MSG_TRUNC set, will
* return the number of bytes read, so if we pass
* a length based on the snapshot length, it'll
* return the number of bytes from the packet
* copied to userland, not the actual length
* of the packet.
*
* This means that, for example, the IP dissector
* in tcpdump will get handed a packet length less
* than the length in the IP header, and will
* complain about "truncated-ip".
*
* So we don't bother trying to copy from the
* kernel only the bytes in which we're interested,
* but instead copy them all, just as the older
* versions of libpcap for Linux did.
*
* The buffer therefore needs to be big enough to
* hold the largest packet we can get from this
* device. Unfortunately, we can't get the MRU
* of the network; we can only get the MTU. The
* MTU may be too small, in which case a packet larger
* than the buffer size will be truncated *and* we
* won't get the actual packet size.
*
* However, if the snapshot length is larger than
* the buffer size based on the MTU, we use the
* snapshot length as the buffer size, instead;
* this means that with a sufficiently large snapshot
* length we won't artificially truncate packets
* to the MTU-based size.
*
* This mess just one of many problems with packet
* capture on 2.0[.x] kernels; you really want a
* 2.2[.x] or later kernel if you want packet capture
* to work well.
*/
mtu = iface_get_mtu(handle->fd, device, ebuf);
if (mtu == -1) {
pcap_close_linux(handle);
free(handle);
return NULL;
}
handle->bufsize = MAX_LINKHEADER_SIZE + mtu;
if (handle->bufsize < handle->snapshot)
handle->bufsize = handle->snapshot;
} else {
/*
* This is a 2.2[.x] or later kernel (we know that
* either because we're not using a SOCK_PACKET
* socket - PF_PACKET is supported only in 2.2
* and later kernels - or because we checked the
* kernel version).
*
* We can safely pass "recvfrom()" a byte count
* based on the snapshot length.
*/
handle->bufsize = handle->snapshot;
}
/* Allocate the buffer */
handle->buffer = malloc(handle->bufsize + handle->offset);
if (!handle->buffer) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"malloc: %s", pcap_strerror(errno));
pcap_close_linux(handle);
free(handle);
return NULL;
}
/*
* "handle->fd" is a socket, so "select()" and "poll()"
* should work on it.
*/
handle->selectable_fd = handle->fd;
handle->read_op = pcap_read_linux;
handle->inject_op = pcap_inject_linux;
handle->setfilter_op = pcap_setfilter_linux;
handle->setdirection_op = pcap_setdirection_linux;
handle->set_datalink_op = NULL; /* can't change data link type */
handle->getnonblock_op = pcap_getnonblock_fd;
handle->setnonblock_op = pcap_setnonblock_fd;
handle->stats_op = pcap_stats_linux;
handle->close_op = pcap_close_linux;
return handle;
}
/*
* Read at most max_packets from the capture stream and call the callback
* for each of them. Returns the number of packets handled or -1 if an
* error occured.
*/
static int
pcap_read_linux(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user)
{
/*
* Currently, on Linux only one packet is delivered per read,
* so we don't loop.
*/
return pcap_read_packet(handle, callback, user);
}
/*
* Read a packet from the socket calling the handler provided by
* the user. Returns the number of packets received or -1 if an
* error occured.
*/
static int
pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata)
{
u_char *bp;
int offset;
#ifdef HAVE_PF_PACKET_SOCKETS
struct sockaddr_ll from;
struct sll_header *hdrp;
#else
struct sockaddr from;
#endif
socklen_t fromlen;
int packet_len, caplen;
struct pcap_pkthdr pcap_header;
#ifdef HAVE_PF_PACKET_SOCKETS
/*
* If this is a cooked device, leave extra room for a
* fake packet header.
*/
if (handle->md.cooked)
offset = SLL_HDR_LEN;
else
offset = 0;
#else
/*
* This system doesn't have PF_PACKET sockets, so it doesn't
* support cooked devices.
*/
offset = 0;
#endif
/* Receive a single packet from the kernel */
bp = handle->buffer + handle->offset;
do {
/*
* Has "pcap_breakloop()" been called?
*/
if (handle->break_loop) {
/*
* Yes - clear the flag that indicates that it
* has, and return -2 as an indication that we
* were told to break out of the loop.
*/
handle->break_loop = 0;
return -2;
}
fromlen = sizeof(from);
packet_len = recvfrom(
handle->fd, bp + offset,
handle->bufsize - offset, MSG_TRUNC,
(struct sockaddr *) &from, &fromlen);
} while (packet_len == -1 && errno == EINTR);
/* Check if an error occured */
if (packet_len == -1) {
if (errno == EAGAIN)
return 0; /* no packet there */
else {
snprintf(handle->errbuf, sizeof(handle->errbuf),
"recvfrom: %s", pcap_strerror(errno));
return -1;
}
}
#ifdef HAVE_PF_PACKET_SOCKETS
if (!handle->md.sock_packet) {
/*
* Do checks based on packet direction.
* We can only do this if we're using PF_PACKET; the
* address returned for SOCK_PACKET is a "sockaddr_pkt"
* which lacks the relevant packet type information.
*/
if (from.sll_pkttype == PACKET_OUTGOING) {
/*
* Outgoing packet.
* If this is from the loopback device, reject it;
* we'll see the packet as an incoming packet as well,
* and we don't want to see it twice.
*/
if (from.sll_ifindex == handle->md.lo_ifindex)
return 0;
/*
* If the user only wants incoming packets, reject it.
*/
if (handle->direction == D_IN)
return 0;
} else {
/*
* Incoming packet.
* If the user only wants outgoing packets, reject it.
*/
if (handle->direction == D_OUT)
return 0;
}
}
#endif
#ifdef HAVE_PF_PACKET_SOCKETS
/*
* If this is a cooked device, fill in the fake packet header.
*/
if (handle->md.cooked) {
/*
* Add the length of the fake header to the length
* of packet data we read.
*/
packet_len += SLL_HDR_LEN;
hdrp = (struct sll_header *)bp;
/*
* Map the PACKET_ value to a LINUX_SLL_ value; we
* want the same numerical value to be used in
* the link-layer header even if the numerical values
* for the PACKET_ #defines change, so that programs
* that look at the packet type field will always be
* able to handle DLT_LINUX_SLL captures.
*/
switch (from.sll_pkttype) {
case PACKET_HOST:
hdrp->sll_pkttype = htons(LINUX_SLL_HOST);
break;
case PACKET_BROADCAST:
hdrp->sll_pkttype = htons(LINUX_SLL_BROADCAST);
break;
case PACKET_MULTICAST:
hdrp->sll_pkttype = htons(LINUX_SLL_MULTICAST);
break;
case PACKET_OTHERHOST:
hdrp->sll_pkttype = htons(LINUX_SLL_OTHERHOST);
break;
case PACKET_OUTGOING:
hdrp->sll_pkttype = htons(LINUX_SLL_OUTGOING);
break;
default:
hdrp->sll_pkttype = -1;
break;
}
hdrp->sll_hatype = htons(from.sll_hatype);
hdrp->sll_halen = htons(from.sll_halen);
memcpy(hdrp->sll_addr, from.sll_addr,
(from.sll_halen > SLL_ADDRLEN) ?
SLL_ADDRLEN :
from.sll_halen);
hdrp->sll_protocol = from.sll_protocol;
}
#endif
/*
* XXX: According to the kernel source we should get the real
* packet len if calling recvfrom with MSG_TRUNC set. It does
* not seem to work here :(, but it is supported by this code
* anyway.
* To be honest the code RELIES on that feature so this is really
* broken with 2.2.x kernels.
* I spend a day to figure out what's going on and I found out
* that the following is happening:
*
* The packet comes from a random interface and the packet_rcv
* hook is called with a clone of the packet. That code inserts
* the packet into the receive queue of the packet socket.
* If a filter is attached to that socket that filter is run
* first - and there lies the problem. The default filter always
* cuts the packet at the snaplen:
*
* # tcpdump -d
* (000) ret #68
*
* So the packet filter cuts down the packet. The recvfrom call
* says "hey, it's only 68 bytes, it fits into the buffer" with
* the result that we don't get the real packet length. This
* is valid at least until kernel 2.2.17pre6.
*
* We currently handle this by making a copy of the filter
* program, fixing all "ret" instructions with non-zero
* operands to have an operand of 65535 so that the filter
* doesn't truncate the packet, and supplying that modified
* filter to the kernel.
*/
caplen = packet_len;
if (caplen > handle->snapshot)
caplen = handle->snapshot;
/* Run the packet filter if not using kernel filter */
if (!handle->md.use_bpf && handle->fcode.bf_insns) {
if (bpf_filter(handle->fcode.bf_insns, bp,
packet_len, caplen) == 0)
{
/* rejected by filter */
return 0;
}
}
/* Fill in our own header data */
if (ioctl(handle->fd, SIOCGSTAMP, &pcap_header.ts) == -1) {
snprintf(handle->errbuf, sizeof(handle->errbuf),
"ioctl: %s", pcap_strerror(errno));
return -1;
}
pcap_header.caplen = caplen;
pcap_header.len = packet_len;
/*
* Count the packet.
*
* Arguably, we should count them before we check the filter,
* as on many other platforms "ps_recv" counts packets
* handed to the filter rather than packets that passed
* the filter, but if filtering is done in the kernel, we
* can't get a count of packets that passed the filter,
* and that would mean the meaning of "ps_recv" wouldn't
* be the same on all Linux systems.
*
* XXX - it's not the same on all systems in any case;
* ideally, we should have a "get the statistics" call
* that supplies more counts and indicates which of them
* it supplies, so that we supply a count of packets
* handed to the filter only on platforms where that
* information is available.
*
* We count them here even if we can get the packet count
* from the kernel, as we can only determine at run time
* whether we'll be able to get it from the kernel (if
* HAVE_TPACKET_STATS isn't defined, we can't get it from
* the kernel, but if it is defined, the library might
* have been built with a 2.4 or later kernel, but we
* might be running on a 2.2[.x] kernel without Alexey
* Kuznetzov's turbopacket patches, and thus the kernel
* might not be able to supply those statistics). We
* could, I guess, try, when opening the socket, to get
* the statistics, and if we can not increment the count
* here, but it's not clear that always incrementing
* the count is more expensive than always testing a flag
* in memory.
*/
handle->md.stat.ps_recv++;
/* Call the user supplied callback function */
callback(userdata, &pcap_header, bp);
return 1;
}
static int
pcap_inject_linux(pcap_t *handle, const void *buf, size_t size)
{
int ret;
#ifdef HAVE_PF_PACKET_SOCKETS
if (!handle->md.sock_packet) {
/* PF_PACKET socket */
if (handle->md.ifindex == -1) {
/*
* We don't support sending on the "any" device.
*/
strlcpy(handle->errbuf,
"Sending packets isn't supported on the \"any\" device",
PCAP_ERRBUF_SIZE);
return (-1);
}
if (handle->md.cooked) {
/*
* We don't support sending on the "any" device.
*
* XXX - how do you send on a bound cooked-mode
* socket?
* Is a "sendto()" required there?
*/
strlcpy(handle->errbuf,
"Sending packets isn't supported in cooked mode",
PCAP_ERRBUF_SIZE);
return (-1);
}
}
#endif
ret = send(handle->fd, buf, size, 0);
if (ret == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "send: %s",
pcap_strerror(errno));
return (-1);
}
return (ret);
}
/*
* Get the statistics for the given packet capture handle.
* Reports the number of dropped packets iff the kernel supports
* the PACKET_STATISTICS "getsockopt()" argument (2.4 and later
* kernels, and 2.2[.x] kernels with Alexey Kuznetzov's turbopacket
* patches); otherwise, that information isn't available, and we lie
* and report 0 as the count of dropped packets.
*/
static int
pcap_stats_linux(pcap_t *handle, struct pcap_stat *stats)
{
#ifdef HAVE_TPACKET_STATS
struct tpacket_stats kstats;
socklen_t len = sizeof (struct tpacket_stats);
#endif
#ifdef HAVE_TPACKET_STATS
/*
* Try to get the packet counts from the kernel.
*/
if (getsockopt(handle->fd, SOL_PACKET, PACKET_STATISTICS,
&kstats, &len) > -1) {
/*
* In "linux/net/packet/af_packet.c", at least in the
* 2.4.9 kernel, "tp_packets" is incremented for every
* packet that passes the packet filter *and* is
* successfully queued on the socket; "tp_drops" is
* incremented for every packet dropped because there's
* not enough free space in the socket buffer.
*
* When the statistics are returned for a PACKET_STATISTICS
* "getsockopt()" call, "tp_drops" is added to "tp_packets",
* so that "tp_packets" counts all packets handed to
* the PF_PACKET socket, including packets dropped because
* there wasn't room on the socket buffer - but not
* including packets that didn't pass the filter.
*
* In the BSD BPF, the count of received packets is
* incremented for every packet handed to BPF, regardless
* of whether it passed the filter.
*
* We can't make "pcap_stats()" work the same on both
* platforms, but the best approximation is to return
* "tp_packets" as the count of packets and "tp_drops"
* as the count of drops.
*
* Keep a running total because each call to
* getsockopt(handle->fd, SOL_PACKET, PACKET_STATISTICS, ....
* resets the counters to zero.
*/
handle->md.stat.ps_recv += kstats.tp_packets;
handle->md.stat.ps_drop += kstats.tp_drops;
}
else
{
/*
* If the error was EOPNOTSUPP, fall through, so that
* if you build the library on a system with
* "struct tpacket_stats" and run it on a system
* that doesn't, it works as it does if the library
* is built on a system without "struct tpacket_stats".
*/
if (errno != EOPNOTSUPP) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"pcap_stats: %s", pcap_strerror(errno));
return -1;
}
}
#endif
/*
* On systems where the PACKET_STATISTICS "getsockopt()" argument
* is supported on PF_PACKET sockets:
*
* "ps_recv" counts only packets that *passed* the filter,
* not packets that didn't pass the filter. This includes
* packets later dropped because we ran out of buffer space.
*
* "ps_drop" counts packets dropped because we ran out of
* buffer space. It doesn't count packets dropped by the
* interface driver. It counts only packets that passed
* the filter.
*
* Both statistics include packets not yet read from the
* kernel by libpcap, and thus not yet seen by the application.
*
* On systems where the PACKET_STATISTICS "getsockopt()" argument
* is not supported on PF_PACKET sockets:
*
* "ps_recv" counts only packets that *passed* the filter,
* not packets that didn't pass the filter. It does not
* count packets dropped because we ran out of buffer
* space.
*
* "ps_drop" is not supported.
*
* "ps_recv" doesn't include packets not yet read from
* the kernel by libpcap.
*/
*stats = handle->md.stat;
return 0;
}
/*
* Description string for the "any" device.
*/
static const char any_descr[] = "Pseudo-device that captures on all interfaces";
int
pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
{
if (pcap_add_if(alldevsp, "any", 0, any_descr, errbuf) < 0)
return (-1);
#ifdef HAVE_DAG_API
if (dag_platform_finddevs(alldevsp, errbuf) < 0)
return (-1);
#endif /* HAVE_DAG_API */
#ifdef HAVE_SEPTEL_API
if (septel_platform_finddevs(alldevsp, errbuf) < 0)
return (-1);
#endif /* HAVE_SEPTEL_API */
return (0);
}
/*
* Attach the given BPF code to the packet capture device.
*/
static int
pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter)
{
#ifdef SO_ATTACH_FILTER
struct sock_fprog fcode;
int can_filter_in_kernel;
int err = 0;
#endif
if (!handle)
return -1;
if (!filter) {
strncpy(handle->errbuf, "setfilter: No filter specified",
sizeof(handle->errbuf));
return -1;
}
/* Make our private copy of the filter */
if (install_bpf_program(handle, filter) < 0)
/* install_bpf_program() filled in errbuf */
return -1;
/*
* Run user level packet filter by default. Will be overriden if
* installing a kernel filter succeeds.
*/
handle->md.use_bpf = 0;
/* Install kernel level filter if possible */
#ifdef SO_ATTACH_FILTER
#ifdef USHRT_MAX
if (handle->fcode.bf_len > USHRT_MAX) {
/*
* fcode.len is an unsigned short for current kernel.
* I have yet to see BPF-Code with that much
* instructions but still it is possible. So for the
* sake of correctness I added this check.
*/
fprintf(stderr, "Warning: Filter too complex for kernel\n");
fcode.filter = NULL;
can_filter_in_kernel = 0;
} else
#endif /* USHRT_MAX */
{
/*
* Oh joy, the Linux kernel uses struct sock_fprog instead
* of struct bpf_program and of course the length field is
* of different size. Pointed out by Sebastian
*
* Oh, and we also need to fix it up so that all "ret"
* instructions with non-zero operands have 65535 as the
* operand, and so that, if we're in cooked mode, all
* memory-reference instructions use special magic offsets
* in references to the link-layer header and assume that
* the link-layer payload begins at 0; "fix_program()"
* will do that.
*/
switch (fix_program(handle, &fcode)) {
case -1:
default:
/*
* Fatal error; just quit.
* (The "default" case shouldn't happen; we
* return -1 for that reason.)
*/
return -1;
case 0:
/*
* The program performed checks that we can't make
* work in the kernel.
*/
can_filter_in_kernel = 0;
break;
case 1:
/*
* We have a filter that'll work in the kernel.
*/
can_filter_in_kernel = 1;
break;
}
}
if (can_filter_in_kernel) {
if ((err = set_kernel_filter(handle, &fcode)) == 0)
{
/* Installation succeded - using kernel filter. */
handle->md.use_bpf = 1;
}
else if (err == -1) /* Non-fatal error */
{
/*
* Print a warning if we weren't able to install
* the filter for a reason other than "this kernel
* isn't configured to support socket filters.
*/
if (errno != ENOPROTOOPT && errno != EOPNOTSUPP) {
fprintf(stderr,
"Warning: Kernel filter failed: %s\n",
pcap_strerror(errno));
}
}
}
/*
* If we're not using the kernel filter, get rid of any kernel
* filter that might've been there before, e.g. because the
* previous filter could work in the kernel, or because some other
* code attached a filter to the socket by some means other than
* calling "pcap_setfilter()". Otherwise, the kernel filter may
* filter out packets that would pass the new userland filter.
*/
if (!handle->md.use_bpf)
reset_kernel_filter(handle);
/*
* Free up the copy of the filter that was made by "fix_program()".
*/
if (fcode.filter != NULL)
free(fcode.filter);
if (err == -2)
/* Fatal error */
return -1;
#endif /* SO_ATTACH_FILTER */
return 0;
}
/*
* Set direction flag: Which packets do we accept on a forwarding
* single device? IN, OUT or both?
*/
static int
pcap_setdirection_linux(pcap_t *handle, direction_t d)
{
#ifdef HAVE_PF_PACKET_SOCKETS
if (!handle->md.sock_packet) {
handle->direction = d;
return 0;
}
#endif
/*
* We're not using PF_PACKET sockets, so we can't determine
* the direction of the packet.
*/
snprintf(handle->errbuf, sizeof(handle->errbuf),
"Setting direction is not supported on SOCK_PACKET sockets");
return -1;
}
/*
* Linux uses the ARP hardware type to identify the type of an
* interface. pcap uses the DLT_xxx constants for this. This
* function takes a pointer to a "pcap_t", and an ARPHRD_xxx
* constant, as arguments, and sets "handle->linktype" to the
* appropriate DLT_XXX constant and sets "handle->offset" to
* the appropriate value (to make "handle->offset" plus link-layer
* header length be a multiple of 4, so that the link-layer payload
* will be aligned on a 4-byte boundary when capturing packets).
* (If the offset isn't set here, it'll be 0; add code as appropriate
* for cases where it shouldn't be 0.)
*
* If "cooked_ok" is non-zero, we can use DLT_LINUX_SLL and capture
* in cooked mode; otherwise, we can't use cooked mode, so we have
* to pick some type that works in raw mode, or fail.
*
* Sets the link type to -1 if unable to map the type.
*/
static void map_arphrd_to_dlt(pcap_t *handle, int arptype, int cooked_ok)
{
switch (arptype) {
case ARPHRD_ETHER:
/*
* This is (presumably) a real Ethernet capture; give it a
* link-layer-type list with DLT_EN10MB and DLT_DOCSIS, so
* that an application can let you choose it, in case you're
* capturing DOCSIS traffic that a Cisco Cable Modem
* Termination System is putting out onto an Ethernet (it
* doesn't put an Ethernet header onto the wire, it puts raw
* DOCSIS frames out on the wire inside the low-level
* Ethernet framing).
*
* XXX - are there any sorts of "fake Ethernet" that have
* ARPHRD_ETHER but that *shouldn't offer DLT_DOCSIS as
* a Cisco CMTS won't put traffic onto it or get traffic
* bridged onto it? ISDN is handled in "live_open_new()",
* as we fall back on cooked mode there; are there any
* others?
*/
handle->dlt_list = (u_int *) malloc(sizeof(u_int) * 2);
/*
* If that fails, just leave the list empty.
*/
if (handle->dlt_list != NULL) {
handle->dlt_list[0] = DLT_EN10MB;
handle->dlt_list[1] = DLT_DOCSIS;
handle->dlt_count = 2;
}
/* FALLTHROUGH */
case ARPHRD_METRICOM:
case ARPHRD_LOOPBACK:
handle->linktype = DLT_EN10MB;
handle->offset = 2;
break;
case ARPHRD_EETHER:
handle->linktype = DLT_EN3MB;
break;
case ARPHRD_AX25:
handle->linktype = DLT_AX25;
break;
case ARPHRD_PRONET:
handle->linktype = DLT_PRONET;
break;
case ARPHRD_CHAOS:
handle->linktype = DLT_CHAOS;
break;
#ifndef ARPHRD_IEEE802_TR
#define ARPHRD_IEEE802_TR 800 /* From Linux 2.4 */
#endif
case ARPHRD_IEEE802_TR:
case ARPHRD_IEEE802:
handle->linktype = DLT_IEEE802;
handle->offset = 2;
break;
case ARPHRD_ARCNET:
handle->linktype = DLT_ARCNET_LINUX;
break;
#ifndef ARPHRD_FDDI /* From Linux 2.2.13 */
#define ARPHRD_FDDI 774
#endif
case ARPHRD_FDDI:
handle->linktype = DLT_FDDI;
handle->offset = 3;
break;
#ifndef ARPHRD_ATM /* FIXME: How to #include this? */
#define ARPHRD_ATM 19
#endif
case ARPHRD_ATM:
/*
* The Classical IP implementation in ATM for Linux
* supports both what RFC 1483 calls "LLC Encapsulation",
* in which each packet has an LLC header, possibly
* with a SNAP header as well, prepended to it, and
* what RFC 1483 calls "VC Based Multiplexing", in which
* different virtual circuits carry different network
* layer protocols, and no header is prepended to packets.
*
* They both have an ARPHRD_ type of ARPHRD_ATM, so
* you can't use the ARPHRD_ type to find out whether
* captured packets will have an LLC header, and,
* while there's a socket ioctl to *set* the encapsulation
* type, there's no ioctl to *get* the encapsulation type.
*
* This means that
*
* programs that dissect Linux Classical IP frames
* would have to check for an LLC header and,
* depending on whether they see one or not, dissect
* the frame as LLC-encapsulated or as raw IP (I
* don't know whether there's any traffic other than
* IP that would show up on the socket, or whether
* there's any support for IPv6 in the Linux
* Classical IP code);
*
* filter expressions would have to compile into
* code that checks for an LLC header and does
* the right thing.
*
* Both of those are a nuisance - and, at least on systems
* that support PF_PACKET sockets, we don't have to put
* up with those nuisances; instead, we can just capture
* in cooked mode. That's what we'll do, if we can.
* Otherwise, we'll just fail.
*/
if (cooked_ok)
handle->linktype = DLT_LINUX_SLL;
else
handle->linktype = -1;
break;
#ifndef ARPHRD_IEEE80211 /* From Linux 2.4.6 */
#define ARPHRD_IEEE80211 801
#endif
case ARPHRD_IEEE80211:
handle->linktype = DLT_IEEE802_11;
break;
#ifndef ARPHRD_IEEE80211_PRISM /* From Linux 2.4.18 */
#define ARPHRD_IEEE80211_PRISM 802
#endif
case ARPHRD_IEEE80211_PRISM:
handle->linktype = DLT_PRISM_HEADER;
break;
case ARPHRD_PPP:
/*
* Some PPP code in the kernel supplies no link-layer
* header whatsoever to PF_PACKET sockets; other PPP
* code supplies PPP link-layer headers ("syncppp.c");
* some PPP code might supply random link-layer
* headers (PPP over ISDN - there's code in Ethereal,
* for example, to cope with PPP-over-ISDN captures
* with which the Ethereal developers have had to cope,
* heuristically trying to determine which of the
* oddball link-layer headers particular packets have).
*
* As such, we just punt, and run all PPP interfaces
* in cooked mode, if we can; otherwise, we just treat
* it as DLT_RAW, for now - if somebody needs to capture,
* on a 2.0[.x] kernel, on PPP devices that supply a
* link-layer header, they'll have to add code here to
* map to the appropriate DLT_ type (possibly adding a
* new DLT_ type, if necessary).
*/
if (cooked_ok)
handle->linktype = DLT_LINUX_SLL;
else {
/*
* XXX - handle ISDN types here? We can't fall
* back on cooked sockets, so we'd have to
* figure out from the device name what type of
* link-layer encapsulation it's using, and map
* that to an appropriate DLT_ value, meaning
* we'd map "isdnN" devices to DLT_RAW (they
* supply raw IP packets with no link-layer
* header) and "isdY" devices to a new DLT_I4L_IP
* type that has only an Ethernet packet type as
* a link-layer header.
*
* But sometimes we seem to get random crap
* in the link-layer header when capturing on
* ISDN devices....
*/
handle->linktype = DLT_RAW;
}
break;
#ifndef ARPHRD_CISCO
#define ARPHRD_CISCO 513 /* previously ARPHRD_HDLC */
#endif
case ARPHRD_CISCO:
handle->linktype = DLT_C_HDLC;
break;
/* Not sure if this is correct for all tunnels, but it
* works for CIPE */
case ARPHRD_TUNNEL:
#ifndef ARPHRD_SIT
#define ARPHRD_SIT 776 /* From Linux 2.2.13 */
#endif
case ARPHRD_SIT:
case ARPHRD_CSLIP:
case ARPHRD_SLIP6:
case ARPHRD_CSLIP6:
case ARPHRD_ADAPT:
case ARPHRD_SLIP:
#ifndef ARPHRD_RAWHDLC
#define ARPHRD_RAWHDLC 518
#endif
case ARPHRD_RAWHDLC:
#ifndef ARPHRD_DLCI
#define ARPHRD_DLCI 15
#endif
case ARPHRD_DLCI:
/*
* XXX - should some of those be mapped to DLT_LINUX_SLL
* instead? Should we just map all of them to DLT_LINUX_SLL?
*/
handle->linktype = DLT_RAW;
break;
#ifndef ARPHRD_FRAD
#define ARPHRD_FRAD 770
#endif
case ARPHRD_FRAD:
handle->linktype = DLT_FRELAY;
break;
case ARPHRD_LOCALTLK:
handle->linktype = DLT_LTALK;
break;
#ifndef ARPHRD_FCPP
#define ARPHRD_FCPP 784
#endif
case ARPHRD_FCPP:
#ifndef ARPHRD_FCAL
#define ARPHRD_FCAL 785
#endif
case ARPHRD_FCAL:
#ifndef ARPHRD_FCPL
#define ARPHRD_FCPL 786
#endif
case ARPHRD_FCPL:
#ifndef ARPHRD_FCFABRIC
#define ARPHRD_FCFABRIC 787
#endif
case ARPHRD_FCFABRIC:
/*
* We assume that those all mean RFC 2625 IP-over-
* Fibre Channel, with the RFC 2625 header at
* the beginning of the packet.
*/
handle->linktype = DLT_IP_OVER_FC;
break;
#ifndef ARPHRD_IRDA
#define ARPHRD_IRDA 783
#endif
case ARPHRD_IRDA:
/* Don't expect IP packet out of this interfaces... */
handle->linktype = DLT_LINUX_IRDA;
/* We need to save packet direction for IrDA decoding,
* so let's use "Linux-cooked" mode. Jean II */
//handle->md.cooked = 1;
break;
default:
handle->linktype = -1;
break;
}
}
/* ===== Functions to interface to the newer kernels ================== */
/*
* Try to open a packet socket using the new kernel interface.
* Returns 0 on failure.
* FIXME: 0 uses to mean success (Sebastian)
*/
static int
live_open_new(pcap_t *handle, const char *device, int promisc,
int to_ms, char *ebuf)
{
#ifdef HAVE_PF_PACKET_SOCKETS
int sock_fd = -1, arptype;
int err;
int fatal_err = 0;
struct packet_mreq mr;
/* One shot loop used for error handling - bail out with break */
do {
/*
* Open a socket with protocol family packet. If a device is
* given we try to open it in raw mode otherwise we use
* the cooked interface.
*/
sock_fd = device ?
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL))
: socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL));
if (sock_fd == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "socket: %s",
pcap_strerror(errno) );
break;
}
/* It seems the kernel supports the new interface. */
handle->md.sock_packet = 0;
/*
* Get the interface index of the loopback device.
* If the attempt fails, don't fail, just set the
* "md.lo_ifindex" to -1.
*
* XXX - can there be more than one device that loops
* packets back, i.e. devices other than "lo"? If so,
* we'd need to find them all, and have an array of
* indices for them, and check all of them in
* "pcap_read_packet()".
*/
handle->md.lo_ifindex = iface_get_id(sock_fd, "lo", ebuf);
/*
* Default value for offset to align link-layer payload
* on a 4-byte boundary.
*/
handle->offset = 0;
/*
* What kind of frames do we have to deal with? Fall back
* to cooked mode if we have an unknown interface type.
*/
if (device) {
/* Assume for now we don't need cooked mode. */
handle->md.cooked = 0;
arptype = iface_get_arptype(sock_fd, device, ebuf);
if (arptype == -1) {
fatal_err = 1;
break;
}
map_arphrd_to_dlt(handle, arptype, 1);
if (handle->linktype == -1 ||
handle->linktype == DLT_LINUX_SLL ||
handle->linktype == DLT_LINUX_IRDA ||
(handle->linktype == DLT_EN10MB &&
(strncmp("isdn", device, 4) == 0 ||
strncmp("isdY", device, 4) == 0))) {
/*
* Unknown interface type (-1), or a
* device we explicitly chose to run
* in cooked mode (e.g., PPP devices),
* or an ISDN device (whose link-layer
* type we can only determine by using
* APIs that may be different on different
* kernels) - reopen in cooked mode.
*/
if (close(sock_fd) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"close: %s", pcap_strerror(errno));
break;
}
sock_fd = socket(PF_PACKET, SOCK_DGRAM,
htons(ETH_P_ALL));
if (sock_fd == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"socket: %s", pcap_strerror(errno));
break;
}
handle->md.cooked = 1;
/*
* Get rid of any link-layer type list
* we allocated - this only supports cooked
* capture.
*/
if (handle->dlt_list != NULL) {
free(handle->dlt_list);
handle->dlt_list = NULL;
handle->dlt_count = 0;
}
if (handle->linktype == -1) {
/*
* Warn that we're falling back on
* cooked mode; we may want to
* update "map_arphrd_to_dlt()"
* to handle the new type.
*/
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"arptype %d not "
"supported by libpcap - "
"falling back to cooked "
"socket",
arptype);
}
/* IrDA capture is not a real "cooked" capture,
* it's IrLAP frames, not IP packets. */
if (handle->linktype != DLT_LINUX_IRDA)
handle->linktype = DLT_LINUX_SLL;
}
handle->md.ifindex = iface_get_id(sock_fd, device, ebuf);
if (handle->md.ifindex == -1)
break;
if ((err = iface_bind(sock_fd, handle->md.ifindex,
ebuf)) < 0) {
if (err == -2)
fatal_err = 1;
break;
}
} else {
/*
* This is cooked mode.
*/
handle->md.cooked = 1;
handle->linktype = DLT_LINUX_SLL;
/*
* We're not bound to a device.
* XXX - true? Or true only if we're using
* the "any" device?
* For now, we're using this as an indication
* that we can't transmit; stop doing that only
* if we figure out how to transmit in cooked
* mode.
*/
handle->md.ifindex = -1;
}
/*
* Select promiscuous mode on if "promisc" is set.
*
* Do not turn allmulti mode on if we don't select
* promiscuous mode - on some devices (e.g., Orinoco
* wireless interfaces), allmulti mode isn't supported
* and the driver implements it by turning promiscuous
* mode on, and that screws up the operation of the
* card as a normal networking interface, and on no
* other platform I know of does starting a non-
* promiscuous capture affect which multicast packets
* are received by the interface.
*/
/*
* Hmm, how can we set promiscuous mode on all interfaces?
* I am not sure if that is possible at all.
*/
if (device && promisc) {
memset(&mr, 0, sizeof(mr));
mr.mr_ifindex = handle->md.ifindex;
mr.mr_type = PACKET_MR_PROMISC;
if (setsockopt(sock_fd, SOL_PACKET,
PACKET_ADD_MEMBERSHIP, &mr, sizeof(mr)) == -1)
{
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"setsockopt: %s", pcap_strerror(errno));
break;
}
}
/* Save the socket FD in the pcap structure */
handle->fd = sock_fd;
return 1;
} while(0);
if (sock_fd != -1)
close(sock_fd);
if (fatal_err) {
/*
* Get rid of any link-layer type list we allocated.
*/
if (handle->dlt_list != NULL)
free(handle->dlt_list);
return -2;
} else
return 0;
#else
strncpy(ebuf,
"New packet capturing interface not supported by build "
"environment", PCAP_ERRBUF_SIZE);
return 0;
#endif
}
#ifdef HAVE_PF_PACKET_SOCKETS
/*
* Return the index of the given device name. Fill ebuf and return
* -1 on failure.
*/
static int
iface_get_id(int fd, const char *device, char *ebuf)
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
if (ioctl(fd, SIOCGIFINDEX, &ifr) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"ioctl: %s", pcap_strerror(errno));
return -1;
}
return ifr.ifr_ifindex;
}
/*
* Bind the socket associated with FD to the given device.
*/
static int
iface_bind(int fd, int ifindex, char *ebuf)
{
struct sockaddr_ll sll;
int err;
socklen_t errlen = sizeof(err);
memset(&sll, 0, sizeof(sll));
sll.sll_family = AF_PACKET;
sll.sll_ifindex = ifindex;
sll.sll_protocol = htons(ETH_P_ALL);
if (bind(fd, (struct sockaddr *) &sll, sizeof(sll)) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"bind: %s", pcap_strerror(errno));
return -1;
}
/* Any pending errors, e.g., network is down? */
if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"getsockopt: %s", pcap_strerror(errno));
return -2;
}
if (err > 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"bind: %s", pcap_strerror(err));
return -2;
}
return 0;
}
#endif
/* ===== Functions to interface to the older kernels ================== */
/*
* With older kernels promiscuous mode is kind of interesting because we
* have to reset the interface before exiting. The problem can't really
* be solved without some daemon taking care of managing usage counts.
* If we put the interface into promiscuous mode, we set a flag indicating
* that we must take it out of that mode when the interface is closed,
* and, when closing the interface, if that flag is set we take it out
* of promiscuous mode.
*/
/*
* List of pcaps for which we turned promiscuous mode on by hand.
* If there are any such pcaps, we arrange to call "pcap_close_all()"
* when we exit, and have it close all of them to turn promiscuous mode
* off.
*/
static struct pcap *pcaps_to_close;
/*
* TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
* be called on exit.
*/
static int did_atexit;
static void pcap_close_all(void)
{
struct pcap *handle;
while ((handle = pcaps_to_close) != NULL)
pcap_close(handle);
}
static void pcap_close_linux( pcap_t *handle )
{
struct pcap *p, *prevp;
struct ifreq ifr;
if (handle->md.clear_promisc) {
/*
* We put the interface into promiscuous mode; take
* it out of promiscuous mode.
*
* XXX - if somebody else wants it in promiscuous mode,
* this code cannot know that, so it'll take it out
* of promiscuous mode. That's not fixable in 2.0[.x]
* kernels.
*/
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, handle->md.device, sizeof(ifr.ifr_name));
if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) {
fprintf(stderr,
"Can't restore interface flags (SIOCGIFFLAGS failed: %s).\n"
"Please adjust manually.\n"
"Hint: This can't happen with Linux >= 2.2.0.\n",
strerror(errno));
} else {
if (ifr.ifr_flags & IFF_PROMISC) {
/*
* Promiscuous mode is currently on; turn it
* off.
*/
ifr.ifr_flags &= ~IFF_PROMISC;
if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) {
fprintf(stderr,
"Can't restore interface flags (SIOCSIFFLAGS failed: %s).\n"
"Please adjust manually.\n"
"Hint: This can't happen with Linux >= 2.2.0.\n",
strerror(errno));
}
}
}
/*
* Take this pcap out of the list of pcaps for which we
* have to take the interface out of promiscuous mode.
*/
for (p = pcaps_to_close, prevp = NULL; p != NULL;
prevp = p, p = p->md.next) {
if (p == handle) {
/*
* Found it. Remove it from the list.
*/
if (prevp == NULL) {
/*
* It was at the head of the list.
*/
pcaps_to_close = p->md.next;
} else {
/*
* It was in the middle of the list.
*/
prevp->md.next = p->md.next;
}
break;
}
}
}
if (handle->md.device != NULL)
free(handle->md.device);
handle->md.device = NULL;
pcap_close_common(handle);
}
/*
* Try to open a packet socket using the old kernel interface.
* Returns 0 on failure.
* FIXME: 0 uses to mean success (Sebastian)
*/
static int
live_open_old(pcap_t *handle, const char *device, int promisc,
int to_ms, char *ebuf)
{
int arptype;
struct ifreq ifr;
do {
/* Open the socket */
handle->fd = socket(PF_INET, SOCK_PACKET, htons(ETH_P_ALL));
if (handle->fd == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"socket: %s", pcap_strerror(errno));
break;
}
/* It worked - we are using the old interface */
handle->md.sock_packet = 1;
/* ...which means we get the link-layer header. */
handle->md.cooked = 0;
/* Bind to the given device */
if (!device) {
strncpy(ebuf, "pcap_open_live: The \"any\" device isn't supported on 2.0[.x]-kernel systems",
PCAP_ERRBUF_SIZE);
break;
}
if (iface_bind_old(handle->fd, device, ebuf) == -1)
break;
/*
* Try to get the link-layer type.
*/
arptype = iface_get_arptype(handle->fd, device, ebuf);
if (arptype == -1)
break;
/*
* Try to find the DLT_ type corresponding to that
* link-layer type.
*/
map_arphrd_to_dlt(handle, arptype, 0);
if (handle->linktype == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"unknown arptype %d", arptype);
break;
}
/* Go to promisc mode if requested */
if (promisc) {
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"ioctl: %s", pcap_strerror(errno));
break;
}
if ((ifr.ifr_flags & IFF_PROMISC) == 0) {
/*
* Promiscuous mode isn't currently on,
* so turn it on, and remember that
* we should turn it off when the
* pcap_t is closed.
*/
/*
* If we haven't already done so, arrange
* to have "pcap_close_all()" called when
* we exit.
*/
if (!did_atexit) {
if (atexit(pcap_close_all) == -1) {
/*
* "atexit()" failed; don't
* put the interface in
* promiscuous mode, just
* give up.
*/
strncpy(ebuf, "atexit failed",
PCAP_ERRBUF_SIZE);
break;
}
did_atexit = 1;
}
ifr.ifr_flags |= IFF_PROMISC;
if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"ioctl: %s",
pcap_strerror(errno));
break;
}
handle->md.clear_promisc = 1;
/*
* Add this to the list of pcaps
* to close when we exit.
*/
handle->md.next = pcaps_to_close;
pcaps_to_close = handle;
}
}
/*
* Default value for offset to align link-layer payload
* on a 4-byte boundary.
*/
handle->offset = 0;
return 1;
} while (0);
pcap_close_linux(handle);
return 0;
}
/*
* Bind the socket associated with FD to the given device using the
* interface of the old kernels.
*/
static int
iface_bind_old(int fd, const char *device, char *ebuf)
{
struct sockaddr saddr;
int err;
socklen_t errlen = sizeof(err);
memset(&saddr, 0, sizeof(saddr));
strncpy(saddr.sa_data, device, sizeof(saddr.sa_data));
if (bind(fd, &saddr, sizeof(saddr)) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"bind: %s", pcap_strerror(errno));
return -1;
}
/* Any pending errors, e.g., network is down? */
if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"getsockopt: %s", pcap_strerror(errno));
return -1;
}
if (err > 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"bind: %s", pcap_strerror(err));
return -1;
}
return 0;
}
/* ===== System calls available on all supported kernels ============== */
/*
* Query the kernel for the MTU of the given interface.
*/
static int
iface_get_mtu(int fd, const char *device, char *ebuf)
{
struct ifreq ifr;
if (!device)
return BIGGER_THAN_ALL_MTUS;
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
if (ioctl(fd, SIOCGIFMTU, &ifr) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"ioctl: %s", pcap_strerror(errno));
return -1;
}
return ifr.ifr_mtu;
}
/*
* Get the hardware type of the given interface as ARPHRD_xxx constant.
*/
static int
iface_get_arptype(int fd, const char *device, char *ebuf)
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"ioctl: %s", pcap_strerror(errno));
return -1;
}
return ifr.ifr_hwaddr.sa_family;
}
#ifdef SO_ATTACH_FILTER
static int
fix_program(pcap_t *handle, struct sock_fprog *fcode)
{
size_t prog_size;
register int i;
register struct bpf_insn *p;
struct bpf_insn *f;
int len;
/*
* Make a copy of the filter, and modify that copy if
* necessary.
*/
prog_size = sizeof(*handle->fcode.bf_insns) * handle->fcode.bf_len;
len = handle->fcode.bf_len;
f = (struct bpf_insn *)malloc(prog_size);
if (f == NULL) {
snprintf(handle->errbuf, sizeof(handle->errbuf),
"malloc: %s", pcap_strerror(errno));
return -1;
}
memcpy(f, handle->fcode.bf_insns, prog_size);
fcode->len = len;
fcode->filter = (struct sock_filter *) f;
for (i = 0; i < len; ++i) {
p = &f[i];
/*
* What type of instruction is this?
*/
switch (BPF_CLASS(p->code)) {
case BPF_RET:
/*
* It's a return instruction; is the snapshot
* length a constant, rather than the contents
* of the accumulator?
*/
if (BPF_MODE(p->code) == BPF_K) {
/*
* Yes - if the value to be returned,
* i.e. the snapshot length, is anything
* other than 0, make it 65535, so that
* the packet is truncated by "recvfrom()",
* not by the filter.
*
* XXX - there's nothing we can easily do
* if it's getting the value from the
* accumulator; we'd have to insert
* code to force non-zero values to be
* 65535.
*/
if (p->k != 0)
p->k = 65535;
}
break;
case BPF_LD:
case BPF_LDX:
/*
* It's a load instruction; is it loading
* from the packet?
*/
switch (BPF_MODE(p->code)) {
case BPF_ABS:
case BPF_IND:
case BPF_MSH:
/*
* Yes; are we in cooked mode?
*/
if (handle->md.cooked) {
/*
* Yes, so we need to fix this
* instruction.
*/
if (fix_offset(p) < 0) {
/*
* We failed to do so.
* Return 0, so our caller
* knows to punt to userland.
*/
return 0;
}
}
break;
}
break;
}
}
return 1; /* we succeeded */
}
static int
fix_offset(struct bpf_insn *p)
{
/*
* What's the offset?
*/
if (p->k >= SLL_HDR_LEN) {
/*
* It's within the link-layer payload; that starts at an
* offset of 0, as far as the kernel packet filter is
* concerned, so subtract the length of the link-layer
* header.
*/
p->k -= SLL_HDR_LEN;
} else if (p->k == 14) {
/*
* It's the protocol field; map it to the special magic
* kernel offset for that field.
*/
p->k = SKF_AD_OFF + SKF_AD_PROTOCOL;
} else {
/*
* It's within the header, but it's not one of those
* fields; we can't do that in the kernel, so punt
* to userland.
*/
return -1;
}
return 0;
}
static int
set_kernel_filter(pcap_t *handle, struct sock_fprog *fcode)
{
int total_filter_on = 0;
int save_mode;
int ret;
int save_errno;
/*
* The socket filter code doesn't discard all packets queued
* up on the socket when the filter is changed; this means
* that packets that don't match the new filter may show up
* after the new filter is put onto the socket, if those
* packets haven't yet been read.
*
* This means, for example, that if you do a tcpdump capture
* with a filter, the first few packets in the capture might
* be packets that wouldn't have passed the filter.
*
* We therefore discard all packets queued up on the socket
* when setting a kernel filter. (This isn't an issue for
* userland filters, as the userland filtering is done after
* packets are queued up.)
*
* To flush those packets, we put the socket in read-only mode,
* and read packets from the socket until there are no more to
* read.
*
* In order to keep that from being an infinite loop - i.e.,
* to keep more packets from arriving while we're draining
* the queue - we put the "total filter", which is a filter
* that rejects all packets, onto the socket before draining
* the queue.
*
* This code deliberately ignores any errors, so that you may
* get bogus packets if an error occurs, rather than having
* the filtering done in userland even if it could have been
* done in the kernel.
*/
if (setsockopt(handle->fd, SOL_SOCKET, SO_ATTACH_FILTER,
&total_fcode, sizeof(total_fcode)) == 0) {
char drain[1];
/*
* Note that we've put the total filter onto the socket.
*/
total_filter_on = 1;
/*
* Save the socket's current mode, and put it in
* non-blocking mode; we drain it by reading packets
* until we get an error (which is normally a
* "nothing more to be read" error).
*/
save_mode = fcntl(handle->fd, F_GETFL, 0);
if (save_mode != -1 &&
fcntl(handle->fd, F_SETFL, save_mode | O_NONBLOCK) >= 0) {
while (recv(handle->fd, &drain, sizeof drain,
MSG_TRUNC) >= 0)
;
save_errno = errno;
fcntl(handle->fd, F_SETFL, save_mode);
if (save_errno != EAGAIN) {
/* Fatal error */
reset_kernel_filter(handle);
snprintf(handle->errbuf, sizeof(handle->errbuf),
"recv: %s", pcap_strerror(save_errno));
return -2;
}
}
}
/*
* Now attach the new filter.
*/
ret = setsockopt(handle->fd, SOL_SOCKET, SO_ATTACH_FILTER,
fcode, sizeof(*fcode));
if (ret == -1 && total_filter_on) {
/*
* Well, we couldn't set that filter on the socket,
* but we could set the total filter on the socket.
*
* This could, for example, mean that the filter was
* too big to put into the kernel, so we'll have to
* filter in userland; in any case, we'll be doing
* filtering in userland, so we need to remove the
* total filter so we see packets.
*/
save_errno = errno;
/*
* XXX - if this fails, we're really screwed;
* we have the total filter on the socket,
* and it won't come off. What do we do then?
*/
reset_kernel_filter(handle);
errno = save_errno;
}
return ret;
}
static int
reset_kernel_filter(pcap_t *handle)
{
/* setsockopt() barfs unless it get a dummy parameter */
int dummy;
return setsockopt(handle->fd, SOL_SOCKET, SO_DETACH_FILTER,
&dummy, sizeof(dummy));
}
#endif
View Git Blame Copy Permalink