![oej](/assets/img/avatar_default.png)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@9047 f38db490-d61c-443f-a65b-d21fe96a405b
45 lines
2 KiB
Text
45 lines
2 KiB
Text
Implementing a Channel
|
|
======================
|
|
|
|
* What is a channel?
|
|
|
|
A channel is a unit which brings in a call to the Asterisk PBX. A channel
|
|
could be connected to a real telephone (like the Internet Phone Jack) or
|
|
to a logical call (like an Internet phone call). Asterisk makes no
|
|
distinction between "FXO" and "FXS" style channels (that is, it doesn't
|
|
distinguish between telephone lines and telephones).
|
|
|
|
Every call is placed or received on a distinct channel. Asterisk uses a
|
|
channel driver (typically named chan_xxx.so) to support each type of
|
|
hardware.
|
|
|
|
* What do I need to create a channel?
|
|
|
|
In order to support a new piece of hardware you need to write a channel
|
|
driver. The easiest way to do so is to look at an existing channel driver
|
|
and model your own code after it.
|
|
|
|
* What's the general architecture?
|
|
|
|
Typically, a channel reads a configuration file on startup which tells it
|
|
something about the hardware it's going to be servicing. Then, it
|
|
launches a thread which monitors all the idle channels (See the chan_modem
|
|
or the chan_ixj for an example of this). When a "RING" or equivalent is
|
|
detected, the monitoring thread should allocate a channel structure and
|
|
assign all the callbacks to it (see ixj_new, for example), and then call
|
|
ast_pbx_start on that channel. ast_pbx_start will launch a new thread to
|
|
handle the channel as long as the call is up, so once pbx_start has
|
|
successfully been run, the monitor should no longer monitor that channel.
|
|
The PBX thread will use the channel, reading, writing, calling, etc., and
|
|
multiplexing that channel with others using select() on the channel's
|
|
file descriptor (if your channel doesn't have an associated file
|
|
descriptor, you'll need to emulate one somehow, perhaps along the lines of
|
|
what the translator API does with its channel.
|
|
|
|
When the PBX is finished with the line, it will hang up the line, at which
|
|
point it the hardware should again be monitored by the monitoring thread.
|
|
|
|
---------------
|
|
For more information, please consult the Asterisk Developer's Documentation
|
|
on http://www.asterisk.org
|