https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r220027 | mvanbaak | 2009-09-24 10:33:50 +0200 (Thu, 24 Sep 2009) | 7 lines
mkpkgconfig does not need bash so make it use /bin/sh
This fixes building on all systems that don't have bash
at /bin/bash
Reported by _ys on #asterisk-dev
Tested by _ys on #asterisk-dev
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@220028 f38db490-d61c-443f-a65b-d21fe96a405b
Ensure that add-on modules can be embedded, fix up Makefile.moddir_rules
to allow module directory Makefiles to more easily specify the modules to
be built, and explicitly list the addons modules in its Makefile, since
the module names don't follow any pattern.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@204415 f38db490-d61c-443f-a65b-d21fe96a405b
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@204413 f38db490-d61c-443f-a65b-d21fe96a405b
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@203846 f38db490-d61c-443f-a65b-d21fe96a405b
also added support for skip category request feature of openr2 and updated chan_dahdi.conf.sample
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@200477 f38db490-d61c-443f-a65b-d21fe96a405b
This commit add Calendaring support to Asterisk for iCalendar, CalDAV, and MS
Exchange calendars. Exchange support has only been tested on Exchange Server 2k3
and does not support forms-based authentication at this time (patches *very*
welcome). Exchange support is also currently missing the ability to return a
list of a meting's attendees (again, patches are very, very welcome).
Features include:
Querying a calendar for events over a specific time range
Checking a calendar's busy status via the dialplan
Writing calendar events via the dialplan (CalDAV and Exchange only)
Handling calendar event notifications through the dialplan
(closes issue #14771)
Tested by: lmadsen, twilson, Shivaprakash
Review: https://reviewboard.asterisk.org/r/58
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197738 f38db490-d61c-443f-a65b-d21fe96a405b
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@190423 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182808 | kpfleming | 2009-03-17 20:55:22 -0500 (Tue, 17 Mar 2009) | 5 lines
Improve the build system to *properly* remove unnecessary symbols from the runtime global namespace. Along the way, change the prefixes on some internal-only API calls to use a common prefix.
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@182826 f38db490-d61c-443f-a65b-d21fe96a405b
this stops modules from being linked against both sets of libraries on systems that have both installed
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@168734 f38db490-d61c-443f-a65b-d21fe96a405b
We dont want to scare users with this, so we added a devmode compile flag
(closes issue #13952)
Reported by: wedhorn
Patches:
packetdebug3.diff uploaded by wedhorn (license 30)
Tested by: mvanbaak, wedhorn
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@160938 f38db490-d61c-443f-a65b-d21fe96a405b
This provides a new timing interface. In order to use it,
you must be running a Linux with a kernel version of
2.6.25 or newer and glibc 2.8 or newer.
This timing interface is a good alternative if a timing
source is necessary (e.g. for IAX trunking) but DAHDI is
otherwise unnecessary for the system.
For now, this commit contains the actual work done in the
res_timing_timerfd branch. There are no notices in the README
or CHANGES files yet, but they will be added in my next commit.
The timing API of Asterisk also needs to have a bit of work done
with regards to choosing which timing interface to use. This commit
makes the choice a build-time decision, by only allowing one of
the timer interfaces to be chosen in menuselect. It would be preferable
if the choice could be made at run-time, however. The preferred timing
interface could be loaded and tested, and if it does not work, choice
number two may be used instead. That sort of thing. That is beyond
the scope of work in this branch though.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@157820 f38db490-d61c-443f-a65b-d21fe96a405b
along the way, change tags used in configure script, menuselect-deps and code for various dependencies to be consistently named
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@154151 f38db490-d61c-443f-a65b-d21fe96a405b
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@153365 f38db490-d61c-443f-a65b-d21fe96a405b
This allows for the ODBC parts to work on OpenBSD as well.
99.99% of the work is done by seanbright (bow, bow) and I actually
did nothing but test and yell at him that it still didn't work :)
Thanks for helping out !
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@146925 f38db490-d61c-443f-a65b-d21fe96a405b
md5 installed on it. So look around for all of the different binaries
that we could possibly use. I'd wager this gets completely replaced
by someone else in less than 24 hours... :)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@146407 f38db490-d61c-443f-a65b-d21fe96a405b
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@132390 f38db490-d61c-443f-a65b-d21fe96a405b
To make sure nobody commits script-modified files we first make a backup
of asterisk.tex, run the script, generate the pdf and / or html,
and put the original asterisk.tex back.
This will guard us for the stuff that happened before that someone committed
a locally modified asterisk.tex, with changes done by this script.
(closes issue #13062)
Reported by: mvanbaak
Patches:
sed_without-i-v3.diff uploaded by mvanbaak (license 7)
Tested by: mvanbaak
Feedback from Corydon. Thanks for taking the time to go through this.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130578 f38db490-d61c-443f-a65b-d21fe96a405b
the checks for the CLM and EVT services from the SAForum AIS. I'm going to work
on merging in changes from this branch in pieces.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121403 f38db490-d61c-443f-a65b-d21fe96a405b
display this information in the "core show settings" CLI command. This is
useful if you want to verify that you're running a build with DONT_OPTIMIZE,
DEBUG_THREADS, etc.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117756 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109973 | qwell | 2008-03-19 12:12:52 -0500 (Wed, 19 Mar 2008) | 5 lines
People report bugs about Asterisk crashing with DO_CRASH enabled was getting a little silly...
Now we only show certain cflags when you run configure with --enable-dev-mode
(corresponding menuselect change to follow)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@109974 f38db490-d61c-443f-a65b-d21fe96a405b
This does introduce a dependency on the GMime library for handling HTTP POSTs, but it is available in most distros.
If the library is present, then the compile flag for ENABLE_UPLOADS is enabled by default in menuselect.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@109229 f38db490-d61c-443f-a65b-d21fe96a405b
automatically generated file like it used to be. This still needs to be there
for modules that have to check it to compile against multiple asterisk versions.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@104244 f38db490-d61c-443f-a65b-d21fe96a405b
seanbright