Action ZapShowChannels
Header changes
- Channel: -> ZapChannel
For active channels, the Channel: and Uniqueid: headers are added
You can now add a "ZapChannel: " argument to zapshowchannels actions
to only get information about one channel.
From the moremanager branch
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@91386 f38db490-d61c-443f-a65b-d21fe96a405b
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90949 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90735 | mmichelson | 2007-12-03 17:12:17 -0600 (Mon, 03 Dec 2007) | 22 lines
A big one...
This is the merge of the forward-loop branch. The main change here is that call-forwards can no longer loop.
This is accomplished by creating a datastore on the calling channel which has a linked list of all devices
dialed. If a forward happens, then the local channel which is created inherits the datastore. If, through this
progression of forwards and datastore inheritance, a device is attempted to be dialed a second time, it will simply
be skipped and a warning message will be printed to the CLI. After the dialing has been completed, the datastore
is detached from the channel and destroyed.
This change also introduces some side effects to the code which I shall enumerate here:
1. Datastore inheritance has been backported from trunk into 1.4
2. A large chunk of code has been removed from app_dial. This chunk is the section of code
which handles the call forward case after the channel has been requested but before it has
been called. This was removed because call-forwarding still works fine without it, it makes the
code less error-prone should it need changing, and it made this set of changes much less painful
to just have the forwarding handled in one place in each module.
3. Two new files, global_datastores.h and .c have been added. These are necessary since the datastore
which is attached to the channel may be created and attached in either app_dial or app_queue, so they
need a common place to find the datastore info. This approach was taken in case similar datastores are
needed in the future, there will be a common place to add them.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90873 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90351 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is an optimization for chan_iax2. This module is now heavily
multi-threaded. However, there is still a good number of globally shared
resources that prevent things from happen asynchronously. One of those things
was the global IAX frame queue. This queue was used to hold frames that have
been deferred for transmitting by another thread, and frames that may need to
get retransmitted.
I changed the frame queue to be per-call, since almost all of the frame queue
handling only cares about frames specific to a call number.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89887 f38db490-d61c-443f-a65b-d21fe96a405b
This replaces tab completion code with the use of a public function that
does the same thing
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89835 f38db490-d61c-443f-a65b-d21fe96a405b
Also by accident fixed a bad typo by a previous committer, which actually made video calls
not work fully...
Merged revisions 89630 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89630 | oej | 2007-11-27 16:23:17 +0100 (Tis, 27 Nov 2007) | 12 lines
If we get a codec offer using a well-known payload type, but using it for another
codec that we don't know, Asterisk did not remove that codec from the list.
With this patch, we remove the codec from audio and video rtp objects and
deny it ever existed. Thanks to lasse for testing.
(closes issue #11376)
Reported by: lasse
Patches:
bug11376.txt uploaded by oej (license 306)
Tested by: lasse
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89698 f38db490-d61c-443f-a65b-d21fe96a405b
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89554 f38db490-d61c-443f-a65b-d21fe96a405b
- Fix typo in chan_sip
- Remove changes to caller ID structure, moving it to branch (russellb)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89551 f38db490-d61c-443f-a65b-d21fe96a405b
If needed, the code to extract this information should be implemented
in some generic header or library and the function called here.
(closed bug #11362)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89543 f38db490-d61c-443f-a65b-d21fe96a405b
This is a NOP as far as the current code is concerned,
but there is already support in ./configure and the
Makefiles for the various libraries used by console_video.c
(not yet in the tree) so addition is trivial.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89533 f38db490-d61c-443f-a65b-d21fe96a405b
make the format explicit in a debug message;
print the audio instead of aggregated peer capability in a debugging msg.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89532 f38db490-d61c-443f-a65b-d21fe96a405b
writing to the wrong byte. Also, remove some non-thread safe test code.
(closes issue #11317)
Reported by: IgorG
Patches:
unistim-2.patch uploaded by IgorG (license 20)
- additional changes by me
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89484 f38db490-d61c-443f-a65b-d21fe96a405b
After this commit we can actually load modules under windows,
and we can start debugging more interesting problems related
to the load order and functionality of modules.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89454 f38db490-d61c-443f-a65b-d21fe96a405b
with the SIPPEER() argument of the same name. The deprecation procedure is not
being used here since this is a trunk-only option.
(closes issue #11307, reported by pj, patched by me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89441 f38db490-d61c-443f-a65b-d21fe96a405b
With this, you can control the peer in the dialplan, so you avoid placing outbound
calls when the device has reached busy-level.
Reported by pj.
Closes bug #11180
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89406 f38db490-d61c-443f-a65b-d21fe96a405b
the bug tracker. Since we don't authenticate devices (peers/users) on OPTIONS we don't
have the proper context set for the user/peer.
However, we might not want to process an authentication for every OPTIONS, so we could
have a config option for this, "optionsforceok" to always answer 200 OK on the request
and not check device or destination, nor add a SDP. If Asterisk sends the OPTIONs request,
it doesn't care about the reply. Some devices use OPTIONs to discover capabilities,
since we should answer like an INVITE from the device and we need to support that properly
too, which we don't today.
So much to do :-)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89404 f38db490-d61c-443f-a65b-d21fe96a405b
(this should be handled with the dependencies generated by
configure and menuselect, but will be fixed later)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89366 f38db490-d61c-443f-a65b-d21fe96a405b
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89333 f38db490-d61c-443f-a65b-d21fe96a405b
so it can be reused in the implementation of cli commands when
they have a similar syntax.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89320 f38db490-d61c-443f-a65b-d21fe96a405b
solution, it breaks communication.
Rizzo - you need to implement a configuration option for this
code. It's good, but maybe should be off by default.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89285 f38db490-d61c-443f-a65b-d21fe96a405b
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89278 f38db490-d61c-443f-a65b-d21fe96a405b
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89268 f38db490-d61c-443f-a65b-d21fe96a405b
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89202 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89173 | crichter | 2007-11-12 12:26:48 +0100 (Mo, 12 Nov 2007) | 1 line
if we're NT and no number was dialed and overlapdial is set, we wait for the ISDN timeout instead of starting our own timer. added a comment for the misdn.conf.sample for the overlapdial config option.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89179 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89172 | crichter | 2007-11-12 12:23:57 +0100 (Mo, 12 Nov 2007) | 1 line
added restart all interfaces Restart_Indicator, to automatically send a RESTART after the L2 of a PTP Port comes up. Also fixed some places where we have send a RELEASE without need for it.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89178 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89171 | crichter | 2007-11-12 12:13:13 +0100 (Mo, 12 Nov 2007) | 1 line
fixed a state/event issue with overlapdial=yes when no extension matched. removed the general sending of a RELEASE_COMPLETE when we receive a RELEASE, this is done by mISDNuser/mISDN. This makes it possible to use asterisk-1.4 with mISDN trunk, but requires users of mISDN/mISDNuser-1.1.X to upgrade to at least mISDNuser-1.1.6 (when using the NT mode at all)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89176 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89174 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89119 | mmichelson | 2007-11-08 15:00:08 -0600 (Thu, 08 Nov 2007) | 7 lines
Rework of the commit I made yesterday to use the already built-in
ast_uri_decode function as opposed to my home-rolled one. Also added
comments.
Thanks to oej for pointing me in the right direction
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89120 f38db490-d61c-443f-a65b-d21fe96a405b
The type of warnings emitted depends on the optimization level,
at the lower levels the compiler doesn't always understand what the
programmer has in mind. In this case I could not understand it either.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89108 f38db490-d61c-443f-a65b-d21fe96a405b
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89106 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89099 | file | 2007-11-07 21:28:56 -0400 (Wed, 07 Nov 2007) | 6 lines
Improve the devicestate logic for multiple devices. If any are available then the extension is considered available.
(closes issue #10164)
Reported by: nic_bellamy
Patches:
sip-hinting-svn-branch-1.4.patch uploaded by nic (license 299)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89100 f38db490-d61c-443f-a65b-d21fe96a405b
qwell