This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@326855 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321042 | twilson | 2011-05-26 10:29:54 -0700 (Thu, 26 May 2011) | 6 lines
Initialize stack-allocated ast_sockaddrs before use
It is important to always initialize ast_sockaddrs before use--even if they
are passed to ast_sockaddr_copy as the underlying storage could be bigger
than what ends up being copied--leaving part of the data unitialized.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@321043 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316265 | russell | 2011-05-03 14:55:49 -0500 (Tue, 03 May 2011) | 5 lines
Fix a bunch of compiler warnings generated by gcc 4.6.0.
Most of these are -Wunused-but-set-variable, but there were a few others
mixed in here, as well.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@316293 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314018 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310287 | alecdavis | 2011-03-11 19:47:44 +1300 (Fri, 11 Mar 2011) | 17 lines
remote_bridge_loop: prevent segfault when after transfer of IAX2 of DAHDI call
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@310288 f38db490-d61c-443f-a65b-d21fe96a405b
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@308582 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@299091 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293809 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@289841 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@284479 f38db490-d61c-443f-a65b-d21fe96a405b
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@268894 f38db490-d61c-443f-a65b-d21fe96a405b
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@263541 f38db490-d61c-443f-a65b-d21fe96a405b
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@252089 f38db490-d61c-443f-a65b-d21fe96a405b
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@231850 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@221266 f38db490-d61c-443f-a65b-d21fe96a405b
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@208464 f38db490-d61c-443f-a65b-d21fe96a405b
The code will now only change the address and port. It will not overwrite any other values.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@187773 f38db490-d61c-443f-a65b-d21fe96a405b
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@186078 f38db490-d61c-443f-a65b-d21fe96a405b
dvossel