it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@158959 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158603 | murf | 2008-11-21 16:14:50 -0700 (Fri, 21 Nov 2008) | 11 lines
In reference to the fix made for 13871, I was
merging the fix into 1.6.0 and realized I missed
the code in the h-exten block, and didn't catch it
because my test case had the h-exten commented out.
So, this corrects the code I missed, as a
preventative against another crash report.
Tested with the h-exten defined, all is well.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@158606 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158483 | murf | 2008-11-21 14:19:47 -0700 (Fri, 21 Nov 2008) | 11 lines
(closes issue #13871)
Reported by: mdu113
This one is totally my fault. The code doesn't even
create a bridge CDR if the channel CDR has POST_DISABLED.
I didn't check for that at the end of the bridge.
Fixed with a few small insertions. Tested. Looks
good. No cdr generated, no crash, no unnecc. data
objects created either.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@158484 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157305 | mmichelson | 2008-11-18 12:25:55 -0600 (Tue, 18 Nov 2008) | 12 lines
Fix a crash in the end_bridge_callback of app_dial and
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@157306 f38db490-d61c-443f-a65b-d21fe96a405b
ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@155590 f38db490-d61c-443f-a65b-d21fe96a405b
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@155401 f38db490-d61c-443f-a65b-d21fe96a405b
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@153365 f38db490-d61c-443f-a65b-d21fe96a405b
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@152807 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@152536 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146026 | murf | 2008-10-03 12:12:54 -0500 (Fri, 03 Oct 2008) | 18 lines
(closes issue #13579)
Reported by: dwagner
(closes issue #13584)
Reported by: dwagner
Tested by: murf, putnopvut
The thought occurred to me that the res= from the extension spawn
was ending up being returned from the bridge.
"Thou shalt not poison the return value". Made the change
and it appears to allow blind xfers to work as normal.
If I'm wrong, reopen the bugs. But it looks good to me!
Many thanks to putnopvut for helping me reproduce this!
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@148112 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: krisk84
Tested by: krisk84
This change prevents a call that is placed in the parkinglot to be picked up before the PBX is finished. If another extension dials the parking extension before the PBX thread has completed at minimum warnings will occur about the PBX not properly being terminated. At worst, a crash could occur.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@147952 f38db490-d61c-443f-a65b-d21fe96a405b
1) r143204:
The main change here was to masquerade the channel if the channel that was to be parked was running a PBX on it. The PBX thread can then maintain full control of the channel (the zombie) as it expects to while allowing the parking thread full control of the real (parked) channel.
2) r143270:
Changed park_call_full to hold the parkinglot lock a little longer, which protects the parkeduser struct from being freed out from underneath. Made sure that the parking extension is added to the parking context while holding the lock thereby ensuring that there are no spurious warnings from removal attempts when a hangup occurs while the parking lot is being announced.
3) r143475: (the one liner)
compare peer and chan instead of looking at the parked user (pu), which could have possibly already have been freed by the parking thread
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@146883 f38db490-d61c-443f-a65b-d21fe96a405b
is no garbage attempted to be used. Also, do not set args to unknown value again if there are
no options passed in.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@146875 f38db490-d61c-443f-a65b-d21fe96a405b
to fix blind transfers with my last commit here, I also
caused an unwanted side-effect. That is, only the first
priority of the 'h' extension would be executed when
a blind transfer occurred instead of all priorities.
Essentially, my last commit corrected the return value
of ast_bridge_call. However, the implementation still
was not 100% correct. Now it is.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@145606 f38db490-d61c-443f-a65b-d21fe96a405b
within ast_bridge_call was reversed.
This problem was observed when a blind transfer placed from
the callee channel of a test call failed.
While the problem I am solving here is exactly the same
as what was reported in issue #13584, the difference is
that this fix I am applying is trunk-only. Issue #13584
was reported against the 1.4 branch, and my tests
of 1.4's blind transfers appear to work fine.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@145553 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144066 | murf | 2008-09-23 10:41:49 -0600 (Tue, 23 Sep 2008) | 29 lines
(closes issue #13489)
Reported by: DougUDI
Tested by: murf
(closes issue #13490)
Reported by: seanbright
Tested by: murf
(closes issue #13467)
Reported by: edantie
Tested by: murf, edantie, DougUDI
This crash happens because we are unsafely handling old pointers.
The channel whose cdr is being handled, has been hung up and
destroyed already. I reorganized the code a bit, and tried not
to lose the fork-cdr-chain concepts of the previous code.
I now verify that the 'previous' channel (the channel we
had when the bridge was started), still exists, by looking it up
by name in the channel list. I also do not try to reset the
CDR's of channels involved in bridges.
Testing shows it solves the crash problem, and should not
negatively impact previous fixes involving CDR's generated
during/after blind transfers. (The reason we need to reset
the CDR's on the "beginning" channels in the first place).
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@144067 f38db490-d61c-443f-a65b-d21fe96a405b
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142992 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142676 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142576 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142474 | murf | 2008-09-10 15:58:17 -0600 (Wed, 10 Sep 2008) | 30 lines
(closes issue #12318)
Reported by: krtorio
I made a small change to the code that handles local channel situations.
In that code, I copy the answer time from the peer cdr, to the bridge_cdr,
but I wasn't also copying the disposition from the peer cdr.
So, Now I copy the disposition, and I've tested against
these cases:
1. phone 1 never answers the phone; no cdr is generated at all.
this should show up as a manager command failure or something.
2. phone 2 never answers. CDR is generated, says NO ANSWER
3. phone 2 is busy. CDR is generated, says BUSY
4. phone 2 answers: CDR is generated, times are correct; disposition
is ANSWERED, which is correct. The start time is the time that
the manager dialed the first phone. The answer time is the time
the second phone picks up.
I purposely left the cid and src fields blank; since this call really
originates from the manager, there is no 'easy' data to put in these
fields. If you feel strongly that these fields should be filled in,
re-open this bug and I'll dig further.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142475 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142063 | russell | 2008-09-09 10:40:24 -0500 (Tue, 09 Sep 2008) | 5 lines
Ensure that the stored CDR reference is still valid after the bridge before
poking at it. Also, keep the channel locked while messing with this CDR.
(fixes crashes reported in issue #13409)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142064 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@141039 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@140489 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139764 | murf | 2008-08-25 09:33:14 -0600 (Mon, 25 Aug 2008) | 9 lines
This patch reverts the changes made via 139347, and 139635, as users
are seeing adverse difference.
I will un-close 13251.
Back to the drawing board/ concept/ beginning/ whatever!
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139770 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139635 | murf | 2008-08-22 16:24:02 -0600 (Fri, 22 Aug 2008) | 6 lines
I found some problems with the code I committed earlier, when
I merged them into trunk, so I'm coming back to clean up.
And, in the process, I found an error in the code I added
to trunk and 1.6.x, that I'll fix using this patch also.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139662 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139627 f38db490-d61c-443f-a65b-d21fe96a405b
of the name/value pairs, pointed out by snuffy-home on #asterisk-commits.
For those of you who rely on the position of name/value pairs in manager
events... stop... that is why associative arrays were invented.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138482 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135821 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: falves11
Tested by: murf
falves11 ==
The changes I introduce here seem to clear up the problem
for me. However, if they do not for you, please reopen this
bug, and we'll keep digging.
The root of this problem seems to be a subtle memory corruption
introduced when creating an extension with an empty extension
name. While valgrind cannot detect it outside of DEBUG_MALLOC
mode, when compiled with DEBUG_MALLOC, this is certain death.
The code in main/features.c is a puzzle to me. On the initial
module load, the code is attempting to add the parking extension
before the features.conf file has even been opened!
I just wrapped the offending call with an if() that will not
try to add the extension if the extension name is empty. THis
seems to solve the corruption, and let the "memory show allocations"
work as one would expect.
But, really, adding an extension with an empty name is a seriously
bad thing to allow, as it will mess up all the pattern matching
algorithms, etc. So, I added a statement to the add_extension2 code to return
a -1 if this is attempted.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135265 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134883 | murf | 2008-07-31 13:23:42 -0600 (Thu, 31 Jul 2008) | 51 lines
(closes issue #11849)
Reported by: greyvoip
Tested by: murf
OK, a few days of debugging, a bunch of instrumentation
in chan_sip, main/channel.c, main/pbx.c, etc. and 5 solid
notebook pages of notes later, I have made the small
tweek necc. to get the start time right on the second
CDR when:
A Calls B
B answ.
A hits Xfer button on sip phone,
A dials C and hits the OK button,
A hangs up
C answers ringing phone
B and C converse
B and/or C hangs up
But does not harm the scenario where:
A Calls B
B answ.
B hits xfer button on sip phone,
B dials C and hits the OK button,
B hangs up
C answers ringing phone
A and C converse
A and/or C hangs up
The difference in start times on the second CDR is because
of a Masquerade on the B channel when the xfer number is
sent. It ends up replacing the CDR on the B channel with
a duplicate, which ends up getting tossed out. We keep
a pointer to the first CDR, and update *that* after the
bridge closes. But, only if the CDR has changed.
I hope this change is specific enough not to muck
up any current CDR-based apps. In my defence, I
assert that the previous information was wrong,
and this change fixes it, and possibly other
similar scenarios.
I wonder if I should be doing the same thing
for the channel, as I did for the peer, but
I can't think of a scenario this might affect.
I leave it, then, as an exersize for the users,
to find the scenario where the chan's CDR
changes and loses the proper start time.
........
and as to 1.4 to trunk; have I expressed my
feelings about code shifting from one file
to another? Good.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134922 f38db490-d61c-443f-a65b-d21fe96a405b
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134401 f38db490-d61c-443f-a65b-d21fe96a405b
jpeeler