........
r139521 | mmichelson | 2008-08-22 14:23:02 -0500 (Fri, 22 Aug 2008) | 8 lines
Remove show_frame_stats_deprecated since it is not
used anywhere and causes build errors if building under
dev-mode with TRACE_FRAMES selected in menuselect.
(closes issue #13362)
Reported by: snuffy
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139525 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139213 | russell | 2008-08-20 17:14:35 -0500 (Wed, 20 Aug 2008) | 11 lines
Fix a crash in the ChanSpy application. The issue here is that if you call
ChanSpy and specify a spy group, and sit in the application long enough looping
through the channel list, you will eventually run out of stack space and the
application with exit with a seg fault. The backtrace was always inside of
a harmless snprintf() call, so it was tricky to track down. However, it turned
out that the call to snprintf() was just the biggest stack consumer in this
code path, so it would always be the first one to hit the boundary.
(closes issue #13338)
Reported by: ruddy
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139215 f38db490-d61c-443f-a65b-d21fe96a405b
........
r139145 | kpfleming | 2008-08-20 14:35:59 -0500 (Wed, 20 Aug 2008) | 8 lines
Backport support for Zaptel/DAHDI channel-level alarms from trunk/1.6, because not doing so just makes it difficult for people with channels that are in alarm when Asterisk starts up to get them going once the alarm is cleared
(closes issue #12160)
Reported by: tzafrir
Patches:
asterisk-chanalarms_14.patch uploaded by tzafrir (license 46)
Tested by: tzafrir
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139146 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139074 | murf | 2008-08-20 11:14:55 -0600 (Wed, 20 Aug 2008) | 12 lines
(closes issue #13263)
Reported by: brainy
Tested by: murf
The specialized reset routine is tromping on the
flags field of the CDR. I made a change to not
reset the DISABLED bit. This should get rid of this
problem.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@139083 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138942 | mmichelson | 2008-08-19 18:17:17 -0500 (Tue, 19 Aug 2008) | 11 lines
Reset agent_pvt variables back to the values in agents.conf
(from what the corresponding channel variables were set to)
when the agent logs out.
(closes issue #13098)
Reported by: davidw
Patches:
20080731__issue13098_agent_ackcall_not_reset.diff uploaded by bbryant (license 36)
Tested by: davidw
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138943 f38db490-d61c-443f-a65b-d21fe96a405b
........
r138938 | jpeeler | 2008-08-19 17:56:07 -0500 (Tue, 19 Aug 2008) | 7 lines
Add configuration option to chan_dahdi.conf to allow buffering policy and number of buffers to be configured per channel. Syntax:
buffers=<num of buffers>,<policy>
Where the number of buffers is some non-negative integer and the policy is either "full", "half", or "immediate".
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138939 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138886 | mmichelson | 2008-08-19 13:50:53 -0500 (Tue, 19 Aug 2008) | 23 lines
Add a lock and unlock prior to the destruction of the chanspy_ds
lock to ensure that no other threads still have it locked. While
this should not happen under normal circumstances, it appears that
if the spyer and spyee hang up at nearly the same time, the following
may occur.
1. ast_channel_free is called on the spyee's channel.
2. The chanspy datastore is removed from the spyee's channel in
ast_channel_free.
3. In the spyer's thread, the spyer attempts to remove and destroy the datastore
from the spyee channel, but the datastore has already been removed in step 2,
so the spyer continues in the code.
4. The spyee's thread continues and calls the datastore's destroy callback,
chanspy_ds_destroy. This involves locking the chanspy_ds.
5. Now the spyer attempts to destroy the chanspy_ds lock. The problem is that in step 4,
the spyee has locked this lock, meaning that the spyer is attempting to destroy a lock
which is currently locked by another thread.
The backtrace provided in issue #12969 supports the idea that this is possible
(and has even occurred). This commit does not close the issue, but should help
in preventing one type of crash associated with the use of app_chanspy.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138887 f38db490-d61c-443f-a65b-d21fe96a405b
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138815 f38db490-d61c-443f-a65b-d21fe96a405b
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/tex/misdn.tex
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138738 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138685 | mmichelson | 2008-08-18 15:01:14 -0500 (Mon, 18 Aug 2008) | 10 lines
Change the inequalities used in app_queue with regards
to timeouts from being strict to non-strict for more
accuracy.
(closes issue #13239)
Reported by: atis
Patches:
app_queue_timeouts_v2.patch uploaded by atis (license 242)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138687 f38db490-d61c-443f-a65b-d21fe96a405b
of the name/value pairs, pointed out by snuffy-home on #asterisk-commits.
For those of you who rely on the position of name/value pairs in manager
events... stop... that is why associative arrays were invented.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138482 f38db490-d61c-443f-a65b-d21fe96a405b
the port configuration option from cdr_tds.conf. So go ahead and
remove it from the sample config.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138442 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138119 | jpeeler | 2008-08-15 14:21:51 -0500 (Fri, 15 Aug 2008) | 4 lines
Fixes the dahdi restart functionality. Dahdi restart allows one to restart all DAHDI channels, even if they are currently in use. This is different from unloading and then loading the module since unloading requires the use count to be zero. Reloading the module is different in that the signalling is not changed from what it was originally configured. Also, this fixes not closing all the file descriptors for D-channels upon module unload (which would prevent loading the module afterwards).
(closes issue #11017)
........
r138151 | jpeeler | 2008-08-15 14:41:29 -0500 (Fri, 15 Aug 2008) | 1 line
declared static mutexes using AST_MUTEX_DEFINE_STATIC macro
........
r138238 | jpeeler | 2008-08-15 16:28:26 -0500 (Fri, 15 Aug 2008) | 1 line
initialize condition variable ss_thread_complete using ast_cond_init
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138311 f38db490-d61c-443f-a65b-d21fe96a405b
