*must* write the file to the FILE *, and not the raw fd. Otherwise, it breaks
TLS support.
Thanks to rizzo for catching this!
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72738 f38db490-d61c-443f-a65b-d21fe96a405b
Handle transferring large files from the built-in http server. Previously, the
code attempted to malloc a block as large as the file itself. Now it uses the
sendfile() system call so that the file isn't copied into userspace at all if
it is available. Otherwise, it just uses a read/write of small chunks at a time.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72701 f38db490-d61c-443f-a65b-d21fe96a405b
This checks for it in configure, and only uses it if it's available.
If it's wrong, somebody please yell at me and tell me why.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72539 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r69702 | russell | 2007-06-18 11:35:02 -0500 (Mon, 18 Jun 2007) | 6 lines
To prevent 92138749238754 more reports of "I have unixodbc installed, but
still can't build *_odbc.so!", check for ltdl directly, instead of just listing
it as another library to include in the unixodbc check in the configure script.
This also makes ltdl show up as a dependency in menuselect so people know what
to go install. (related to issue #9989, patch by me)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@69703 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67026 | russell | 2007-06-04 11:02:31 -0500 (Mon, 04 Jun 2007) | 6 lines
Change the configure script to build a test program against libcurl to make
sure the results from curl-config can be used to compile successfully. This is
intended to help prevent a situation where you are cross compiling, and the
configure script finds the curl library installed on the host.
(issue #9865, reported and patched by zandbelt)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@67029 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r66157 | kpfleming | 2007-05-25 10:28:46 -0400 (Fri, 25 May 2007) | 3 lines
handle the GNUTLS library properly in the configure script and build system
don't build in OSP support unless we have found and are allowed to use SSL support
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@66158 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r66029 | qwell | 2007-05-24 15:53:18 -0500 (Thu, 24 May 2007) | 2 lines
Following moving strip to AC_PATH_TOOL, we need to do something similar for ar.
........
r66030 | qwell | 2007-05-24 15:54:16 -0500 (Thu, 24 May 2007) | 2 lines
Rebuild configure script for previous ar fix.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@66031 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@60604 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59202 | nadi | 2007-03-26 17:25:53 +0200 (Mo, 26 Mär 2007) | 4 lines
* mISDN >= 1.2 provides a dsp pipeline for i.e. echo cancellation modules, make chan_misdn use it.
* add a check for linux/mISDNdsp.h to configure.ac and update the autogenerated files: 'configure', 'autoconfig.h.in'
(the 'configure' script was not in sync with the latest configure.ac, so the diff is a bit bigger than expected).
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@59203 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@58932 f38db490-d61c-443f-a65b-d21fe96a405b
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a
SQLite3 database. (issue #7149, alerios)
* Add new module, res_config_sqlite, which adds realtime database configuration
support for SQLite version 2. I decided that this was ok since we didn't have
any realtime support for version 3. If someone ports this to version 3, then
version 2 support can be removed or marked deprecated.
(issue #7790, rbarun_proformatique)
* Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom.
Also, note that there were other modules on the bug tracker that did not make
the cut because they provided some duplicated functionality. Those are:
* cdr_sqlite3 (issue #6754, moy)
* cdr_sqlite3 (issue #8694, bsd)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@58866 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58320 | russell | 2007-03-07 19:01:46 -0600 (Wed, 07 Mar 2007) | 6 lines
If we receive ZT_EVENT_REMOVED, destroy the specified channel.
(issue #7256, tzafrir)
Also, update the configure script to make sure that we don't try to build
chan_zap if the installed version of zaptel does not include ZT_EVENT_REMOVED.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@58321 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52997 | russell | 2007-01-30 17:23:24 -0600 (Tue, 30 Jan 2007) | 5 lines
When we are checking for a system installed version of libgsm, we need to check
for gsm.h as well. Furthermore, when checking for this header, it may be
located in a gsm/ sub directory, so check for that, as well.
(issue #8773)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@52998 f38db490-d61c-443f-a65b-d21fe96a405b
do not work on FreeBSD - presumably they depend on some
auto* feature that is not installed by default.
I am not sure on what is a proper fix. In my local copy
i simply comment them out.
The AST_PROG_LD is a long standing isse, there were attempts
to fix it in the past but probably not enough has been copied
to acinclude.m4, and i had forgotten about it because i
commented out this call in configure.ac long ago
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@51288 f38db490-d61c-443f-a65b-d21fe96a405b
(for linux, this is functionally equivalent to the previous
method; for FreeBSD, it re-adds inspection in $PREFIX/zaptel.h).
Please wait to regenerate the "configure" file as i have
another few pending changes to configure.ac
Not applicable to 1.4 until acinclude.m4 is also updated.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@51285 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50867 | kpfleming | 2007-01-15 09:03:06 -0600 (Mon, 15 Jan 2007) | 2 lines
use the ACX_PTHREAD macro from the Autoconf macro archive for setting up compiler pthreads support... should improve portability to platforms with unusual pthreads requirements
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@50869 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49102 | kpfleming | 2007-01-01 17:34:35 -0600 (Mon, 01 Jan 2007) | 2 lines
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@49103 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48190 | russell | 2006-12-01 18:16:28 -0500 (Fri, 01 Dec 2006) | 12 lines
FreeBSD 6.1 does not include wget by default. However, it has fetch which will
work just fine for our purposes of downloading the sounds packages. So, check
for both wget and fetch and the configure script and use what was found to
download them. If neither one was found, and sound packages are selected that
must be downloaded, the install process will print out an informative error
message indicating the situation.
Also, fix a couple places where "make" was hard coded into some output messages
by replacing them with the $(MAKE) variable.
(issue #8451, initial patch by pabelanger, with additional modifications by me)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@48191 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r47327 | russell | 2006-11-08 11:31:59 -0500 (Wed, 08 Nov 2006) | 4 lines
Copy the macros from libtool.m4 to our own acinclude.m4 such that libtool is
no longer required to be installed to be able to generate the configure
script.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@47328 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r46845 | russell | 2006-11-01 17:32:12 -0500 (Wed, 01 Nov 2006) | 5 lines
Add a check in the configure script to determine whether ld is GNU ld or not.
This is needed because module embedding only works for gnu ld. GNU ld is now
listed as a dependency for all of the module embedding options in menuselect.
(issue #8143)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@46846 f38db490-d61c-443f-a65b-d21fe96a405b
and support linux as well (using fopencookie(), which should
be available in glibc).
Update configure.ac to check for funopen (BSD) and fopencookie(glibc),
and while we are at it also for gethostbyname_r
(the generated files need to be updated, or you need
to run bootstrap.sh yourself).
Document the new options in http.conf.sample
(names are only tentative, better ones are welcome).
At this point we can safely enable the option.
Anyone willing to try this on Sun and Apple platforms ?
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@45892 f38db490-d61c-443f-a65b-d21fe96a405b
mechanism more flexible, but otherwise should not affect your build
even if you regenerate the "configure" script.
(Most likely you need to run bootstrap.sh as you really need to re-run
autoheader for reasons that i do not completely understand).
If you don't regenerate "configure", of course you will see no difference.
In detail:
- restructure the check for mandatory modules to remove some
redundant code blocks;
- extend the AST_EXT_LIB_CHECK so that it can used also for
checking headers;
- define the AST_C_DEFINE_CHECK macro to test for #defined symbols;
- for the two above macros, add a last argument that getscopied into
HAVE_$1_VERSION so the source can adapt to different versions of the
same libraries/header/etc
- document the above;
- document a problem that existed before and i did not manage to solve:
the 'description' argument to AC_DEFINE does not substiture shell variables
so you will not see the actual values in the comments (in autoconfig.h)..
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@44467 f38db490-d61c-443f-a65b-d21fe96a405b
until a better solution is found.
Please do not commit the regenerated "configure" file yet,
as there are some more simplifications to be applied to
configure.ac and acinclude.m4 in the next few days.
For the same reason, i am postponing the commit to the 1.4 branch
until the above changes are complete.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@44411 f38db490-d61c-443f-a65b-d21fe96a405b
use 2.60 in case the generated "configure" file must me committed back to the
repository, so we keep differences to a minimum.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@44251 f38db490-d61c-443f-a65b-d21fe96a405b
when LOADABLE_MODULES is off, don't export symbols from the main binary
when LOADABLE_MODULES is off, and the compiler/linker support it, strip out code not used in the final binary
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@41166 f38db490-d61c-443f-a65b-d21fe96a405b
causes our build system to blow up.
If anyone still sees problems and configure didn't detect a problem with make,
please let me know.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@41119 f38db490-d61c-443f-a65b-d21fe96a405b
also, keep trying to dlclose() a module until it actually goes away, since it may have other modules it brought in when it was loaded (thanks PCadach for pointing this problem out to me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@40949 f38db490-d61c-443f-a65b-d21fe96a405b
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@40722 f38db490-d61c-443f-a65b-d21fe96a405b
support the new location for zaptel.h and tonezone.h
use the dependency information output by menuselect to build Makefile rules for each module for header files and libraries
combine the common rules into a top-level Makefile.rules file
remove all (now) unnecessary stuff from subdir Makefiles
change translator API so that the newpvt() callback returns an int instead of a pointer (it no longer allocates memory)
alphabetize --with-<foo> options in configure script
enhance Net-SNMP support in configure script to provide a --with-netsnmp option
fix support for --with-pq so that if pg-config is not found when --with-pq is specified, an error will be generated
add 'optional package' usage to modules now that menuselect can output it
allow res_snmp to build by default, since the new loader changes coming soon will solve the function naming problem (and users can disable it via menuselect anyway)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35832 f38db490-d61c-443f-a65b-d21fe96a405b
that is expanded inline, so it didn't do what I wanted it to. The --help output
will be wrong again, but that's better than completely breaking it. :)
(Thanks to jcollie for catching this!)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35439 f38db490-d61c-443f-a65b-d21fe96a405b
the variable directly, so that the configure --help information shows the
correct default prefix
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35391 f38db490-d61c-443f-a65b-d21fe96a405b
- with contributions from miconda, jcollie, and sb
- branch maintained by oej
Thanks everyone!
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@29094 f38db490-d61c-443f-a65b-d21fe96a405b
options to configure such as --libdir, --sbindir, etc. All of the default paths
are still the same. (issue #7057, jcollie)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@28747 f38db490-d61c-443f-a65b-d21fe96a405b
instead of being added to the compiler commands. This header file will be
installed and modules built outside of the main tree will be able to use the
same build options used to build the rest of Asterisk.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@26808 f38db490-d61c-443f-a65b-d21fe96a405b
zaptel.h otherwise
If you did ./configure --with-tonezone=/usr/local/ on FreeBSD, it would run
the first macro which would not find it, but it wouldn't make it to the second
macro because the first check saw that --with-tonezone was specified and would
exit with error
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@25989 f38db490-d61c-443f-a65b-d21fe96a405b
ncurses is statically compiled with term info support, which is provided in
the statically compiled editline library that we are including.
(issue #6948, original patch by casper, modified to use the features
of AST_EXT_LIB)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@25611 f38db490-d61c-443f-a65b-d21fe96a405b
russell