https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315644 | twilson | 2011-04-26 14:39:01 -0700 (Tue, 26 Apr 2011) | 32 lines
Merged revisions 315643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315643 | twilson | 2011-04-26 14:27:44 -0700 (Tue, 26 Apr 2011) | 25 lines
Merged revisions 315596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315596 | twilson | 2011-04-26 14:16:10 -0700 (Tue, 26 Apr 2011) | 18 lines
Allow transfer loops without allowing forwarding loops
We try to avoid the situation where two phones may be forwarded to each other
causing an infinite loop by storing each dialed interface in a channel
datastore and checking the list before dialing out. This works, but currently
breaks situations like A calls B, A transfers B to C, B transfers C to A, and A
transfers C to B. Since human interaction is happening here and not an
automated forwarding loop, it should be allowed.
This patch removes the dialed_interfaces datastore when a call is bridged (a
suggestion from the brilliant mmichelson). If a call is being bridged, it
should be safe to assume that we aren't stuck in a loop.
Since we are now handling this is the bridge code, the previous attempts at
handling it in app_dial and app_queue are removed.
Review: https://reviewboard.asterisk.org/r/1195/
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@315670 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r315645 | rmudgett | 2011-04-26 17:14:31 -0500 (Tue, 26 Apr 2011) | 21 lines
The 'e' special extension fails to trigger in at least two cases.
The 'e' extension is a fall back for the 'i', 't', or 'T' extensions if
any of them do not exist. Many of the places the 'e' extension was
supposed to be invoked fail because the priority was set wrong. There
were two places where the 'e' extension was not even checked for fall
back.
* Made invoke the 'e' extension similarly to the previous 'i', 't', or 'T'
extension check and added the 'e' extension as a fall back to the two
missing locations.
* Prioritized and optimized some hangup tests associated with the 'e'
extension.
(closes issue #19136)
Reported by: kshumard
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1196/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@315649 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315503 | tilghman | 2011-04-26 14:32:50 -0500 (Tue, 26 Apr 2011) | 28 lines
Merged revisions 315502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315502 | tilghman | 2011-04-26 14:22:52 -0500 (Tue, 26 Apr 2011) | 21 lines
Merged revisions 315501 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315501 | tilghman | 2011-04-26 14:18:46 -0500 (Tue, 26 Apr 2011) | 14 lines
Fix the bounds-checking code.
The code that set the bit within the select bitfield was correct, but the
bounds-checking code was not. The change to that line uses the new _bitsize
macro for clarity. Also, FD_ZERO macro did not zero-out anything but the
first word of the bitfield, so this could have caused problems with modules
using that macro with the expanded bitfield.
(closes issue #18773)
Reported by: jamicque
Patches:
20110423__issue18773.diff.txt uploaded by tilghman (license 14)
Tested by: chris-mac
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@315504 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r315446 | russell | 2011-04-26 12:40:23 -0500 (Tue, 26 Apr 2011) | 14 lines
chan_local: resolve a deadlock.
This patch resolves a fairly complex deadlock that can occur with the
combination of chan_local and a dialplan switch, such as dynamic realtime
extensions, which pulls autoservice into the picture when doing a dialplan
lookup.
(closes issue #18818)
Reported by: nic
Patches:
issue18818.patch uploaded by jthurman (license 614)
18818.v1.txt uploaded by russell (license 2)
Tested by: nic, jthurman, kterzi, steve-howes, sysreq, IshMalik
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@315447 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314780 | russell | 2011-04-22 09:02:23 -0500 (Fri, 22 Apr 2011) | 18 lines
Merged revisions 314778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314778 | russell | 2011-04-22 08:58:03 -0500 (Fri, 22 Apr 2011) | 11 lines
Initialize buffers in getvar and getvarfull.
Initialize the buffers used to hold the result from GET VARIABLE or
GET VARIABLE FULL. The bug report shows func_read returning garbage in
the result. It assumed that the buffer passed in was initialized, like many
other functions do. In the more common code path (through the dialplan), it
is initialized, so just initialize it here too.
(closes issue #19050)
Reported by: johnz
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314781 f38db490-d61c-443f-a65b-d21fe96a405b
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314735 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314666 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314550 | twilson | 2011-04-20 17:23:04 -0700 (Wed, 20 Apr 2011) | 13 lines
Merged revisions 314549 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314549 | twilson | 2011-04-20 17:17:34 -0700 (Wed, 20 Apr 2011) | 6 lines
Don't allocate more space than necessary for a sip_pkt
This extra allocation is a hold-over from when pkt->data was a
character array. Now that it is an allocated string, just allocate
enough for the sip_pkt.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314551 f38db490-d61c-443f-a65b-d21fe96a405b
Previously, the DAHDI format bit fields matched up with the Asterisk
bitfields. Since the Asterisk codec bit fields were replaced in r306010,
codec_dahdi needs to contain the formats itself. In the future, the DAHDI
formats should either change to something other than bitfields, or the
bitfields need to move from include/dahdi/kernel.h to
include/dahdi/user.h.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314471 f38db490-d61c-443f-a65b-d21fe96a405b
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314116 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314069 | rmudgett | 2011-04-18 11:10:10 -0500 (Mon, 18 Apr 2011) | 22 lines
The AsyncAGI command loop is lax in the value it returns for the return status.
* Return correct status: SUCCESS/FAILED/HANGUP. Previously, abnormal
exits from the command loop such as hangup would return SUCCESS.
* The "asyncagi break" command now returns SUCCESS and is now the only way
to break the command loop with that status. Previously, it returned
FAILED.
* The AMI event AsyncAGI End is no longer sent if the AsyncAGI Start event
is not sent. Previously, this happened because of an error setting up the
AGI pipes.
* All executed AGI commands now get an AsyncAGI Exec result event.
Previously, if the command returned failure (because of hangup), the
command loop just exited with FAILURE and did not send the AsyncAGI Exec
result event.
* Makes sure that the channel frame queue is empty on hangup.
Review: https://reviewboard.asterisk.org/r/1183/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314080 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314067 | dvossel | 2011-04-18 10:23:45 -0500 (Mon, 18 Apr 2011) | 22 lines
Remove the need for deadlock avoidance in chan_sip do_monitor.
Deadlock avoidance between the sip pvt and the pvt->owner is
very difficult. Now that channel's are ao2 objects, this complication
is no longer necessary. It turns out the pvt's msg queue only
exists because of deadlock avoidance (when deadlock avoidance fails
msgs were added to a queue to be processed later), so this goes away as well.
The technique used in the new sip_lock_pvt_full() function should
be used as a template for replacing all locations where deadlock
avoidance occurs between a channel tech_pvt and the pvt's owner.
My hope is that this will begin a reversal of the invalid channel
driver locking architecture we have been using for so long.
This patch also resolves an issue where the pvt->owner gets
unlocked during processing the msg queue.
(closes issue #18690)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/1182/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314078 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314018 f38db490-d61c-443f-a65b-d21fe96a405b
This fixes a regression in the media architecture change
where video frames did not have their video mark set
correctly. dvossel wrote this. twilson kindly committed
this, mmichelson found the bug.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313822 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313780 | rmudgett | 2011-04-14 15:59:56 -0500 (Thu, 14 Apr 2011) | 20 lines
Leftover debug messages unconditionally sent to the console.
Executing Dial(DAHDI/1/18475551212,300,) with the echotraining config
option enabled outputs the following debug messages unconditionally:
Dialing T1847555121 on 1
Dialing www2w on 1
* Made debug messages in my_dial_digits() normal debug messages that do
not get output unless enabled.
* Reworded some debug messages in my_dial_digits() to be clearer.
* Replace strncpy() with ast_copy_string() in my_dial_digits() which does
the same job better.
(closes issue #18847)
Reported by: vmikhelson
Tested by: rmudgett
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313781 f38db490-d61c-443f-a65b-d21fe96a405b
Add Asterisk Device State information and callbacks to the Call Completion
Supplemental Services for generic agents.
There are currently not many devices that have native support for CCSS.
Even as the devices become available there may be other reasons why one
may choose to not take advantage of the native abilities and stick with
the generic implementation. The generic implementation is quite capable
and could be greatly enhanced by adding device state capabilities. A
phone could then subscribe to the device state with a BLF key in
conjunction with Asterisk hints.
The advantages of the device state information would allow a single button
to: request CCSS, cancel a CCSS request, and display the current state of
a CCSS request.
For example, you may have a single button that when not lit, there is no
active CCSS request. When you press that button, the dialplan can query
the DEVICE_STATE() associated with that caller to determine whether they
should be calling CallCompletionRequest() or CallCompletionCancel(). If
there is currently a pending request, then the dialplan would cancel it.
This also has the advantage of showing the true state of a request, which
is an asynchronous call, even when CallCompletionRequest() thinks it was
successful. The actual request could ultimately fail. Once lit, further
feedback can be provided to the caller about the current state of their
request since it will be updated by the CCSS State Machine as appropriate.
The DEVICE_STATE mapping is configurable since the BLF being used on a
given phone type may vary. The idea is to allow some level of
customization as to the phone's behavior.
As an example, you may want the BLF key to go solid once you have
requested a callback. You may then want the LED to blink (typically
ringing) when either the callback is in process, which is a visual
indication that the incoming call is the desired callback. You may want
it to blink when the callee is ready but you are busy, giving you a visual
indication that the target is available as you may want to get off the
line so that the callback can be successful.
Device state information is sent back via the ast_devstate_prov_add()
callback for any generic CCSS device as it traverses through the state
machine. You simply provide a map between CC_STATE values and the
corresponding AST_DEVICE state values.
You could then generate hints against these states similar to what is
possible today with Custom Devstates or MeetMe states. For example, you
may have an extension 3000 that is currently associated with device
SIP/3000. You could then create a feature code for that extension that
may look something like:
exten => *823000,hint,ccss:sip/3000
You would then subscribe a BLF button to *823000 which would point to the
dialplan that handled CCSS requests/cancels using the available
DEVICE_STATE() information about ccss:sip/3000 to make the decision about
what to do.
(closes issue #18788)
Reported by: p_lindheimer
Patches:
ccss.trunk.18788.patch uploaded by p lindheimer (license 558)
Modified with final reviewboard comments.
Tested by: p_lindheimer, loloski
Review: https://reviewboard.asterisk.org/r/1105/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313744 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313700 | rmudgett | 2011-04-13 17:52:47 -0500 (Wed, 13 Apr 2011) | 5 lines
Revert flushing stale AsyncAGI commands from -r313615.
It looks like it was intentional to leave any commands or in-flight
commands in the queue in case Async AGI is run again on the call.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313701 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313588 | rmudgett | 2011-04-13 11:31:50 -0500 (Wed, 13 Apr 2011) | 55 lines
Merged revisions 313579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313579 | rmudgett | 2011-04-13 11:29:49 -0500 (Wed, 13 Apr 2011) | 48 lines
Merged revisions 313545 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313545 | rmudgett | 2011-04-13 11:21:24 -0500 (Wed, 13 Apr 2011) | 41 lines
Asterisk does not hangup a channel after endpoint hangs up.
If the call that the dialplan started an AGI script for is hungup while
the AGI script is in the middle of a command then the AGI script is not
notified of the hangup. There are many AGI Exec commands that this can
happen with. The reported applications have been: Background, Wait, Read,
and Dial. Also the AGI Get Data command.
* Don't wait on the Asterisk channel after it has hung up. The channel is
likely to never need servicing again.
* Restored the AGI script's ability to return the AGI_RESULT_HANGUP value
in run_agi(). It previously only could return AGI_RESULT_SUCCESS or
AGI_RESULT_FAILURE after the DeadAGI and AGI applications were merged.
(closes issue #17954)
Reported by: mn3250
Patches:
issue17954_v1.8.patch uploaded by rmudgett (license 664)
issue17954_v1.6.2.patch uploaded by rmudgett (license 664)
issue17954_v1.4.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA SWP-2171
(closes issue #18492)
Reported by: devmod
Tested by: rmudgett
JIRA SWP-2761
(closes issue #18935)
Reported by: nvitaly
Tested by: astmiv, rmudgett
JIRA SWP-3216
(closes issue #17393)
Reported by: siby
Tested by: rmudgett
JIRA SWP-2727
Review: https://reviewboard.asterisk.org/r/1165/
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313606 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313517 | rmudgett | 2011-04-12 17:35:53 -0500 (Tue, 12 Apr 2011) | 12 lines
Bring the dumpchan application inline with "core show channel".
* Added fields that are in "core show channel" to dumpchan output.
* Fixed reuse of formatbuf before the previous string stored there was
used by snprintf. All output strings now have their own buffer.
* Adjusted the buffer sizes to not be so abusive of the stack now that
there are more buffers.
Change requested by oej.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313527 f38db490-d61c-443f-a65b-d21fe96a405b
IPv6 support for ooh323,
bindaddr, peers and users ip can be IPv4 or IPv6 addr
correction for multi-homed mode (0.0.0.0 or :: bindaddr)
can work in dual 6/4 mode with :: bindaddr
gatekeeper mode isn't supported in v6 mode while
(issue #18278)
Reported by: may213
Patches:
ipv6-ooh323.patch uploaded by may213 (license 454)
Review: https://reviewboard.asterisk.org/r/1004/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313482 f38db490-d61c-443f-a65b-d21fe96a405b
twilson