This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90949 f38db490-d61c-443f-a65b-d21fe96a405b
may be specified since this was not documented previously
(closes issue #11432, reported and patched by Laureano)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90528 f38db490-d61c-443f-a65b-d21fe96a405b
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90388 f38db490-d61c-443f-a65b-d21fe96a405b
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89946 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89623 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89559 | tilghman | 2007-11-25 11:17:10 -0600 (Sun, 25 Nov 2007) | 14 lines
We previously attempted to use the ESCAPE clause to set the escape delimiter to
a backslash. Unfortunately, this does not universally work on all databases,
since on databases which natively use the backslash as a delimiter, the
backslash itself needs to be delimited, but on other databases that have no
delimiter, backslashing the backslash causes an error.
So the only solution that I can come up with is to create an option in res_odbc
that explicitly specifies whether or not backslash is a native delimiter. If
it is, we use it natively; if not, we use the ESCAPE clause to make it one.
Reported by: elguero
Patch by: tilghman
(Closes issue #11364)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89561 f38db490-d61c-443f-a65b-d21fe96a405b
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89554 f38db490-d61c-443f-a65b-d21fe96a405b
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89278 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89173 | crichter | 2007-11-12 12:26:48 +0100 (Mo, 12 Nov 2007) | 1 line
if we're NT and no number was dialed and overlapdial is set, we wait for the ISDN timeout instead of starting our own timer. added a comment for the misdn.conf.sample for the overlapdial config option.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89179 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89174 f38db490-d61c-443f-a65b-d21fe96a405b
It was mistakenly deleted in 1.4 without ever being merged to trunk.
Reported by eliel on #asterisk-dev.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89132 f38db490-d61c-443f-a65b-d21fe96a405b
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@88368 f38db490-d61c-443f-a65b-d21fe96a405b
phones to be rung in a specific order.
(closes issue #7279, reported and initially patched by diLLec, patch reworked by me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@87154 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: ruffle
Patches:
app_voicemail.c.diff uploaded by ruffle (license 201)
10739-moveheard.diff uploaded by qwell (license 4)
Tested by: callguy, ruffle
Add an option to disable the automatic moving of "heard" messages to the Old folder.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@82871 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: snar
Patches:
app-queue-cdr-trunk.patch uploaded by snar (license 245)
queues.conf.patch uploaded by snar (license 245)
Add an updatecdr option to queues.conf, so that if a "member name" is specified,
the cdr record will be updated with that, rather than the channel.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@82800 f38db490-d61c-443f-a65b-d21fe96a405b