res_resample, and mark codec_resample as dependent upon res_resample. This
prevents the linker from optimizing away libresample, and also makes it so the
libresample code isn't linked in to multiple places. (I have another module
in a branch that needs it, too.)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95697 f38db490-d61c-443f-a65b-d21fe96a405b
(and probably other systems as well).
Both need libresample.a to be specified in the linking phase,
and cygwin needs <float.h> as other BSD.
The checks for OS-specific headers should really be moved to some
common header though.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95625 f38db490-d61c-443f-a65b-d21fe96a405b
This commit imports libresample for use in Asterisk. It also adds a new codec
module, codec_resample. This module uses libresample to re-sample signed linear
audio between 8 kHz and 16 kHz.
It also provides an alternative for converting between 16 kHz G.722 and 8 kHz
signed linear when using G.722, which will likely be useful as some people have
complained about volume issues when the current codec_g722 converts to 8 kHz
signed linear. But, to test this, you will have to disable the g722-to-slin and
g722-to-slin16 translators in codec_g722.c.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95501 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93180 | kpfleming | 2007-12-16 22:44:51 -0800 (Sun, 16 Dec 2007) | 23 lines
In http://lists.digium.com/pipermail/asterisk-dev/2007-December/031145.html,
rizzo brought up some issues related to the way that the metadata required
for menuselect and the rest of the build system is extracted from the source
files. Since I had a few hours to kill on an airplane today, I decided to
improve this situation... so now the system caches the extracted metadata
and uses it to build the menuselect 'tree' as much as it can. The result
of this is that when a single source file is changed, only the metadata for
that file needs to be extracted again, and the rest is used from the cache
files. I also reduced the number of forked processes required to do the
metadata extraction; it was actually possible to do most of what we needed
in the Makefiles themselves without using any shell scripts at all! On my
laptop, these changes resulted in an 80% decrease in the time required
for the 'menuselect.makeopts' automatic check to occur after editing a single
source file.
While doing this work I also cleaned up a few minor things in the Makefiles,
adding a check for 'awk' to the configure script and changed all remaining
places we use 'grep' or 'awk' to use the ones found by the configure script,
and changed the 'prep_tarball' script to build the menuselect metadata so
that tarballs of Asterisk will include it and won't require the user to
wait while it is extracted after unpacking.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93184 f38db490-d61c-443f-a65b-d21fe96a405b
generate loadable and embedded module lists.
Individual Makefiles now are a lot simpler, possibly as simple as this:
-include $(ASTTOPDIR)/menuselect.makeopts $(ASTTOPDIR)/menuselect.makedeps
MODULE_PREFIX=cdr_
all: _all
include $(ASTTOPDIR)/Makefile.moddir_rules
and also more flexible because in a single directory we can combine
various types of modules (app_, cdr_, func_, ... ) by simply
listing them in the MODULE_PREFIX variable.
The individual Makefiles can also create list of modules to be
excluded by listing them in the variablel MODULE_EXCLUDE (see an
example in channels/Makefile).
With this change it becomes trivial to integrate a directory with
locally created/modified sources into the main build.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@92082 f38db490-d61c-443f-a65b-d21fe96a405b
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89333 f38db490-d61c-443f-a65b-d21fe96a405b
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89106 f38db490-d61c-443f-a65b-d21fe96a405b
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89071 f38db490-d61c-443f-a65b-d21fe96a405b
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@86534 f38db490-d61c-443f-a65b-d21fe96a405b
external libraries and URLs to these. Please help me add these
references.
We might want to create a similar macro "\linuxpackage" to list
the needed Linux packages in popular distributions.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@56647 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52997 | russell | 2007-01-30 17:23:24 -0600 (Tue, 30 Jan 2007) | 5 lines
When we are checking for a system installed version of libgsm, we need to check
for gsm.h as well. Furthermore, when checking for this header, it may be
located in a gsm/ sub directory, so check for that, as well.
(issue #8773)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@52998 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49457 | kpfleming | 2007-01-04 12:05:47 -0600 (Thu, 04 Jan 2007) | 2 lines
make building of codec_gsm against the system GSM library actually work
........
r49460 | kpfleming | 2007-01-04 12:16:40 -0600 (Thu, 04 Jan 2007) | 2 lines
don't define this type either if LOW_MEMORY is enabled
........
r49461 | kpfleming | 2007-01-04 12:17:01 -0600 (Thu, 04 Jan 2007) | 2 lines
don't do frame header caching in the core if LOW_MEMORY is defined
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@49463 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49102 | kpfleming | 2007-01-01 17:34:35 -0600 (Mon, 01 Jan 2007) | 2 lines
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@49103 f38db490-d61c-443f-a65b-d21fe96a405b
- with AST_DEVMODE, building codecs/lpc10 fails because of lots
of warnings, and the configure step in editline fails as well.
Fix this by removing the -Werror in these steps.
- on FreeBSD (but probably on other platforms as well), the final
link of asterisk fails because AST_LIBS was not exported to the
subdirs Makefiles. Add a proper fix in the top-level Makefile
(a possible alternative way is to add "export AST_LIBS" near
the beginning of the file).
With this fix, i believe that some of the platform-specific
conditionals in main/Makefile are redundant (because they should
be already dealt with in the top level Makefile) but i don't
have a platform to check.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@44081 f38db490-d61c-443f-a65b-d21fe96a405b
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@40722 f38db490-d61c-443f-a65b-d21fe96a405b
astmm support and astmm doesn't get really upset and complain that it is being
asked to free memory that was never allocated
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@38271 f38db490-d61c-443f-a65b-d21fe96a405b
I don't particular like the approach, which basically tries to exclude the file based on
NOT being in a list of arches. This, IMHO, is backwards, it should be a list of AMD arches
instead. "Better to light a candle, than to curse the darkness", is apropo here. But since I don't
have an exhaustive list of what those arches could be, I leave as-is for now.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@38187 f38db490-d61c-443f-a65b-d21fe96a405b
split support for G726-32 into RFC3551 and AAL2 packing orders, since both are in use
change "G726-32" to be RFC3551 packing order, in spite of devices that use AAL2 order with this MIME type
add ability to directly transcode between packing orders
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@37494 f38db490-d61c-443f-a65b-d21fe96a405b
support the new location for zaptel.h and tonezone.h
use the dependency information output by menuselect to build Makefile rules for each module for header files and libraries
combine the common rules into a top-level Makefile.rules file
remove all (now) unnecessary stuff from subdir Makefiles
change translator API so that the newpvt() callback returns an int instead of a pointer (it no longer allocates memory)
alphabetize --with-<foo> options in configure script
enhance Net-SNMP support in configure script to provide a --with-netsnmp option
fix support for --with-pq so that if pg-config is not found when --with-pq is specified, an error will be generated
add 'optional package' usage to modules now that menuselect can output it
allow res_snmp to build by default, since the new loader changes coming soon will solve the function naming problem (and users can disable it via menuselect anyway)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35832 f38db490-d61c-443f-a65b-d21fe96a405b
subdirectory instead of a for loop
- remove the FORCE target from the main Makefile and add the couple places
I used it to the .PHONY target. .PHONY does the same thing and is a built-in
more efficient way of doing it.
- add a bunch more targets to .PHONY ...
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35503 f38db490-d61c-443f-a65b-d21fe96a405b
- use separate targets instead of a for loop for doing 'make depend' for
each sub directory
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35501 f38db490-d61c-443f-a65b-d21fe96a405b
- add a copyright header to the build_tools Makefile
- remove 'depend' from the 'all' target in agi/ and utils/ since it is handled
by the main Makefile already
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35479 f38db490-d61c-443f-a65b-d21fe96a405b
since they are targets that do not have resulting files and are never listed
as prerequisites to real targets. Using .PHONY in this manner improves make
performance by never having to check for resulting files.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@35415 f38db490-d61c-443f-a65b-d21fe96a405b
russell