https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136726 | murf | 2008-08-07 18:15:34 -0600 (Thu, 07 Aug 2008) | 32 lines
(closes issue #13236)
Reported by: korihor
Wow, this one was a challenge!
I regrouped and ran a new strategy for
setting the ~~MACRO~~ value; I set it once
per extension, up near the top. It is only
set if there is a switch in the extension.
So, I had to put in a chunk of code to detect
a switch in the pval tree.
I moved the code to insert the set of ~~exten~~
up to the beginning of the gen_prios routine,
instead of down in the switch code.
I learned that I have to push the detection
of the switches down into the code, so everywhere
I create a new exten in gen_prios, I make sure
to pass onto it the values of the mother_exten
first, and the exten next.
I had to add a couple fields to the exten
struct to accomplish this, in the ael_structs.h
file. The checked field makes it so we don't
repeat the switch search if it's been done.
I also updated the regressions.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@136746 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135851 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135821 f38db490-d61c-443f-a65b-d21fe96a405b
to Asterisk licensing information. The licensing page includes the Asterisk license,
as well as a (not yet complete) list of 3rd party libraries that may be used, as well
as what license we receive them under.
Help filling out this list in the format that I have started in doxyref.h would be
much appreciated. :)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@133575 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133169 | mmichelson | 2008-07-23 14:39:47 -0500 (Wed, 23 Jul 2008) | 12 lines
As suggested by seanbright, the PSEUDO_CHAN_LEN in
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@133171 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132872 | kpfleming | 2008-07-23 06:52:18 -0500 (Wed, 23 Jul 2008) | 2 lines
minor optimization for stringfields: when a field is being set to a larger value than it currently contains and it happens to be the most recent field allocated from the currentl pool, it is possible to 'grow' it without having to waste the space it is currently using (or potentially even allocate a new pool)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@132964 f38db490-d61c-443f-a65b-d21fe96a405b
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@132390 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: murf
Most of this bug was already fixed by Tilghman before
I opened it; Many thanks to Tilghman for his fix
in svn version 125794. That fix cleared up some of the
fields in the lock_info.
This commit changes the address that is stored for the
lock in the lock_info struct, so that it is the same
as that passed into the locking macros. This makes
searching for a lock_info (as in log_show_lock())
by its lock addr possible. The lock_addr field is
infinitely more useful if it is the same as what
is 'publicly' available outside the lock_info code.
Many thanks to kpfleming, putnopvut, and Russell for their
invaluable insights earlier today.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@131570 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130039 | kpfleming | 2008-07-11 10:41:56 -0500 (Fri, 11 Jul 2008) | 4 lines
add support for a configuration parameter for 'inband audio during RELEASE', which is currently mandatory in libpri-1.4.4 but will become configurable in libpri-1.4.5 later today
(related to issue #13042)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130040 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129149 | tilghman | 2008-07-08 15:27:47 -0500 (Tue, 08 Jul 2008) | 8 lines
Cause SIP to return a 480 instead of a 404 when a sip peer exists, but is not
registered.
(closes issue #12885)
Reported by: ibc
Patches:
20080701__bug12885__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: ibc
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@129152 f38db490-d61c-443f-a65b-d21fe96a405b
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128240 f38db490-d61c-443f-a65b-d21fe96a405b
and not use the p2p rtp bridge). I could not find a way to detect us using the p2p bridge, which
would be nice.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128197 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127973 | tilghman | 2008-07-03 22:30:30 -0500 (Thu, 03 Jul 2008) | 8 lines
Fix the 'dialplan remove extension' logic, so that it a) works with cidmatch,
and b) completes contexts correctly when the extension is ambiguous.
(closes issue #12980)
Reported by: licedey
Patches:
20080703__bug12980.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128027 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127793 f38db490-d61c-443f-a65b-d21fe96a405b
to document arguments seems logical, and does work, but is not the best
thing to use.
\arg in doxygen is simply for creating non-nested unordered lists. \param is
the correct tag to use to document function parameters, and will come out
better in the generated documentation.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127401 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r126573 | russell | 2008-06-30 11:05:08 -0500 (Mon, 30 Jun 2008) | 10 lines
Fix a typo in the non-DEBUG_THREADS version of the recently added DEADLOCK_AVOIDANCE()
macro. This caused the lock to not actually be released, and as a result, not
avoid deadlocks at all. This resolves the issues reported in the last while about
Asterisk locking up all over the place (and most commonly, in chan_iax2).
(closes issue #12927)
(closes issue #12940)
(closes issue #12925)
(potentially closes others ...)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@126574 f38db490-d61c-443f-a65b-d21fe96a405b
implementation from using the volatile libtds, to using the db-lib front end.
The unintended side effect of this is that we support (at least) versions 0.62
through 0.82 of the FreeTDS distribution without any #ifdef ugliness.
(closes issue #12844)
Reported by: jcollie
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@126226 f38db490-d61c-443f-a65b-d21fe96a405b
