https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r284597 | tilghman | 2010-09-02 00:00:34 -0500 (Thu, 02 Sep 2010) | 29 lines
Merged revisions 284593,284595 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r284593 | tilghman | 2010-09-01 17:59:50 -0500 (Wed, 01 Sep 2010) | 18 lines
Merged revisions 284478 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r284478 | tilghman | 2010-09-01 13:49:11 -0500 (Wed, 01 Sep 2010) | 11 lines
Ensure that all areas that previously used select(2) now use poll(2), with implementations that need poll(2) implemented with select(2) safe against 1024-bit overflows.
This is a followup to the fix for the pthread timer in 1.6.2 and beyond, fixing
a potential crash bug in all supported releases.
(closes issue #17678)
Reported by: russell
Branch: https://origsvn.digium.com/svn/asterisk/team/tilghman/ast_select
Review: https://reviewboard.asterisk.org/r/824/
........
................
r284595 | tilghman | 2010-09-01 22:57:43 -0500 (Wed, 01 Sep 2010) | 2 lines
Failed to rerun bootstrap.sh after last commit
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@284598 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@284479 f38db490-d61c-443f-a65b-d21fe96a405b
You can't write "same as above" in hypertext documentation. Above doesn't make sense in
hyperspace.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@284217 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283230 | russell | 2010-08-23 08:23:12 -0500 (Mon, 23 Aug 2010) | 7 lines
Make the AST_CEL_AMA enum match up with the AST_CDR_ ama flag values.
Really, having 2 enums for this is silly and error prone, demonstrated by
the crash that I hit because there was an assumption in the code that the
values in each matched up. However, this is a quick fix to get them to
match up so it will work.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@283232 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282098 | rmudgett | 2010-08-12 17:06:06 -0500 (Thu, 12 Aug 2010) | 7 lines
Separate call completion config parameter allocation and default initialization.
If you ever have a need to reset the call completion config parameters
to defaults, now you can.
And no Virginia, C++ idioms do not always work in C.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@282099 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@282048 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279949 | dvossel | 2010-07-27 15:57:00 -0500 (Tue, 27 Jul 2010) | 31 lines
Merged revisions 279946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279946 | dvossel | 2010-07-27 15:54:32 -0500 (Tue, 27 Jul 2010) | 24 lines
Merged revisions 279945 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279945 | dvossel | 2010-07-27 15:33:40 -0500 (Tue, 27 Jul 2010) | 19 lines
remove empty audiohook write list on channel
If a channel has an audiohook write list created on it, that
list stays on the channel until the channel is destroyed. There
is no reason to keep that list on the channel if it becomes empty.
If it is empty that just means we are doing needless translating
for every ast_read and ast_write. This patch removes the audiohook
list from the channel once it is detected to be empty on either a
read or write. If a audiohook is added back to the channel after
this list is destroyed, the list just gets recreated as if it never
existed to begin with.
(closes issue #17630)
Reported by: manvirr
Review: https://reviewboard.asterisk.org/r/799/
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@279951 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279658 | qwell | 2010-07-26 18:03:38 -0500 (Mon, 26 Jul 2010) | 12 lines
Merged revisions 279657 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r279657 | qwell | 2010-07-26 17:59:52 -0500 (Mon, 26 Jul 2010) | 5 lines
Really fix sounds Makefile (and make it readableish).
There was a rather large syntax error that should have caused ALL versions of GNU make to fail.
I don't know how it worked.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@279659 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279504 | mmichelson | 2010-07-26 11:04:09 -0500 (Mon, 26 Jul 2010) | 14 lines
Allow for systems without locale support to be usable.
A recent change to SIP URI comparison code added a locale-specific
string comparison to the mix, and certain systems do not support
such functions. This fix allows for those systems to still use
Asterisk 1.8
(closes issue #17697)
Reported by: pprindeville
Patches:
asterisk-trunk-bugid17697.patch uploaded by pprindeville (license 347)
Tested by: mmichelson
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@279533 f38db490-d61c-443f-a65b-d21fe96a405b
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277814 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277773 f38db490-d61c-443f-a65b-d21fe96a405b
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@276347 f38db490-d61c-443f-a65b-d21fe96a405b
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271689 | mnicholson | 2010-06-22 07:52:27 -0500 (Tue, 22 Jun 2010) | 8 lines
Modify chan_sip's packet generation api to automatically calculate the Content-Length. This is done by storing packet content in a buffer until it is actually time to send the packet, at which time the size of the packet is calculated. This change was made to ensure that the Content-Length is always correct.
(closes issue #17326)
Reported by: kenner
Tested by: mnicholson, kenner
Review: https://reviewboard.asterisk.org/r/693/
........
This change also adds an ast_str_copy_string() function (similar to ast_copy_string), that copies one ast_str into another, properly handling embedded nulls.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@271690 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271399 | jpeeler | 2010-06-18 14:28:24 -0500 (Fri, 18 Jun 2010) | 11 lines
Fix crash when parsing some heavily nested statements in AEL on reload.
Due to the recursion used when compiling AEL in gen_prios, all the stack space
was being consumed when parsing some AEL that contained nesting 13 levels deep.
Changing a few large buffers to be heap allocated fixed the crash, although I
did not test how many more levels can now be safely used.
(closes issue #16053)
Reported by: diLLec
Tested by: jpeeler
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@271483 f38db490-d61c-443f-a65b-d21fe96a405b
This way the libraries can be found even if they are in
non-standard locations.
(closes issue #16155)
Reported by: jcollie
Patches:
0008-change-configure.ac-to-look-for-pkg-config-gmime-2.0.patch uploaded by jcollie (license 412)
Tested by: jsmith, tilghman, pabelanger
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@270042 f38db490-d61c-443f-a65b-d21fe96a405b
Valgrind pointed out that attempting to get an IE value from an event that has
no IEs produces an invalid memory read past the end of the event. Thanks to
mmichelson for pointing the problem out to me and then testing the fix.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@269417 f38db490-d61c-443f-a65b-d21fe96a405b
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@268894 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r267759 | tilghman | 2010-06-03 20:16:26 -0500 (Thu, 03 Jun 2010) | 7 lines
Make the default install path appear to be /usr on Linux, instead of /usr/local.
Also, reorganize the options, so that they're more alphabetical.
(closes issue #17013)
Reported by: klaus3000
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@267775 f38db490-d61c-443f-a65b-d21fe96a405b
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@267261 f38db490-d61c-443f-a65b-d21fe96a405b
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@267096 f38db490-d61c-443f-a65b-d21fe96a405b
This changes the sample slinear frame data to contain non-zero data so that
translation calculations for speex works when preprocessing and VAD is turned
on. The encoder expects samples to be returned, but when attempted with the
mentioned two options and silent sample frames everything was discarded.
(closes issue #17240)
Reported by: seandarcy
Review: https://reviewboard.asterisk.org/r/682/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@267065 f38db490-d61c-443f-a65b-d21fe96a405b
Added ability to send and receive ETSI Explicit Call Transfer (ECT)
messages to eliminate tromboned calls.
Note: Asterisk already supported initiating the transfer of calls to
eliminate tromboned calls to libpri so there was nothing to do for the
asterisk portion.
Review: https://reviewboard.asterisk.org/r/520/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@266926 f38db490-d61c-443f-a65b-d21fe96a405b
This uses a modified version of pabelanger's patch that checks for NTLM support
instead, which was added in 0.29.0 which is what is required for
res_calendar_ews.
(closes issue #17391)
Reported by: loloski
Patches:
issue17391.patch.v2 uploaded by pabelanger (license 224)
Tested by: twilson
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@265793 f38db490-d61c-443f-a65b-d21fe96a405b
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@265747 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@265090 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines
Allow ast_safe_sleep to defer specific frames until after the sleep has concluded.
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@264997 f38db490-d61c-443f-a65b-d21fe96a405b
From reviewboard:
The problem here is a bit complex, so try to bear with me...
It was noticed by a Digium customer that generic PLC (as configured in
codecs.conf) did not appear to actually be having any sort of benefit when
packet loss was introduced on an RTP stream. I reproduced this issue myself
by streaming a file across an RTP stream and dropping approx. 5% of the
RTP packets. I saw no real difference between when PLC was enabled or disabled
when using wireshark to analyze the RTP streams.
After analyzing what was going on, it became clear that one of the problems
faced was that when running my tests, the translation paths were being set
up in such a way that PLC could not possibly work as expected. To illustrate,
if packets are lost on channel A's read stream, then we expect that PLC will
be applied to channel B's write stream. The problem is that generic PLC can
only be done when there is a translation path that moves from some codec to
SLINEAR. When I would run my tests, I found that every single time, read
and write translation paths would be set up on channel A instead of channel
B. There appeared to be no real way to predict which channel the translation
paths would be set up on.
This is where Kevin swooped in to let me know about the transcode_via_sln
option in asterisk.conf. It is supposed to work by placing a read translation
path on both channels from the channel's rawreadformat to SLINEAR. It also
will place a write translation path on both channels from SLINEAR to the
channel's rawwriteformat. Using this option allows one to predictably set up
translation paths on all channels. There are two problems with this, though.
First and foremost, the transcode_via_sln option did not appear to be working
properly when I was placing a SIP call between two endpoints which did not
share any common formats. Second, even if this option were to work, for PLC
to be applied, there had to be a write translation path that would go from
some format to SLINEAR. It would not work properly if the starting format
of translation was SLINEAR.
The one-line change presented in this review request in chan_sip.c fixed the
first issue for me. The problem was that in sip_request_call, the
jointcapability of the outbound channel was being set to the format passed to
sip_request_call. This is nativeformats of the inbound channel. Because of this,
when ast_channel_make_compatible was called by app_dial, both channels already
had compatibly read and write formats. Thus, no translation path was set up at
the time. My change is to set the jointcapability of the sip_pvt created during
sip_request_call to the intersection of the inbound channel's nativeformats and
the configured peer capability that we determined during the earlier call to
create_addr. Doing this got the translation paths set up as expected when using
transcode_via_sln.
The changes presented in channel.c fixed the second issue for me. First and
foremost, when Asterisk is started, we'll read codecs.conf to see the value of
the genericplc option. If this option is set, and ast_write is called for a
frame with no data, then we will attempt to fill in the missing samples for
the frame. The implementation uses a channel datastore for maintaining the
PLC state and for creating a buffer to store PLC samples in. Even when we
receive a frame with data, we'll call plc_rx so that the PLC state will have
knowledge of the previous voice frame, which it can use as a basis for when
it comes time to actually do a PLC fill-in.
So, reviewers, now I ask for your help. First off, there's the one line change
in chan_sip that I have put in. Is it right? By my logic it seems correct, but
I'm sure someone can tell me why it is not going to work. This is probably the
change I'm least concerned about, though. What concerns me much more is the
set of changes in channel.c. First off, am I even doing it right? When I run
tests, I can clearly see that when PLC is activated, I see a significant increase
in RTP traffic where I would expect it to be. However, in my humble opinion, the
audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to
me than when no PLC is used at all. I need someone to review the logic I have used
to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic
is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm
sure someone can point out somewhere where I've done something incorrectly.
As I was writing this review request up, I decided to give the code a test run under
valgrind, and I find that for some reason, calls to plc_rx are causing some invalid
reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around
a bit to see why that is the case. If it's obvious to someone reviewing, speak up!
Finally, I have one other proposal that is not reflected in my code review. Since
without transcode_via_sln set, one cannot predict or control where a translation
path will be up, it seems to me that the current practice of using PLC only when
transcoding to SLINEAR is not useful. I recommend that once it has been determined
that the method used in this code review is correct and works as expected, then
the code in translate.c that invokes PLC should be removed.
Review: https://reviewboard.asterisk.org/r/622/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@264452 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264248 | tilghman | 2010-05-19 12:41:29 -0500 (Wed, 19 May 2010) | 17 lines
Internal timing is now on by default, if you're using DAHDI 2.3 or above.
The reason for ensuring DAHDI 2.3 or above is that this version ensures that
a timer is always available, whereas in previous versions, it was possible
for DAHDI to be loaded, but have no drivers to actually generate timing. If
internal_timing was turned on in this circumstance, a complete lack of audio
would result. This is the reason why internal_timing was not on by default.
However, now that DAHDI ensures the availability of a timer, there is no
reason for this setting to be off (and in fact, it solves a great many initial
user problems).
(closes issue #15932)
Reported by: dimas
Patches:
20100519__issue15932.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@264249 f38db490-d61c-443f-a65b-d21fe96a405b
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@263541 f38db490-d61c-443f-a65b-d21fe96a405b
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262852 f38db490-d61c-443f-a65b-d21fe96a405b
Clean up chan_sip.c to use new AST_CLI functions
(closes issue #17287)
Reported by: pabelanger
Patches:
issue17287.patch uploaded by pabelanger (license 224)
Tested by: russell
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262613 f38db490-d61c-443f-a65b-d21fe96a405b
Revision -r1489 of the libpri 1.4 branch corrected a deviation from Q.931
Section 5.3.2. However, this resulted in an unexpected behaviour change
to the upper layer (Asterisk).
This change uses pri_hangup_fix_enable() to follow Q.931 Section 5.3.2
call hangup better if the version of libpri supports it.
(issue #17104)
Reported by: shawkris
Tested by: rmudgett
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262569 f38db490-d61c-443f-a65b-d21fe96a405b
Also cleanup the formatting and add a few more that seem like good candidates.
(closes issue #16157)
Reported by: wimpy
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262513 f38db490-d61c-443f-a65b-d21fe96a405b
We nicely detect the right flags on each system for building Asterisk with
pthreads, then ignore it for every other build option that requires us to
build with pthreads. This caused some items to return a false negative.
Also cleanup some minor naming issues that caused "library library" redundancy
in the output.
(closes issue #17303)
Reported by: stuarth
Patches:
20100507__issue17303.diff.txt uploaded by tilghman (license 14)
Tested by: stuarth
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@261913 f38db490-d61c-443f-a65b-d21fe96a405b
We have some functions inside the AstData API to get the tree
in XML form, but it is not required at the moment to compile
asterisk and we can disable that part of the API if we don't have
libxml2 support.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@260521 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260049 | dvossel | 2010-04-29 10:31:02 -0500 (Thu, 29 Apr 2010) | 14 lines
Fixes crash in audiohook_write_list
The middle_frame in the audiohook_write_list function was
being freed if a audiohook manipulator returned a failure.
This is incorrect logic. This patch resolves this and
adds detailed descriptions of how this function should work
and why manipulator failures must be ignored.
(closes issue #17052)
Reported by: dvossel
Tested by: dvossel
(closes issue #16196)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/623/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@260050 f38db490-d61c-443f-a65b-d21fe96a405b
The fax session initilization code for T.38 faxes has been rewritten. T.38 session initialization was removed from generic_fax_exec, and split into two different code paths for receive and send. Also the 'z' option (to send a T.38 reinvite if we do not receive one) was added to sendfax.
In the output of 'fax show sessions', the 'Type' column has been renamed to 'Tech' and replaced with a new 'Tech' column that will report 'G.711' or 'T.38'.
Control of ECM defaults has been added to res_fax
A 'fax show settings' CLI command has been added.
Support of the new AST_T38_REQUEST_PARMS control method request to handle channels that have already received a T.38 reinvite before the FAX application is start has been added.
Support for the 'fax show settings' command has been added to res_fax_spandsp and handling of the ECM flag has been slightly altered.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@258896 f38db490-d61c-443f-a65b-d21fe96a405b
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@258557 f38db490-d61c-443f-a65b-d21fe96a405b
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@258517 f38db490-d61c-443f-a65b-d21fe96a405b
These changes add the ability to run 'make asterisk.txt' just like the existing
'make asterisk.pdf' commands to generate a text document from the TeX files we
have in the doc/tex/ directory. I've also updated a few of the .tex files because
they weren't properly escaping certain characters so they would show up as Unicode
characters (like [U+021C]). Made changes to the configure scripts so it would
detect the catdvi program which is required to convert the .dvi file generated
by latex.
I've also added a few lines to the build_tools/prep_tarball script so that the
text documentation gets generated and added to future tarballs of Asterisk
releases.
(closes issue #17220)
Reported by: lmadsen
Patches:
asterisk.txt.patch uploaded by lmadsen (license 10)
asterisk.txt.patch-v4 uploaded by pabelanger (license 224)
Tested by: lmadsen, pabelanger
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@258351 f38db490-d61c-443f-a65b-d21fe96a405b
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@258190 f38db490-d61c-443f-a65b-d21fe96a405b
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@256528 f38db490-d61c-443f-a65b-d21fe96a405b
From Review Board:
There are two interrelated changes here.
First, there is the introduction of func_srv. This adds two new read-only
dialplan functions, SRVQUERY and SRVRESULT. They work very similarly to the
ENUMQUERY and ENUMRESULT functions, except that this allows one to query SRV
records instead. In order to facilitate this work, I added a couple of new API
calls to srv.h. ast_srv_get_record_count tells the number of records returned
by an SRV lookup. This number is calculated at the time of the SRV lookup.
ast_srv_get_nth_record allows one to get a numbered SRV record.
Second, there is the modification to chan_sip that allows one to specify a
hostname or IP address (along with a port) to send an outgoing INVITE to when
dialing a SIP peer. This goes hand-in-hand with func_srv. You can query SRV
records and then use the host and port from the results to dial via a specific
host instead of what is configured in sip.conf.
Review: https://reviewboard.asterisk.org/r/608
SWP-1200
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@256485 f38db490-d61c-443f-a65b-d21fe96a405b
SWP-1229
ABE-2161
* Ensure chan_local.c:local_call() will not leak cid.cid_dnid when
copying.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@256104 f38db490-d61c-443f-a65b-d21fe96a405b
The ast_channel structure had a field used for linking a channel into a
linked list, but now that ast_channel structures are ao2 objects, this is
no longer needed, and could be harmful as ao2 objects really shouldn't
ever be placed into linked lists (since those lists don't assist with
reference count management on the objects).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@254637 f38db490-d61c-443f-a65b-d21fe96a405b
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@254450 f38db490-d61c-443f-a65b-d21fe96a405b
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@253917 f38db490-d61c-443f-a65b-d21fe96a405b
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@252089 f38db490-d61c-443f-a65b-d21fe96a405b
The mis-placement of the latest entry meant that when it was set, it was writing
one index past the end of the properties array in the ast_rtp_instance (which
happened to be the local_address field).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@250871 f38db490-d61c-443f-a65b-d21fe96a405b
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@250565 f38db490-d61c-443f-a65b-d21fe96a405b
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@249893 f38db490-d61c-443f-a65b-d21fe96a405b
1. The documentation for ast_str_set and ast_str_append state that
the max_len parameter may be -1 in order to limit the size of the
ast_str to its current allocated size. The problem was that the max_len
parameter in all cases was a size_t, which is unsigned. Thus a -1 was
interpreted as UINT_MAX instead of -1. Changing the max_len parameter
to be ssize_t fixed this issue.
2. Once issue 1 was fixed, there was an off-by-one error in the case
where we attempted to write a string larger than the current allotted
size to a string when -1 was passed as the max_len parameter. When trying
to write more than the allotted size, the ast_str's __AST_STR_USED was
set to 1 higher than it should have been. Thanks to Tilghman for quickly
spotting the offending line of code.
Oh, and the unit test that I referenced in the top line of this commit
will be added to reviewboard shortly. Sit tight...
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@247335 f38db490-d61c-443f-a65b-d21fe96a405b
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@246260 f38db490-d61c-443f-a65b-d21fe96a405b
Detect all platforms that don't like that, either, and ensure that when documentation is
missing, we pass a non-NULL pointer when outputting the corresponding documentation.
(closes issue #16689)
Reported by: bklang
Patches:
20100209__issue16689__with_tests.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/497/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@246030 f38db490-d61c-443f-a65b-d21fe96a405b
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@245864 f38db490-d61c-443f-a65b-d21fe96a405b
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@243200 f38db490-d61c-443f-a65b-d21fe96a405b
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@242919 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@242521 f38db490-d61c-443f-a65b-d21fe96a405b
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@241143 f38db490-d61c-443f-a65b-d21fe96a405b
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@239957 f38db490-d61c-443f-a65b-d21fe96a405b
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@238635 f38db490-d61c-443f-a65b-d21fe96a405b
The ast_test_status_update() function is defined in test.h.
When TEST_FRAMEWORK is not enabled a macro is defined as a no-op
place holder for this function. The macro did not contain
the correct number of arguments. This caused a compile error.
Much thanks to wdoekes for reporting the issue and supplying the
patch!
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@238091 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@237406 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@236613 f38db490-d61c-443f-a65b-d21fe96a405b
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@236027 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@235660 f38db490-d61c-443f-a65b-d21fe96a405b
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@235342 f38db490-d61c-443f-a65b-d21fe96a405b