https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@326412 f38db490-d61c-443f-a65b-d21fe96a405b
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@308582 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@299091 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@291760 f38db490-d61c-443f-a65b-d21fe96a405b
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@276347 f38db490-d61c-443f-a65b-d21fe96a405b
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@249893 f38db490-d61c-443f-a65b-d21fe96a405b
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@220457 f38db490-d61c-443f-a65b-d21fe96a405b
This fixes a crash reported in #asterisk-dev where chan_mgcp unexpectedly
allocated an RTP instance from res_rtp_multicast, since by not specifying an
engine, you get the first one in the list of engines.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@211732 f38db490-d61c-443f-a65b-d21fe96a405b
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@203638 f38db490-d61c-443f-a65b-d21fe96a405b
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@186078 f38db490-d61c-443f-a65b-d21fe96a405b
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142992 f38db490-d61c-443f-a65b-d21fe96a405b
jabber.conf). The actual connection is made when a call comes in
Asterisk.
Apply this fix to Jingle too.
Fix the ast_aji_get_client function that was not able to retrieve an
XMPP client from its JID.
(closes issue #12085)
Reported by: junky
Tested by: phsultan
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@119741 f38db490-d61c-443f-a65b-d21fe96a405b
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117802 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114708 | tilghman | 2008-04-27 23:47:39 -0500 (Sun, 27 Apr 2008) | 5 lines
When modules are embedded, they take on a different name, without the ".so"
extension. Specifically check for this name, when we're checking if a module
is loaded.
(Closes issue #12534)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114709 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114487 f38db490-d61c-443f-a65b-d21fe96a405b
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89333 f38db490-d61c-443f-a65b-d21fe96a405b
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89071 f38db490-d61c-443f-a65b-d21fe96a405b
SIP Phone 1 --- [chan_sip]Asterisk 1[chan_jingle] --- [chan_jingle]Asterisk 2[chan_sip] --- SIP Phone 2
Modifications :
- set bridge type to partial ;
- process media candidates from the remote peer properly.
Now we have Jingle audio, at least between two Asterisk Jingle
clients.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@85777 f38db490-d61c-443f-a65b-d21fe96a405b
No real Jingle implementation being available, testing was made using
two Asterisk servers relaying SIP calls over their Jingle channels:
SIP Phone 1 --- [chan_sip]Asterisk 1[chan_jingle] --- [chan_jingle]Asterisk 2[chan_sip] --- SIP Phone 2
Thus, it was possible to test the code in both ways, and make the
Jingle channel comply with the latest specifications. No sound available yet.
Main modifications include :
- modified the 'jingle_candidate' structure and the
'jingle_create_candidates' function according to XEP-0176 ;
- modified the 'jingle_action' function in order to properly terminate
a Jingle session, in conformance with XEP-0166 ;
- modified username format used in STUN requests ;
- actually make the bindaddr configuration field useable.
Todo :
- set audio paths up (no native bridging) ;
- make the CLI gtalk functions available to jingle ;
- clean up the storage space used in strings.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@83743 f38db490-d61c-443f-a65b-d21fe96a405b
lmadsen