https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317479 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@276347 f38db490-d61c-443f-a65b-d21fe96a405b
There is a race condition between console_hangup()
and start_stream(). It is possible for console_hangup()
to be called and then the stream thread to begin after the hangup.
To avoid this a check in start_stream() to make sure the pvt-owner
still exists while the pvt lock is held is made. If the owner
is gone that means the channel hung up and start_stream should
be aborted.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262236 f38db490-d61c-443f-a65b-d21fe96a405b
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@249893 f38db490-d61c-443f-a65b-d21fe96a405b
* chan_console accessed pvts after deallocation.
* cdr_mysql stored a pointer that was freed by realloc()
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
* The event subsystem sometimes creates an event with no IEs. Due to a corner
condition, the code would read beyond the memory boundary.
* res_pktccops did not correctly check whether its monitor thread was started.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@228798 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@222176 f38db490-d61c-443f-a65b-d21fe96a405b
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@203638 f38db490-d61c-443f-a65b-d21fe96a405b
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@196072 f38db490-d61c-443f-a65b-d21fe96a405b
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@158959 f38db490-d61c-443f-a65b-d21fe96a405b
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@155401 f38db490-d61c-443f-a65b-d21fe96a405b
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@145121 f38db490-d61c-443f-a65b-d21fe96a405b
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142992 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@140489 f38db490-d61c-443f-a65b-d21fe96a405b
never indicate a match, so nothing would have been returned anyway, but it was
still a poor example of proper usage.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135439 f38db490-d61c-443f-a65b-d21fe96a405b
Fixes a bug where if a stream monitor thread was not created (caused from failure of opening or starting the stream) pthread_cancel was called with an invalid thread ID.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121163 f38db490-d61c-443f-a65b-d21fe96a405b
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117802 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114891 | russell | 2008-04-30 11:30:01 -0500 (Wed, 30 Apr 2008) | 28 lines
Merge changes from team/russell/iax2_find_callno and iax2_find_callno_1.4
These changes address a critical performance issue introduced in the latest
release. The fix for the latest security issue included a change that made
Asterisk randomly choose call numbers to make them more difficult to guess by
attackers. However, due to some inefficient (this is by far, an understatement)
code, when Asterisk chose high call numbers, chan_iax2 became unusable after
just a small number of calls. On a small embedded platform, it would not be
able to handle a single call. On my Intel Core 2 Duo @ 2.33 GHz, I couldn't
run more than about 16 IAX2 channels. Ouch.
These changes address some performance issues of the find_callno() function
that have bothered me for a very long time. On every incoming media frame,
it iterated through every possible call number trying to find a matching
active call. This involved a mutex lock and unlock for each call number
checked. So, if the random call number chosen was 20000, then every media
frame would cause 20000 locks and unlocks. Previously, this problem was
not as obvious since Asterisk always chose the lowest call number it could.
A second container for IAX2 pvt structs has been added. It is an astobj2
hash table. When we know the remote side's call number, the pvt goes into
the hash table with a hash value of the remote side's call number. Then,
lookups for incoming media frames are a very fast hash lookup instead of an
absolutely insane array traversal.
In a quick test, I was able to get more than 3600% more IAX2 channels
on my machine with these changes.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114892 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114487 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r106235 | file | 2008-03-05 18:32:10 -0400 (Wed, 05 Mar 2008) | 4 lines
Add a control frame to indicate the source of media has changed. Depending on the underlying technology it may need to change some things.
(closes issue #12148)
Reported by: jcomellas
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@106239 f38db490-d61c-443f-a65b-d21fe96a405b
is currently active for the Asterisk CLI, or to set it. Also, knock multiple device
support off of the to-do list.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@99248 f38db490-d61c-443f-a65b-d21fe96a405b
- Add support for multiple devices. All devices are configured in console.conf.
- Add "console list devices" CLI command to show configured devices. Also, changed
the old "list devices" to be "list available", which queries PortAudio for all
audio devices that are available for use.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@99227 f38db490-d61c-443f-a65b-d21fe96a405b
of a hack. It just asks the core to generate the same tone that it would when
you hear ringback when making an outbound call. But hey, it works, and you get
the localized ring tone for the appropriate language set on the channel.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@96079 f38db490-d61c-443f-a65b-d21fe96a405b
to an 8 kHz endpoint, then codec_resample will automatically be used to properly
resample the audio before sending it to/from chan_console.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95527 f38db490-d61c-443f-a65b-d21fe96a405b
Add a new console channel driver, chan_console, which is a console channel
driver that uses portaudio as a cross platform audio interface. It was written
to provide a console channel driver that works with Mac CoreAudio, but it
supports a number of other audio interfaces, as well, including OSS and ALSA.
It could one day be the single console channel driver, but does not yet have
as many features as chan_oss.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95412 f38db490-d61c-443f-a65b-d21fe96a405b
lmadsen