Version 0.3.0 from FTP
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@589 f38db490-d61c-443f-a65b-d21fe96a405b
This commit is contained in:
parent
185a3fdd7e
commit
051ab5fe0a
|
@ -23,6 +23,16 @@ context=default
|
|||
;
|
||||
switchtype=national
|
||||
;
|
||||
; PRI Dialplan: Only RARELY used for PRI.
|
||||
;
|
||||
; unknown: Unknown
|
||||
; private: Private ISDN
|
||||
; local: Local ISDN
|
||||
; national: National ISDN
|
||||
; international: International ISDN
|
||||
;
|
||||
;pridialplan=national
|
||||
;
|
||||
; Signalling method (default is fxs). Valid values:
|
||||
; em: E & M
|
||||
; em_w: E & M Wink
|
||||
|
@ -37,6 +47,15 @@ switchtype=national
|
|||
; fxo_ks: FXO (Kewl Start)
|
||||
; pri_cpe: PRI signalling, CPE side
|
||||
; pri_net: PRI signalling, Network side
|
||||
; The following are used for Radio interfaces:
|
||||
; fxs_rx: Receive audio/COR on an FXS kewlstart interface (FXO at the channel bank)
|
||||
; fxs_tx: Transmit audio/PTT on an FXS loopstart interface (FXO at the channel bank)
|
||||
; fxo_rx: Receive audio/COR on an FXO loopstart interface (FXS at the channel bank)
|
||||
; fxo_tx: Transmit audio/PTT on an FXO groundstart interface (FXS at the channel bank)
|
||||
; em_rx: Receive audio/COR on an E&M interface (1-way)
|
||||
; em_tx: Transmit audio/PTT on an E&M interface (1-way)
|
||||
; em_txrx: Receive audio/COR AND Transmit audio/PTT on an E&M interface (2-way)
|
||||
; em_rxtx: same as em_txrx (for our dyslexic friends)
|
||||
;
|
||||
signalling=fxo_ls
|
||||
;
|
||||
|
@ -81,6 +100,10 @@ transfer=yes
|
|||
;
|
||||
cancallforward=yes
|
||||
;
|
||||
; Whether or not to support Call Return (*69)
|
||||
;
|
||||
callreturn=yes
|
||||
;
|
||||
; Stutter dialtone support: If a mailbox is specified, then when voicemail
|
||||
; is received in that mailbox, taking the phone off hook will cause
|
||||
; a stutter dialtone instead of a normal one
|
||||
|
@ -97,7 +120,14 @@ echocancel=yes
|
|||
; when the circuit path is entirely TDM. You may, however, reverse this
|
||||
; behavior by enabling the echo cancel during pure TDM bridging below.
|
||||
;
|
||||
echocancelwhenbridged=no
|
||||
echocancelwhenbridged=yes
|
||||
;
|
||||
; If you are having trouble with DTMF detection, you can relax the
|
||||
; DTMF detection parameters. Relaxing them may make the DTMF detector
|
||||
; more likely to have "talkoff" where DTMF is detected when it
|
||||
; shouldn't be.
|
||||
;
|
||||
;relaxdtmf=yes
|
||||
;
|
||||
; You may also set the default receive and transmit gains (in dB)
|
||||
;
|
||||
|
@ -135,6 +165,21 @@ immediate=no
|
|||
;
|
||||
;adsi=yes
|
||||
;
|
||||
; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
|
||||
; etc, it can be useful to perform busy detection either in an effort to
|
||||
; detect hangup or for detecting busies
|
||||
;
|
||||
;busydetect=yes
|
||||
;
|
||||
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
|
||||
; of a call through RINGING, BUSY, and ANSWERING. If turned on, call
|
||||
; progress attempts to determine answer, busy, and ringing on phone lines.
|
||||
; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
|
||||
; so don't count on it being very accurate. Also, it is ONLY configured for
|
||||
; standard U.S. tones
|
||||
;
|
||||
;callprogress=yes
|
||||
;
|
||||
; Select which class of music to use for music on hold. If not specified
|
||||
; then the default will be used.
|
||||
;
|
||||
|
@ -190,7 +235,7 @@ immediate=no
|
|||
;
|
||||
; Strip most significant digit (9) before sending
|
||||
;
|
||||
stripmsd=1
|
||||
;stripmsd=1
|
||||
;callerid=asreceived
|
||||
;group=0
|
||||
;signalling=fxs_ls
|
||||
|
@ -215,3 +260,4 @@ stripmsd=1
|
|||
; signalling = pri_cpe
|
||||
; group = 2
|
||||
; channel => 1-23
|
||||
|
||||
|
|
Reference in New Issue