162 lines
3.6 KiB
Plaintext
162 lines
3.6 KiB
Plaintext
![]() |
;
|
||
|
; Zapata telephony interface
|
||
|
;
|
||
|
; Configuration file
|
||
|
|
||
|
[channels]
|
||
|
;
|
||
|
; Default language
|
||
|
;
|
||
|
;language=en
|
||
|
;
|
||
|
; Default context
|
||
|
;
|
||
|
context=default
|
||
|
;
|
||
|
; Switchtype: Only used for PRI.
|
||
|
;
|
||
|
; national: National ISDN
|
||
|
; dms100: Nortel DMS100
|
||
|
; 4ess: AT&T 4ESS
|
||
|
; 5ess: Lucent 5ESS
|
||
|
;
|
||
|
switchtype=national
|
||
|
;
|
||
|
; Signalling method (default is fxs). Valid values:
|
||
|
; em: E & M
|
||
|
; em_w: E & M Wink
|
||
|
; featd: Feature Group D (The fake, Adtran style)
|
||
|
; fxs_ls: FXS (Loop Start)
|
||
|
; fxs_gs: FXS (Ground Start)
|
||
|
; fxs_ks: FXS (Kewl Start)
|
||
|
; fxo_ls: FXO (Loop Start)
|
||
|
; fxo_gs: FXO (Ground Start)
|
||
|
; fxo_ks: FXO (Kewl Start)
|
||
|
; pri_cpe: PRI signalling, CPE side
|
||
|
; pri_net: PRI signalling, Network side
|
||
|
;
|
||
|
signalling=fxo_ls
|
||
|
;
|
||
|
; A variety of timing parameters can be specified as well
|
||
|
; Including:
|
||
|
; prewink: Pre-wink time
|
||
|
; preflash: Pre-flash time
|
||
|
; wink: Wink time
|
||
|
; flash: Flash time
|
||
|
; start: Start time
|
||
|
; rxwink: Receiver wink time
|
||
|
; rxflash: Receiver flashtime
|
||
|
; debounce: Debounce timing
|
||
|
;
|
||
|
rxwink=300 ; Atlas seems to use long (250ms) winks
|
||
|
;
|
||
|
; Whether or not to use caller ID
|
||
|
;
|
||
|
usecallerid=yes
|
||
|
;
|
||
|
; Whether or not to hide outgoing caller ID (Override with *67 or *82)
|
||
|
;
|
||
|
hidecallerid=no
|
||
|
;
|
||
|
; Whether or not to enable call waiting on FXO lines
|
||
|
;
|
||
|
callwaiting=yes
|
||
|
;
|
||
|
; Support Caller*ID on Call Waiting
|
||
|
;
|
||
|
callwaitingcallerid=yes
|
||
|
;
|
||
|
; Support three-way calling
|
||
|
;
|
||
|
threewaycalling=yes
|
||
|
;
|
||
|
; Support flash-hook call transfer (requires three way calling)
|
||
|
;
|
||
|
transfer=yes
|
||
|
;
|
||
|
; Enable echo cancellation
|
||
|
;
|
||
|
echocancel=yes
|
||
|
;
|
||
|
; You may also set the default receive and transmit gains (in dB)
|
||
|
;
|
||
|
rxgain=0.0
|
||
|
txgain=0.0
|
||
|
;
|
||
|
; Logical groups can be assigned to allow outgoing rollover. Groups
|
||
|
; range from 0 to 31, and multiple groups can be specified.
|
||
|
;
|
||
|
group=1
|
||
|
;
|
||
|
; Specify whether the channel should be answered immediately or
|
||
|
; if the simple switch should provide dialtone, read digits, etc.
|
||
|
;
|
||
|
immediate=no
|
||
|
;
|
||
|
; CallerID can be set to "asreceived" or a specific number
|
||
|
; if you want to override it. Note that "asreceived" only
|
||
|
; applies to trunk interfaces.
|
||
|
;
|
||
|
;callerid=2564286000
|
||
|
;
|
||
|
; Each channel consists of the channel number or range. It
|
||
|
; inherits the parameters that were specified above its declaration
|
||
|
;
|
||
|
;callerid="Green Phone"<(256) 428-6121>
|
||
|
;channel => 1
|
||
|
;callerid="Black Phone"<(256) 428-6122>
|
||
|
;channel => 2
|
||
|
;callerid="CallerID Phone" <(256) 428-6123>
|
||
|
;callerid="CallerID Phone" <(630) 372-1564>
|
||
|
;callerid="CallerID Phone" <(256) 704-4666>
|
||
|
;channel => 3
|
||
|
;callerid="Pac Tel Phone" <(256) 428-6124>
|
||
|
;channel => 4
|
||
|
;callerid="Uniden Dead" <(256) 428-6125>
|
||
|
;channel => 5
|
||
|
;callerid="Cortelco 2500" <(256) 428-6126>
|
||
|
;channel => 6
|
||
|
;callerid="Main TA 750" <(256) 428-6127>
|
||
|
;channel => 44
|
||
|
;
|
||
|
; For example, maybe we have some other channels
|
||
|
; which start out in a different context and use
|
||
|
; E & M signalling instead.
|
||
|
;
|
||
|
;context=remote
|
||
|
;sigalling=em
|
||
|
;channel => 15
|
||
|
;channel => 16
|
||
|
|
||
|
;signalling=em_w
|
||
|
;
|
||
|
; All those in group 0 I'll use for outgoing calls
|
||
|
;
|
||
|
; Strip most significant digit (9) before sending
|
||
|
;
|
||
|
stripmsd=1
|
||
|
;callerid=asreceived
|
||
|
;group=0
|
||
|
;signalling=fxs_ls
|
||
|
;channel => 45
|
||
|
|
||
|
;signalling=fxo_ls
|
||
|
;group=1
|
||
|
;callerid="Joe Schmoe" <(256) 428-6131>
|
||
|
;channel => 25
|
||
|
;callerid="Megan May" <(256) 428-6132>
|
||
|
;channel => 26
|
||
|
;callerid="Suzy Queue" <(256) 428-6233>
|
||
|
;channel => 27
|
||
|
;callerid="Larry Moe" <(256) 428-6234>
|
||
|
;channel => 28
|
||
|
;
|
||
|
; Sample PRI (CPE) config: Specify the switchtype, the signalling as
|
||
|
; either pri_cpe or pri_net for CPE or Network termination, and generally
|
||
|
; you will want to create a single "group" for all channels of the PRI.
|
||
|
;
|
||
|
; switchtype = national
|
||
|
; sig = pri_cpe
|
||
|
; group = 2
|
||
|
; channel => 1-23
|