f4754dcb37
Restructure: Move fm_modulation from common code to 'libfm'
2017-11-25 19:24:02 +01:00
7af9b752a0
Restructure: Move 'libgermantone' to a-netz code
2017-11-25 19:23:59 +01:00
40c24a70b2
Restructure: Move emphasis from common code to 'libemphasis'
2017-11-25 19:23:56 +01:00
16194c15f9
Restructure: Move goertzel from common code to 'libgoertzel'
2017-11-25 19:23:54 +01:00
c84318b245
Restructure: Move jitter from common code to 'libjitter'
2017-11-25 19:23:53 +01:00
8f6d0752df
Restructure: Move squelch from common code to 'libsquelch'
2017-11-25 19:23:50 +01:00
ac7bb3539f
Restructure: Move wave from common code to 'libwave'
2017-11-25 19:23:47 +01:00
ffd934709f
Restructure: Move classic German tones from common code to 'libgermanton'
2017-11-13 20:14:03 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
1b183864bb
Restructure: Move sample rate conversion from common code to 'libsamplerate'
2017-11-13 19:34:05 +01:00
669705c6ed
Restructure: Move filters from common code to 'libfilter'
2017-11-13 19:15:09 +01:00
aeb31a7a34
A-Netz: Number of operator can be defined now
...
Since A-Netz does not allow automatic dialing, the call is forwarded
to an operator. Use -O <number> to change the default operator's number.
2017-11-05 16:59:59 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
b6326aa473
Move commonly used German tones (A/B/C-Netz) to separate lib.a
2017-09-11 20:35:18 +02:00
7017fd7b3c
Give hint to alter PKG_CONFIG_PATH, if SoapySDR or UHD was not found
2017-09-11 20:31:29 +02:00
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
cff7622f5c
Move mobile phone specific code from libcommon.a to libmobile.a
2017-09-01 18:42:49 +02:00
3c0bcce97b
Move German tones from common code to individual implementation
2017-09-01 18:42:48 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
7c9ce960d7
Fixes of checking digits
2017-08-08 12:54:21 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
bf0abd627d
A-Netz: Option to set gain of paging tones
2017-02-18 21:00:54 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
57993e3e48
Support for UHD SDR interface
2017-02-18 21:00:49 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
16e1e842b9
A-Netz: Don't allow emphasis, since it is not used with A-Netz
2017-01-02 10:16:49 +01:00
e724823c5b
A-Netz: Reset tone detector when going idle
...
A pending tone must be detected as soon as the cell is idle. This happens
if the phone picks up during release guard time.
2017-01-02 10:13:43 +01:00
3400f555fe
Add common function to give hotkey help
...
* Key to dial and hangup
* Key to display wave form
2016-12-09 16:42:38 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
f111c50478
A-Netz / B-Netz: Add function to change state, debug with channel info
...
Change state uses a function rather than directly setting state
variable.
Some debug commands now use channel number. (for multi-trx setups)
2016-12-06 17:47:58 +01:00
Andreas Eversberg
0b43b63d1f
Fixed command line option descriptions
2016-11-29 10:59:09 +01:00
d52d0242bf
Output enhancements
...
* no more flicker on wave form display while scrolling
* dialing console gets cleared/overwritten correctly
* fixes on stderr output
2016-11-29 07:49:21 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
Andreas Eversberg
481181fa74
A-Netz: Click removal when changing sequenced paging tones
...
When tone changes to next tone, a transition of 2ms is performed. The last
tone is faded out and the new tone faded in.
2016-11-14 18:36:50 +01:00
2a4abc62b2
Move realtime scheduling and signal handling to common code
2016-11-13 06:37:56 +01:00
Andreas Eversberg
Andreas Eversberg