Martin Hauke
75765d49b7
Fixed many typos in output and source code comments
2019-07-15 21:14:52 +02:00
Andreas Eversberg
13245c56f6
C-Netz: Add authentication support (process only)
...
No real authentication, since the algorithm and the keys inside the cards
are not known. A challenge can be specified and optionally the response
can be verified.
2019-06-30 14:51:01 +02:00
Andreas Eversberg
1321f66456
C-Netz: Add option to control voice deviation
2019-01-02 15:58:34 +01:00
Andreas Eversberg
40aec4f14c
C-Netz: Swtitch speech scrambler only after receiving 3 consecutive frames with different scrambler mode
2018-07-01 09:18:07 +02:00
Andreas Eversberg
3a5fa8837c
Improved emphasis
2018-02-16 15:54:39 +01:00
Andreas Eversberg
1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
Andreas Eversberg
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
Andreas Eversberg
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
Andreas Eversberg
7b539d5dc7
Restructure: Move mncc from common code to 'libmncc'
2017-11-25 19:28:33 +01:00
Andreas Eversberg
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
Andreas Eversberg
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
Andreas Eversberg
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
Andreas Eversberg
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
Andreas Eversberg
dfdad21e3f
C-Netz: Work on system informations, metering and call queues
...
- Make system informations configurable
- Simulate call mertering
- Support for call queues on busy voice channels
2017-09-01 18:42:51 +02:00
Andreas Eversberg
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
76a3484c5c
C-Netz: Make demodulation algorithm (slope or leve) slectable via option
...
By default (auto), the algorithm is selected, depending on sound card
or SDR usage. For testing and debugging purpose, the algorithm can be
forced.
2017-05-19 19:11:59 +02:00
Andreas Eversberg
ef7ff26793
C-Netz: SDR now uses zero-crossing to detect level changes.
...
This does not work with analog radio, but with SDR it works.
The quality should be better and the process is faster.
2017-05-17 20:06:46 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
3fb2ade352
C-Netz: Fix release of call process when no dialing was received from phone
2017-02-18 21:02:48 +01:00
Andreas Eversberg
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
Andreas Eversberg
8cb0187133
C-Netz: Remove the obviously useless noise function for unused timeslots
2017-02-18 21:01:17 +01:00
Andreas Eversberg
71e556e7ff
Work on emphasis filter: Neutral @ 1000 Hz; Use filter before de-emphasis
2017-02-18 21:01:11 +01:00
Andreas Eversberg
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
Andreas Eversberg
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
Andreas Eversberg
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
Andreas Eversberg
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
Andreas Eversberg
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
Andreas Eversberg
27c6e3d860
C-Netz: Add code documentation...
2016-12-01 17:59:08 +01:00
Andreas Eversberg
e34d74aa23
C-Netz: Simplifying TX signal clock sync between two channels
2016-11-30 18:09:38 +01:00
Andreas Eversberg
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
Andreas Eversberg
c6d3a41b81
C-Netz: Increment error counter only when trying to reach the phone
2016-10-23 11:50:02 +02:00
Andreas Eversberg
1ea95de120
C-Netz: Use emphasis with 200 uS time constant
2016-10-23 08:46:05 +02:00
Andreas Eversberg
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
Andreas Eversberg
17930af920
C-Netz: callref is moved completely to transaction object
2016-10-02 09:06:04 +02:00
Andreas Eversberg
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
Andreas Eversberg
767daf73cd
C-Netz: Documentation of the call process in the source code
2016-08-13 15:22:28 +02:00
Andreas Eversberg
7f786fc00a
C-Netz: Fix missing callref assignment (MT call)
2016-08-07 17:20:06 +02:00
Andreas Eversberg
3a7388ba7f
C-Netz: Fixed some debugging output
2016-08-03 12:40:55 +02:00
Andreas Eversberg
2bd7c16baa
C-Netz: Add support for extended frequency band. (October 1989)
2016-08-03 12:40:54 +02:00
Andreas Eversberg
c9012c7663
C-Netz: Release MT call, if mobile phone does not respond
2016-08-02 09:02:58 +02:00
Andreas Eversberg
ce7a98206a
C-Netz: Move callref to transaction. Callref on SpK only when its busy.
...
Only when busy, the channel has callref. This is required for audio
routing. During setup, the callref assigned to transaction and kept
there until release to/from upper layer.
2016-08-01 19:17:13 +02:00
Andreas Eversberg
664f8c7ac0
C-Netz: retry call setup messages up to 3 times
2016-08-01 12:15:12 +02:00
Andreas Eversberg
f729b32745
C-Netz: Fixed multi-transceiver mode and show channel in various logs
2016-07-31 18:48:19 +02:00
Andreas Eversberg
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
Andreas Eversberg
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
Andreas Eversberg
e10898c1e8
C-Netz: Minor cosmetic fixes
2016-06-18 08:05:18 +02:00