Martin Hauke
75765d49b7
Fixed many typos in output and source code comments
2019-07-15 21:14:52 +02:00
c357ab5ad5
Allow dialing national and international prefix for AMPS/TACS
2019-07-06 07:30:18 +02:00
5311f44daa
minor fixes of some prints; fix NMT message counter bug
2018-12-23 19:53:28 +01:00
56d8df5351
Rework of displaying supervisory info: NMT and AMPS
...
Using lower rate to show debug info of supervisory signal.
Display supervisory info for NMT and AMPS at measurement display screen.
2018-08-31 20:05:38 +02:00
32cefbbffc
Transcode fourth digit of TACS phone number correctly, if it is 0.
2018-04-19 21:08:45 +02:00
3a5fa8837c
Improved emphasis
2018-02-16 15:54:39 +01:00
6df0eb46cc
Fix compiler warnings
2018-02-15 08:00:15 +01:00
1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
7b539d5dc7
Restructure: Move mncc from common code to 'libmncc'
2017-11-25 19:28:33 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
5c33b8824b
AMPS/TACS: Fixing release towards mobile station on FVC
...
We must continuously send release frames until Signaling Tone changes,
so we know that the phone has received the release.
2017-11-05 16:58:36 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
3e1da04f14
AMPS: Minor fixes to loopback test
2017-10-02 12:34:27 +02:00
c1fe179d5d
AMPS: Fix 'use-after-free-bug' after destroying transaction
2017-09-24 14:11:54 +02:00
94ed39f5e2
JTACS: Implementation of the Japanese variant of TACS
2017-09-01 18:42:54 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
3788b3e8a5
TACS support (variations added to AMPS code)
...
These are:
- Bandwidth only 25 KHz, so lower deviations
- Data rate only 8000 KHz
- SID is called AID (Area ID)
- MIN1 coding is different
2017-07-15 07:38:09 +02:00
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
bb64c6b3ba
AMPS: Add DTX support
...
When DTX is enabled (-S dtx=2 or 3), a missing SAT tone causes the receiver
to mute audio and insert a low level of comfort noise.
Also the missing SAT tone will not cause the connection to be terminated.
2017-06-10 13:08:19 +02:00
56024b384b
AMPS: Serveral minor fixes
2017-05-23 18:11:10 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
bd7ccc5fa0
Add global DC-Filter and remove all individual DC-Filters
2017-02-18 21:01:12 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
a5fd375237
Fixed typos
2017-02-18 21:00:55 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
eed826387a
work on docs
2016-12-06 17:46:12 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
63f39e105b
AMPS: Fixes for multi transceiver support
...
- Fix channel assignment
- Voice channel sends test tone when idle
- Changed paging timeout
- Minor fix of SCC field in 2 messages
2016-10-30 09:37:14 +01:00
bb92a1f3b0
AMPS: Add option to be more tollerant to sync detection
...
Also it detects more false syncs, but this is ignored if decoding fails.
2016-10-29 14:38:49 +02:00
1ea95de120
C-Netz: Use emphasis with 200 uS time constant
2016-10-23 08:46:05 +02:00
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
b07509cf2d
AMPS: Correcting channel number range
2016-10-02 09:06:06 +02:00
ad3c88e064
AMPS: Callref is moved completely to transaction object
2016-10-02 09:06:04 +02:00
53814241b3
AMPS: Note about future callref handling
2016-08-03 12:03:53 +02:00
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
f87e36fa47
AMPS: Detect difference between paging response and call response
...
Release call, if paging response was received, after call from fixed
network has already been released.
2016-06-19 17:41:42 +02:00
d2c4ca4fa9
Implementation of Advanced Mobile Phone Service (AMPS)
2016-06-17 17:03:29 +02:00
Martin Hauke
Andreas Eversberg
Andreas Eversberg