Andreas Eversberg
3c0bcce97b
Move German tones from common code to individual implementation
2017-09-01 18:42:48 +02:00
Andreas Eversberg
d2472cfca6
Emphasis: Add filter to prevent emphasis above 4000 Hz
...
Remove obsolete filter from fsk.c.
2017-09-01 18:42:47 +02:00
Andreas Eversberg
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
Andreas Eversberg
064d95f37e
Fixup: SDR: Show IQ data with three colors
...
Use correct threshold values to display colors
2017-09-01 18:42:42 +02:00
Andreas Eversberg
ea7cbb8675
SDR: Add option to enable TX timestamps on UHD devices (disabled by default)
2017-08-16 18:51:47 +02:00
Andreas Eversberg
8489914bf0
SDR: Add time consumption debug code
2017-08-16 18:51:46 +02:00
Andreas Eversberg
42a87c1c2f
SDR: Name SDR TX and RX threads
2017-08-16 18:51:46 +02:00
Andreas Eversberg
3afcac8342
SDR: Add option to swap RX and TX frequencies (for testing)
2017-08-10 17:42:54 +02:00
Andreas Eversberg
f2d439c1ae
UHD: Remove buggy sample rate check
2017-08-10 15:59:29 +02:00
Andreas Eversberg
999b6a2b4d
UHD: Make frequency settings more tollerant (+-100 Hz are accepted)
2017-08-09 17:27:14 +02:00
Andreas Eversberg
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
Andreas Eversberg
ffd3b848e1
Implementation of "Radiocom 2000", the analog French mobile network
2017-08-09 17:27:12 +02:00
Andreas Eversberg
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
Andreas Eversberg
d20b41a457
Fixed command line option for call audio device (headset)
...
--call-device option now works.
Thanx to Fabricio pointing to this bug.
2017-08-08 12:54:45 +02:00
Andreas Eversberg
5090f5a18d
SDR: Show IQ data with three colors to detect input overdrive
...
green: up to 0.45
yellow: between 0.45 and 0.9
red: above 0.9
2017-08-08 12:54:03 +02:00
Andreas Eversberg
0cbd9657d2
Move Hagelbarger error correction code from NMT to common code
...
It will be used by Radiocom 2000 also.
Some minor fixes and improvements apply.
2017-08-08 12:53:48 +02:00
Andreas Eversberg
6c64025717
Move FFSK modem from NMT to common code, so it can be used by other networks
2017-08-08 12:53:34 +02:00
Andreas Eversberg
92ce6d4a42
SDR: Using threads for read and write when doing resampling
2017-08-08 12:53:02 +02:00
Andreas Eversberg
a088536533
Minor fix for IQ data display
2017-07-15 12:45:20 +02:00
Andreas Eversberg
fda224c27f
Fixing and improving SDR support (SoapySDR and UHD)
...
- Soapy SDR now works.
- Channels can be selected.
- Antennas can be listed and selected.
- Device args, tune args, stream args can be specified.
2017-07-15 12:45:19 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
aa20d4e50e
Cleanup common/Makefile.am
2017-07-15 07:38:15 +02:00
Andreas Eversberg
085ceb9173
Minor fixes to compandor
2017-07-15 07:38:12 +02:00
Andreas Eversberg
d23672354f
Add option to set MNCC socket name (to run multiple base stations)
2017-06-10 13:08:26 +02:00
Andreas Eversberg
329463bb8c
SDR: Add option to give channel number
...
Using SoapySDR server allows to run different networks on multi channel
SDR devices.
2017-06-10 13:08:25 +02:00
Andreas Eversberg
aef4cf0997
Make spectrum display nicer by plotting continuous lines between samples
2017-06-10 13:08:24 +02:00
Andreas Eversberg
e0534db15c
Make spectrum display a little nicer by using '|' instead of ':'
2017-06-10 13:08:23 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
2c1ab89723
Notify about usage of channels that are next to each other
...
It is required to have at least one free channel between channels, to
avoid interferences.
This is only a warning, it will not reject channels next to each other.
2017-05-24 14:01:25 +02:00
Andreas Eversberg
fc3b3e07be
Finetuning LOSS (noise) detection
...
The algorithm is still bad, but works in most cases
2017-05-24 14:00:08 +02:00
Andreas Eversberg
0557bbbc43
SDR: Checking given parameters with a tollerance of up to 0.001
...
Rounding errors may cause given parameters to be changed a little.
When comparing the set-values with the get-value, a small amount
of tollerance must be allowed.
Thanx to Syvain, pointing to this bug!
2017-05-17 20:06:47 +02:00
Andreas Eversberg
683078a7a0
SDR: Spectrum display will not scale FFT result
...
Instead the greatest possible width that will fit into the window will
be used. This width is 2 to the power of N.
2017-05-17 20:06:46 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
Andreas Eversberg
d03443c4f1
SDR: Added SoapySDR's compiler flags to common/Makefile
2017-05-15 21:46:30 +02:00
Andreas Eversberg
c04d046210
SDR: Fixed SoapySDR's arguments parsing
2017-05-15 21:46:30 +02:00
Andreas Eversberg
fbdb9ece01
SDR: Allow direct IQ TX and RX instead of fm modulating a list of channels
...
This is performed by reading and writing IQ data to "sample" pointer with
channel number set to 0.
2017-05-15 21:46:29 +02:00
Andreas Eversberg
65694f3b80
SDR: disable TX or RX by setting TX or RX frequency to 0
...
This way it is possible to use SDR simplex
2017-05-15 21:46:29 +02:00
Andreas Eversberg
6e0e0c9ce8
fixup Rework on audio buffer management
2017-05-15 21:46:28 +02:00
Andreas Eversberg
9dda9e1efc
SDR: Add option to set IF bandwidth. If not defined, sampling rate is used.
2017-05-15 21:46:27 +02:00
Andreas Eversberg
1445ca2fac
SDR: Add option to send (previously recorded) IQ data instead of TX data
2017-05-15 21:46:26 +02:00
Andreas Eversberg
8e0d7d2513
samplerate.c: Allow transcoding to lower sample rate other than 8000 Hz
2017-03-04 16:52:20 +01:00
Andreas Eversberg
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
Andreas Eversberg
4201717f36
Rework on audio buffer management
...
Use function to get samples to be sent to fill audio buffers to a
level. This replaces the function that only shows how much data
is in the buffer.
This way the function itself can control how much data will be
sent.
2017-03-04 06:35:38 +01:00
Andreas Eversberg
2e1999b1ee
Start streaming of sound/SDR just before main loop
...
This prevents buffer overflow during init/creation processes
2017-02-25 07:09:53 +01:00
Andreas Eversberg
04fd1ddcea
Use thread to record and playback wave files without blocking
2017-02-25 06:29:09 +01:00
Andreas Eversberg
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
Andreas Eversberg
290b365d67
SDR: Move FM modulation algorithms to a seperate file
2017-02-18 21:02:51 +01:00
Andreas Eversberg
4c0f8e7e95
Rework of sample rate conversion by using linear interpolation
2017-02-18 21:02:51 +01:00
Andreas Eversberg
47f74b38ce
SDR transmits with full amplitude
2017-02-18 21:02:50 +01:00