cellular-infrastructure
/
osmocom-analog
9
1
Fork 2
Code Issues 11 Pull Requests 2 Projects Releases Wiki Activity

C-Netz: Make memory card emulation work with AEG OLYMPIA phone 

Now it is ok to have the first clock pulse after reset. The software
does not care. At least there must be a clock after rising the reset.
This commit is contained in:
Andreas Eversberg 2023-08-27 11:52:53 +02:00
parent 20b5132ef7
commit d09e9c95fd
1 changed files with 14 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
extra/simulator/simulator.ino
View File

@ -17,11 +17,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* NOTE: Reset must be an input pin, not the reset of the controller.
* The clock pulse must be detected during reset.
*/
#if defined(__AVR_ATtiny85__)
#define RST_PIN 2
#define CLK_PIN 3
#define DATA_PIN 4
#error UNTESTED!
#else
#define CLK_PIN 5
#define RST_PIN 6
@ -29,15 +31,14 @@
#endif
uint8_t card_data[] = {
/* Example: Service card for AEG OLYMPIA. */
0xff, 0xf7, 0x5c, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x4b, 0x90,
0x5f, 0x25, 0x07, 0x0c, 0x00, 0x00, 0xfe, 0xfd,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x47, 0x38,
0x78, 0x28, 0x07, 0x8c, 0xc7, 0x03, 0xfe, 0xfd,
0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
};
volatile uint8_t *rst_in, *clk_in, *data_in, *data_out, *data_mode;
@ -70,6 +71,8 @@ void setup()
data_out = portOutputRegister(port);
data_in = portInputRegister(port);
*data_mode |= data_bit; /* output */
/* wait for reset */
while (!(*rst_in & rst_bit));
}
uint8_t byte_count;
@ -78,22 +81,14 @@ uint8_t bit_count;
void loop()
{
reset:
/* initial reset state */
byte_count = 0;
bit_count = 0;
/* wait for reset pulse */
while (!(*rst_in & rst_bit));
/* now we have reset, so we wait for clock pulse */
while (!(*clk_in & clk_bit)) {
/* if we lost reset, go to start */
if (!(*rst_in & rst_bit))
goto reset;
}
while ((*clk_in & clk_bit)) {
/* if we lost reset, go to start */
if (!(*rst_in & rst_bit))
goto reset;
}
*data_out |= data_bit; /* high */
/* now we have reset, so we wait for the first clock pulse */
while (!(*clk_in & clk_bit));
while ((*clk_in & clk_bit));
/* wait for reset to become low, if not already before first clock pulse (AEG phone) */
while ((*rst_in & rst_bit));
next_bit: