Osmocom GSM/GPRS/EGPRS transceiver, originally forked from OpenBTS transceiver. For building SDR based GSM BTS with osmo-bts-trx.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1406 lines
68 KiB

<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
<node id='_common_cmds_'>
<name>Common Commands</name>
<description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
<command id='help'>
<params>
<param name='help' doc='Description of the interactive help system' />
</params>
</command>
<command id='list'>
<params>
<param name='list' doc='Print command list' />
</params>
</command>
<command id='write terminal'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='terminal' doc='Write to terminal' />
</params>
</command>
<command id='write file [PATH]'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='file' doc='Write to configuration file' />
<param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
</params>
</command>
<command id='write memory'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='memory' doc='Write configuration to the file (same as write file)' />
</params>
</command>
<command id='write'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id='show running-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='running-config' doc='running configuration' />
</params>
</command>
<command id='exit'>
<params>
<param name='exit' doc='Exit current mode and down to previous mode' />
</params>
</command>
<command id='end'>
<params>
<param name='end' doc='End current mode and change to enable mode.' />
</params>
</command>
</node>
<node id='view'>
<name>view</name>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='enable'>
<params>
<param name='enable' doc='Turn on privileged mode command' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='main' doc='Main generic category' />
<param name='trxclk' doc='TRX Master Clock' />
<param name='trxctrl' doc='TRX CTRL interface' />
<param name='trxddl' doc='TRX Data interface Downlink' />
<param name='trxdul' doc='TRX CTRL interface Uplink' />
<param name='dev' doc='Device/Driver specific code' />
<param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='main' doc='Main generic category' />
<param name='trxclk' doc='TRX Master Clock' />
<param name='trxctrl' doc='TRX CTRL interface' />
<param name='trxddl' doc='TRX Data interface Downlink' />
<param name='trxdul' doc='TRX CTRL interface Uplink' />
<param name='dev' doc='Device/Driver specific code' />
<param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show trx'>
<params>
<param name='show' doc='Show running system information' />
<param name='trx' doc='Display information on the TRX' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
</node>
<node id='enable'>
<name>enable</name>
<command id='disable'>
<params>
<param name='disable' doc='Turn off privileged mode command' />
</params>
</command>
<command id='configure terminal'>
<params>
<param name='configure' doc='Configuration from vty interface' />
<param name='terminal' doc='Configuration terminal' />
</params>
</command>
<command id='copy running-config startup-config'>
<params>
<param name='copy' doc='Copy configuration' />
<param name='running-config' doc='Copy running config to... ' />
<param name='startup-config' doc='Copy running config to startup config (same as write file)' />
</params>
</command>
<command id='show startup-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='startup-config' doc='Contentes of startup configuration' />
</params>
</command>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='terminal monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='terminal no monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='main' doc='Main generic category' />
<param name='trxclk' doc='TRX Master Clock' />
<param name='trxctrl' doc='TRX CTRL interface' />
<param name='trxddl' doc='TRX Data interface Downlink' />
<param name='trxdul' doc='TRX CTRL interface Uplink' />
<param name='dev' doc='Device/Driver specific code' />
<param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='main' doc='Main generic category' />
<param name='trxclk' doc='TRX Master Clock' />
<param name='trxctrl' doc='TRX CTRL interface' />
<param name='trxddl' doc='TRX Data interface Downlink' />
<param name='trxdul' doc='TRX CTRL interface Uplink' />
<param name='dev' doc='Device/Driver specific code' />
<param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show trx'>
<params>
<param name='show' doc='Show running system information' />
<param name='trx' doc='Display information on the TRX' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
</node>
<node id='config'>
<name>config</name>
<command id='hostname WORD'>
<params>
<param name='hostname' doc='Set system&apos;s network name' />
<param name='WORD' doc='This system&apos;s network name' />
</params>
</command>
<command id='no hostname [HOSTNAME]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='hostname' doc='Reset system&apos;s network name' />
<param name='[HOSTNAME]' doc='Host name of this router' />
</params>
</command>
<command id='password (8|) WORD'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN line password string' />
</params>
</command>
<command id='password LINE'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
</params>
</command>
<command id='enable password (8|) WORD'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
</params>
</command>
<command id='enable password LINE'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
</params>
</command>
<command id='no enable password'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
</params>
</command>
<command id='banner motd default'>
<params>
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
<param name='default' doc='Default string' />
</params>
</command>
<command id='banner motd file [FILE]'>
<params>
<param name='banner' doc='Set banner' />
<param name='motd' doc='Banner for motd' />
<param name='file' doc='Banner from a file' />
<param name='[FILE]' doc='Filename' />
</params>
</command>
<command id='no banner motd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
</params>
</command>
<command id='service terminal-length &lt;0-512&gt;'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='no service terminal-length [&lt;0-512&gt;]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='line vty'>
<params>
<param name='line' doc='Configure a terminal line' />
<param name='vty' doc='Virtual terminal' />
</params>
</command>
<command id='service advanced-vty'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='no service advanced-vty'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='log stderr'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='no log stderr'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='log file .FILENAME'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='no log file .FILENAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='log alarms &lt;2-32700&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
<param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
</params>
</command>
<command id='no log alarms'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
</params>
</command>
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='authpriv' doc='Security/authorization messages facility' />
<param name='cron' doc='Clock daemon (cron/at) facility' />
<param name='daemon' doc='General system daemon facility' />
<param name='ftp' doc='Ftp daemon facility' />
<param name='lpr' doc='Line printer facility' />
<param name='mail' doc='Mail facility' />
<param name='news' doc='News facility' />
<param name='user' doc='Generic facility' />
<param name='uucp' doc='UUCP facility' />
</params>
</command>
<command id='log syslog local &lt;0-7&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='local' doc='Syslog LOCAL facility' />
<param name='&lt;0-7&gt;' doc='Local facility number' />
</params>
</command>
<command id='no log syslog'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
</params>
</command>
<command id='log gsmtap [HOSTNAME]'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='gsmtap' doc='Logging via GSMTAP' />
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
<command id='ctrl'>
<params>
<param name='ctrl' doc='Configure the Control Interface' />
</params>
</command>
<command id='trx'>
<params>
<param name='trx' doc='Configure the TRX' />
</params>
</command>
<command id='stats reporter statsd'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='no stats reporter statsd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='stats reporter log'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='no stats reporter log'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='stats interval &lt;1-65535&gt;'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='interval' doc='Set the reporting interval' />
<param name='&lt;1-65535&gt;' doc='Interval in seconds' />
</params>
</command>
</node>
<node id='config-log'>
<name>config-log</name>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='main' doc='Main generic category' />
<param name='trxclk' doc='TRX Master Clock' />
<param name='trxctrl' doc='TRX CTRL interface' />
<param name='trxddl' doc='TRX Data interface Downlink' />
<param name='trxdul' doc='TRX CTRL interface Uplink' />
<param name='dev' doc='Device/Driver specific code' />
<param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
</node>
<node id='config-stats'>
<name>config-stats</name>
<command id='local-ip ADDR'>
<params>
<param name='local-ip' doc='Set the IP address to which we bind locally' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='no local-ip'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='local-ip' doc='Set the IP address to which we bind locally' />
</params>
</command>
<command id='remote-ip ADDR'>
<params>
<param name='remote-ip' doc='Set the remote IP address to which we connect' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='remote-port &lt;1-65535&gt;'>
<params>
<param name='remote-port' doc='Set the remote port to which we connect' />
<param name='&lt;1-65535&gt;' doc='Remote port number' />
</params>
</command>
<command id='mtu &lt;100-65535&gt;'>
<params>
<param name='mtu' doc='Set the maximum packet size' />
<param name='&lt;100-65535&gt;' doc='Size in byte' />
</params>
</command>
<command id='no mtu'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='mtu' doc='Set the maximum packet size' />
</params>
</command>
<command id='prefix PREFIX'>
<params>
<param name='prefix' doc='Set the item name prefix' />
<param name='PREFIX' doc='The prefix string' />
</params>
</command>
<command id='no prefix'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='prefix' doc='Set the item name prefix' />
</params>
</command>
<command id='level (global|peer|subscriber)'>
<params>
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Report global groups only' />
<param name='peer' doc='Report global and network peer related groups' />
<param name='subscriber' doc='Report global, peer, and subscriber groups' />
</params>
</command>
<command id='enable'>
<params>
<param name='enable' doc='Enable the reporter' />
</params>
</command>
<command id='disable'>
<params>
<param name='disable' doc='Disable the reporter' />
</params>
</command>
</node>
<node id='config-line'>
<name>config-line</name>
<command id='login'>
<params>
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='no login'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='bind A.B.C.D [&lt;0-65535&gt;]'>
<params>
<param name='bind' doc='Accept VTY telnet connections on local interface' />
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
<param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
</params>
</command>
</node>
<node id='config-ctrl'>
<name>config-ctrl</name>
<command id='bind A.B.C.D'>
<params>
<param name='bind' doc='Set bind address to listen for Control connections' />
<param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
</params>
</command>
</node>
<node id='config-trx'>
<name>config-trx</name>
<command id='bind-ip A.B.C.D'>
<params>
<param name='bind-ip' doc='Set the IP address for the local bind' />
<param name='A.B.C.D' doc='IPv4 Address' />
</params>
</command>
<command id='remote-ip A.B.C.D'>
<params>
<param name='remote-ip' doc='Set the IP address for the remote BTS' />
<param name='A.B.C.D' doc='IPv4 Address' />
</params>
</command>
<command id='base-port &lt;1-65535&gt;'>
<params>
<param name='base-port' doc='Set the TRX Base Port' />
<param name='&lt;1-65535&gt;' doc='TRX Base Port' />
</params>
</command>
<command id='dev-args DESC'>
<params>
<param name='dev-args' doc='Set the device-specific arguments to pass to the device' />
<param name='DESC' doc='Device-specific arguments' />
</params>
</command>
<command id='tx-sps (1|4)'>
<params>
<param name='tx-sps' doc='Set the Tx Samples-per-Symbol' />
<param name='1' doc='Tx Samples-per-Symbol' />
<param name='4' doc='(null)' />
</params>
</command>
<command id='rx-sps (1|4)'>
<params>
<param name='rx-sps' doc='Set the Rx Samples-per-Symbol' />
<param name='1' doc='Rx Samples-per-Symbol' />
<param name='4' doc='(null)' />
</params>
</command>
<command id='clock-ref (internal|external|gpsdo)'>
<params>
<param name='clock-ref' doc='Set the Reference Clock' />
<param name='internal' doc='Enable internal reference (default)' />
<param name='external' doc='Enable external 10 MHz reference' />
<param name='gpsdo' doc='Enable GPSDO reference' />
</params>
</command>
<command id='multi-arfcn (disable|enable)'>
<params>
<param name='multi-arfcn' doc='Enable multi-ARFCN transceiver (default=disable)' />
<param name='disable' doc='(null)' />
<param name='enable' doc='(null)' />
</params>
</command>
<command id='offset FLOAT'>
<params>
<param name='offset' doc='Set the baseband frequency offset (default=0, auto)' />
<param name='FLOAT' doc='Baseband Frequency Offset' />
</params>
</command>
<command id='rssi-offset FLOAT'>
<params>
<param name='rssi-offset' doc='Set the RSSI to dBm offset in dB (default=0)' />
<param name='FLOAT' doc='RSSI to dBm offset in dB' />
</params>
</command>
<command id='swap-channels (disable|enable)'>
<params>
<param name='swap-channels' doc='Swap channels (default=disable)' />
<param name='disable' doc='(null)' />
<param name='enable' doc='(null)' />
</params>
</command>
<command id='egprs (disable|enable)'>
<params>
<param name='egprs' doc='Enable EDGE receiver (default=disable)' />
<param name='disable' doc='(null)' />
<param name='enable' doc='(null)' />
</params>
</command>
<command id='ext-rach (disable|enable)'>
<params>
<param name='ext-rach' doc='Enable extended (11-bit) RACH (default=disable)' />
<param name='disable' doc='(null)' />
<param name='enable' doc='(null)' />
</params>
</command>
<command id='rt-prio &lt;1-32&gt;'>
<params>
<param name='rt-prio' doc='Set the SCHED_RR real-time priority' />
<param name='&lt;1-32&gt;' doc='Real time priority' />
</params>
</command>
<command id='filler type (zero|dummy|random-nb-gmsk|random-nb-8psk|random-ab)'>
<params>
<param name='filler' doc='Filler burst settings' />
<param name='type' doc='Filler burst type (default=zero)' />
<param name='zero' doc='Send an empty burst when there is nothing to send (default)' />
<param name='dummy' doc='Send a dummy burst when there is nothing to send on C0 (TRX0) and empty burst on other channels. Use for OpenBTS compatibility only, don&apos;t use with OsmoBTS as it breaks encryption.' />
<param name='random-nb-gmsk' doc='Send a GMSK modulated Normal Burst with random bits when there is nothing to send. Use for spectrum mask testing. Configure &apos;filler tsc&apos; to set training sequence.' />
<param name='random-nb-8psk' doc='Send an 8-PSK modulated Normal Burst with random bits when there is nothing to send. Use for spectrum mask testing. Configure &apos;filler tsc&apos; to set training sequence.' />
<param name='random-ab' doc='Send an Access Burst with random bits when there is nothing to send. Use for Rx/Tx alignment. Configure &apos;filler access-burst-delay&apos; to introduce artificial delay.' />
</params>
</command>
<command id='filler tsc &lt;0-7&gt;'>
<params>
<param name='filler' doc='Filler burst settings' />
<param name='tsc' doc='Set the TSC for GMSK/8-PSK Normal Burst random fillers. Used only with &apos;random-nb-gmsk&apos; and &apos;random-nb-8psk&apos; filler types. (default=0)' />
<param name='&lt;0-7&gt;' doc='TSC' />
</params>
</command>
<command id='filler access-burst-delay &lt;0-68&gt;'>
<params>
<param name='filler' doc='Filler burst settings' />
<param name='access-burst-delay' doc='Set the delay for Access Burst random fillers. Used only with &apos;random-ab&apos; filler type. (default=0)' />
<param name='&lt;0-68&gt;' doc='RACH delay in symbols' />
</params>
</command>
<command id='ctr-error-threshold (rx_overruns|tx_underruns|rx_drop_events|rx_drop_samples|tx_drop_events|tx_drop_samples) &lt;0-65535&gt; (per-second|per-minute|per-hour|per-day)'>
<params>
<param name='ctr-error-threshold' doc='Threshold rate for error counter' />
<param name='rx_overruns' doc='Set threshold value for rate_ctr device:rx_overruns' />
<param name='tx_underruns' doc='Set threshold value for rate_ctr device:tx_underruns' />
<param name='rx_drop_events' doc='Set threshold value for rate_ctr device:rx_drop_events' />
<param name='rx_drop_samples' doc='Set threshold value for rate_ctr device:rx_drop_samples' />
<param name='tx_drop_events' doc='Set threshold value for rate_ctr device:tx_drop_events' />
<param name='tx_drop_samples' doc='Set threshold value for rate_ctr device:tx_drop_samples' />
<param name='&lt;0-65535&gt;' doc='Value to set for threshold' />
<param name='per-second' doc='Threshold value sampled per-second' />
<param name='per-minute' doc='Threshold value sampled per-minute' />
<param name='per-hour' doc='Threshold value sampled per-hour' />
<param name='per-day' doc='Threshold value sampled per-day' />
</params>
</command>
<command id='no ctr-error-threshold (rx_overruns|tx_underruns|rx_drop_events|rx_drop_samples|tx_drop_events|tx_drop_samples) &lt;0-65535&gt; (per-second|per-minute|per-hour|per-day)'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='ctr-error-threshold' doc='Threshold rate for error counter' />
<param name='rx_overruns' doc='Set threshold value for rate_ctr device:rx_overruns' />
<param name='tx_underruns' doc='Set threshold value for rate_ctr device:tx_underruns' />
<param name='rx_drop_events' doc='Set threshold value for rate_ctr device:rx_drop_events' />
<param name='rx_drop_samples' doc='Set threshold value for rate_ctr device:rx_drop_samples' />
<param name='tx_drop_events' doc='Set threshold value for rate_ctr device:tx_drop_events' />
<param name='tx_drop_samples' doc='Set threshold value for rate_ctr device:tx_drop_samples' />
<param name='&lt;0-65535&gt;' doc='Value to set for threshold' />
<param name='per-second' doc='Threshold value sampled per-second' />
<param name='per-minute' doc='Threshold value sampled per-minute' />
<param name='per-hour' doc='Threshold value sampled per-hour' />
<param name='per-day' doc='Threshold value sampled per-day' />
</params>
</command>
<command id='stack-size &lt;0-2147483647&gt;'>
<params>
<param name='stack-size' doc='Set the stack size per thread in BYTE, 0 = OS default' />
<param name='&lt;0-2147483647&gt;' doc='Stack size per thread in BYTE' />
</params>
</command>
<command id='chan &lt;0-100&gt;'>
<params>
<param name='chan' doc='Select a channel to configure' />
<param name='&lt;0-100&gt;' doc='Channel index' />
</params>
</command>
</node>
<node id='config-trx-chan'>
<name>config-trx-chan</name>
<command id='rx-path NAME'>
<params>
<param name='rx-path' doc='Set the Rx Path' />
<param name='NAME' doc='Rx Path name' />
</params>
</command>
<command id='tx-path NAME'>
<params>
<param name='tx-path' doc='Set the Tx Path' />
<param name='NAME' doc='Tx Path name' />
</params>
</command>
</node>
</vtydoc>