At this stage, osmo-trx still uses the cmdline parameters top run the
device, but it is already able to parse all the same parameters from a
cfg file through the VTY and filling a trx_ctx structure which will be
later used to drive the device. Device config can be printed in the VTY
with "show trx".
Change-Id: Ie084c1b30b63f91c6e7640832ec1797d9e813832
Download the image from yesterday because linuxcontainers only contains the images of the last 3 days.
Change-Id: I75e270b7255c1cd7fca1674111b0f19fc7bba74f
We still need an intermediate class Logger due to osmo-trx being
multi-threaded and requiring to have a lock to use libosmocore, which is
not thread safe.
Change-Id: I30baac89f53e927f8699d0586b43cccf88ecd493
Up to this point, the logging system, vty and ctrl are initialized and
can be used fine, though they don't have a lot of use yet.
Depends on libosmocore Change-Id Ib79cdb62d45d8c78445c7b064e58eb7e9faeccf9
Related: OS#2184
Change-Id: I08982c37b4f873966304b3cfb38a10ee86eb3dad
This feature is currently not being used, so let's simplify current code
to move to libosmocore logging system in the future.
Change-Id: If2c77c776823f595130edac963be953026049423
This feature is currently not being used, so let's drop it to make it
easier to integrate into libosmocore logging system in the future.
Change-Id: I8282745ef0282d41599eaf94fe460a1d29b18e2a
It's only used internally inside the Logger module, and in case there's
an "alarm" (level more than critical) we still print on cerr, so we can
just rely on our system catching stderr instead of stdout to handle it.
Change-Id: I6d6df1578c3a4c1a37bd0d69952d443f62eed2ab
Fixes coverity CID 182757.
It's actually a false warning because "async_event_thrd" member is
protected by other member "started", so in practice it's never going to
be used before being initialized in start().
Change-Id: I5d5739bc9d08fe533e4d44c3992005a14e568a4f
Some devices have different Rx or Tx ports with different RF characteristics.
For instance LimeSDR has H (High), L (Low) and W (Wide) band Rx ports,
each of one being more suitable to a specific range of frequencies.
In case one wants to support several GSM bands, the best option is to
use the WideBand port and connect the antenna physically to that port in
the board. Then the firmware must be instructed ro read from that port.
Support for Rx/Tx port configuration is already in there for all the
layers (Limesuite, SoapySDR, SoapyUHD, UHD), but we are missing the
required bits in osmo-trx to make use of the available UHD API. This
commit addresses it.
Before this patch, the Rx/Tx paths configured could be changed by means
of the LimeSuiteGUI app, but after running osmo-trx, the values were
changed to the default ones.
One can now start using osmo-trx with 1 channel and specific Rx/Tx ports
by using for instance: osmo-trx -c 1 -y BAND1 -z LNAW
Default behaviour if no specific path or an empry path is passed ("") is
to do the same as preiously, ie. nothing by not calling the
set{T,R}xAntenna APIs.
One can also configure only specific channels, for instance to configure
only the first Tx channel and the second Rx channel:
osmo-trx -c 2 -y BAND1, -z ,LNAW
Change-Id: I1735e6ab05a05b0312d6d679b16ebd4a2260fa23
Let's disable this test in order to have passing jenkins jobs until we
find a better way to properly test this for different architectures.
Change-Id: I2320309bc8c1c20e2de6ef2e0f17472c68de80cb
The following logic doesn't require root access to run the tests, which
means we can easily run it inside jenkins.
Change-Id: Iba3f4de008662805d8ffc46e1f473e407b088fb8
Before this patch, the experession assert(then_secondws==then.seconds())
was failing in x86 architecture (and passing when adding a fprintf to
debug it). Avoid comparing the double values with == as that's usually a
bad idea, since the processor can output slightly different results for
the same operation depending on how it is optimized. Use timespec()
instead to check the invariant. Take the chance to refactor some
variables around to make the test easier to read.
Change-Id: Id4324be8ece86d371b1acb46bbd97856dfed241d
This fixes failures if the port is already being taken by other apps or
if this test is run several times concurrently in the same system.
Change-Id: Iea213375e489a56cf8ed3e47fe814e17c288803e
osmo-trx.cpp calls convert_init, which in case of building using
--with-neon is not implemented and the compiler stops with an error.
Error was introduced in 7e07cf2346.
Related: OS#2720
Change-Id: I9840d374d13b525b97f978ea0c5ed9e8421072a0
Without this line, destination address for a UDD socket is left with
incorrect value AF_UNSPEC. Later on when calling DatagramSocket:write(),
sendto() fails with EINVAL.
This commit fixes test SocketsTest.cpp.
Change-Id: I6e1b7e743a781abdcf69aa9842b30be893633433
Test files are moved from CommonLibs/ to tests/CommonLibs/.
Some tests are disabled in autotest because they generate timedate
related output which cannot exactly match against expected output.
Change-Id: I3d6ba625968be09297642d18090c496490e9b8fc
This is a required step towards getting rid of ConfigurationTable class
and libsqlite dependency.
As a side effect, support for different log levels for different files
is dropped, but it's not something really being used and we will end up
dropping current logging system in favour of osmocom's one in the future
anyway.
Change-Id: I51cb12d1ab7e103e78190ac71a70fb5bb1d9ff51
Pau Espin
Alexander Couzens
Alexander Huemer