osmotrxuhd is already being built since it's enabled by default, but
let's make it more explicit that we are building it too.
Change-Id: Ie9c224485cce047cd3ee4600ff7fbdb082355cdc
Sort cfg files according to their osmo-trx binary.
Install them during make install.
Add the installed cfg files to related debian packages.
Change-Id: I905cdac30b441e4df0a3f5c0924d1637b9f67b90
This resolves the following warning:
dpkg-source: warning: unknown information field 'Maintainer' in input data in package's section of control info file
Change-Id: I7a8d8c54eabccc5cedf7ad0a2bccf91f32f1bfdf
osmo-trx is a metapackage, no need for .install file.
Debug files are always put into osmo-trx-dbg, no osmo-trx-*-dbg.
Change-Id: I160dd83b265dcda52762a9f9c7eac9337928da35
Same way as we do in osmo-bts. After this commit, osmo-trx no longer
exists. Instead, osmo-trx-uhd and osmo-trx-usrp1 are generated based on
configure flags enabled.
A new flag --with(out)-uhd has been added to enable/disable build of
osmo-trx with UHD backend. It is left enabled by default to keep
compatibility with older build scripts. Binary with USRP1 backend must
still be manually enabled with --with-usrp1 flag.
Change-Id: Iea8c0d7434762713a53440d29bf3ebd84accb262
This is the first real tagged Osmocom release of OsmoTRX.
[ Alexander Chemeris ]
* EDGE: Add support for UmTRX.
* Common: Get rid of a compilation warning.
* Common: Make sure gLogEarly() log to the same facilities as the normal log.
* transceiver: Properly handle MAXDLY.
* transceiver: Add an option to generate random Access Bursts.
* osmo-trx: Output Rx SPS as a part of configuration output.
* transceiver: Do not pass transceiver state struct to function where it's not used.
* makefile: Fix build from an external path.
* radioDevice: GSMRATE macro must have parentheses around its definition.
* uhd: Fix comment.
* radioInterface: Initialize power scale with a meaningful default.
* transceiver: Log channel number in DEBUG output of demoded bursts.
* transceiver: Add an option to emulate a RACH delay in random filler mode.
* UHD: Initial LimeSDR support.
* CommonLibs: Remove unused files.
* sigProcLib: Typo sybols -> symbols
* radioBuffer: Remove extra ; at the end of inline function definitions.
* sigProcLib: Fix documentation, sync argument names in .cpp and .h files.
* sigProcLib: make energyDetect() simpler by returning actual energy.
* sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity.
* sigProcLib: Slice SoftVector instead of signalVector for GMSK demod.
* Call vectorSlicer() right before packing bits for transmission to osmo-bts.
* CommonLibs: Print soft bits with less confidence to console when printing a soft vector.
* BitVector: Remove convolutional codec - we don't use it in osmo-trx.
* BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits.
* signalVector: Implement segment().
* vector: Introduce segmentMove() method to move data inside of a vector.
* vector: Introduce shrink() function to shrink vector size without loosing data.
* Move CorrType type from Transceiver to sigProcLib.
* sigProcLib: rename signalError type to SignalError.
* Move Transceiver::detectBurst() to sigProcLib to make it reusable.
* Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable.
* sigProcLib: Add operator<< to print CorrType to a string.
* sigProcLib.h: Fix whitespaces. No non-whitespace changes.
* Move Transceiver::demodulate() to sigProcLib to make it reusable.
* sigProcLib: constify signalVector arguments for detectBurst() functions.
* sigProcLib: Constify demodulation functions burst argument.
* sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits.
* Configuration: Variables allocated with 'new' must be freed with 'delete'.
* BitVector: Remove Generator class.
* PRBS: a Pseudo-random binary sequence (PRBS) generator class.
[ Tom Tsou ]
* EDGE: Fix USRP B210 device support
* uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts
* EDGE: Fix demodulation slicer input
* common: Restrict UDP binding to localhost only
* common: Add mandatory length field to UDP receive calls
* uhd: Update default E3XX settings
* uhd: Set default Tx sampling to 4 sps
* uhd: Make device offset check a private method
* uhd: Set minimum UHD version requirement for E3XX
* sigproc: Expand RACH, TSC, and EDGE correlation windows
* transceiver: Do not report error on SETTSC when radio is on
* transceiver: Add Rx samples-per-symbol option
* radioInterface: Convert diversity argument to general type
* iface: Add inner ring-buffer implementation
* mcbts: Add multi-ARFCN channelizing filters
* mcbts: Add multi-ARFCN radio support
* sigproc: Adjust burst detection threshold criteria
* egprs: Enable 8-PSK length vectors on the Tx interface
* egprs: Enable 8-PSK burst detection when EDGE is enabled
* transceiver: Remove HANDOVER warnings
* mcbts: Allow out of order channel setup
* radioInterface: Fix multi-channel buffer index bug
* uhd: Add command line option for GPS reference
* transceiver: Fix mixed GSMK / 8-PSK transmission
* transceiver: Fix 4 SPS receive TOA value
* sigproc: Fix missing 8-PSK tail symbols
* uhd: Update USRP2/N200/N210 for 4 SPS Rx
* sigproc: Match differential GMSK start/end bits to tail bits
* uhd: Add missing B200 sample timing for 4 SPS receive
* transceiver: Fix command build warning
* uhd: Set minimum supported version to 3.9.0
* uhd: Add X300 sample timing for 4 SPS
* Revert "uhd: Set minimum supported version to 3.9.0"
* uhd: Add support for UHD-3.11 logging control
* uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz
* Resampler: Fix initialization return checking
* sigProcLib: Remove unreachable code and no-effect checks
* sigProcLib: Check return status on downsampling
* sigProcLib: Fix negative value check on unsigned value
* Resampler: Fix non-array delete for filter taps
* Transceiver: Remove unsigned negative compares
* Configuration: Fix const and signedness compile warnings
* config: Remove OpenBTS style sqlite configuration
* radioInterface: Remove UmTRX 'diversity' option
* build: Require and check for gcc C++11 support
* uhd: Use map container for for device parameter access
* sigProcLib: Remove unused functions from public interface
* uhd: Add non-UmTRX channel swap support
* uhd: Fix Tx-RX timing offset setting
* uhd: Fix USRP2/N200/N210 device detection
* transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices
* sigProcLib: Fix complex/real vector flag in Laurent modulator
* sigProcLib: Remove heap based signal vector allocations
* common: Declare explicit Vector move constructor
* sigProcLib: Remove trigonometric tables
* sigProcLib: Use explicit NaN check in sinc table generation
* sigProcLib: Replace dynamically allocated resampling buffers
* sigProcLib: Specify standard namespace for isnan()
* uhd: Always specify samples-per-symbol for device lookup
* LimeSDR: set approximate tx offset value to make GSM work
[ Neels Hofmeyr ]
* add basic .gitignore
* configure.ac: check for boost/config.hpp header
* The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it.
* add contrib/jenkins.sh, for gerrit build bot
[ pierre.baudry ]
* transceiver: Fix mismatched allocations and deallocations
[ Holger Hans Peter Freyther ]
* debian: Require fftw3 header files for osmo-trx
[ Max ]
* Add gerrit settings
* Integrate Debian packaging changes
* Remove embedded sqlite3
* Fix building against sqlite3
* Add autoconf-archive to dependencies
* debian: remove obsolete dependency
* deb: remove unused dependency
* Remove redundant explicit dependency
* Use release helper from libosmocore
[ Ruben Undheim ]
* Do not embed sqlite3 when building
[ Philipp Maier ]
* buildenv: Turn off native architecture builds
* cosmetic: Make parameter lists uniform
* Add test program to verify convolution implementation
* ssedetect: Add runtime CPU detection
* cosmetic: remove code duplication
* buildenv: Make build CPU invariant
* buildenv: Split up SSE3 and SSE4.1 code
* cosmetic: Add info about SSE support
[ Vadim Yanitskiy ]
* buildenv: correct the ax_sse macro description
* buildenv: actually strip unused cpuid functionality
* buildenv: fix build on systems without SIMD support
* buildenv: cosmetic changes
* buildenv: check for __builtin_cpu_supports call support
* ssedetect: call __builtin_cpu_supports() only if supported
[ Pau Espin Pedrol ]
* cosmetic: transciever: Remove trailing whitespaces
* transceiver: Avoid sending clock indications when trx is not powered on
* Add -j option to bind to specific address
[ ignasj ]
* LimeSDR: Change device detection to work with USB and PCIe versions
* LimeSDR: change tx window type to TX_WINDOW_FIXED
* LimeSDR: Fix sample value range
[ Harald Welte ]
* Add '-t' command line option to enable SCHED_RR
* Import git-version-gen and update AC_INIT()
Change-Id: Ibf3be6cc25e9b20d625b1f67972114b7f613f05c
There's no need to explicitly mention library package because
${shlibs:Depends} will take care of it automatically.
Change-Id: Ibd9cfc3673d828122edb85ba9de7ceb77f0299d0
The libdbd dependency is not used because libsqlite3 is used directly -
adjust debian/control to match.
Change-Id: Id2ab1facad703fa0c1d45084e70d41e73dbad6e7
Related: OS#1929
This should fix package build for Ubuntu 17.04: obsolete package
hardening-wrapper was removed which cause .deb build failure.
The dependency on it is incorrect to begin with because we use
DEB_BUILD_MAINT_OPTIONS instead.
Change-Id: I3ea72b4123a280a846086d083c4f3189d611f8cf
We use AX_EXT in ./configure for checking CPU features anyway, so it's
better to add it as explicit dependency.
Related: OS#1923
Change-Id: I7ba48e1df4ede8b477574da3faa15fd02e15c69b
* Explicitly check for sqlite3 at configure stage, remove old include
dir, fix header inclusion.
* Use configure results for linking instead of hardcoded linker option
for sqlite.
* Add dependency on -dev package for .deb
Change-Id: I6d7f697d67651f02ceb77fc4da4317b64fa47f9e
Fixes: OS#1928
debian/control:
* restructure to make it easier to incorporate further changes
* update package descriptions
* update project URL
debian/rules:
* use proper hardening syntax
debian/copyright: update to match Debian format
Change-Id: I9a89e7311c8632ae26ac2e6c02d1e427d94b1608
Related: OS#1694
There doesn't seem to be a reason why this shouldn't be in master.
The fairwaves/master branch is removing --march=native as well that
looks like a good idea as well.
Pau Espin
Alexander Couzens
Harald Welte