r4232: Major change in hos entries are removed from a TransactionTable.
>From now on, the only place were entries are actually removed is in TransactionTable::innerRemove.
Anywhere else, the remove methods just set a flag to tag the entry for later removal be innerRemove.
This allows us to survive situations where we try to touch transactions that have been removed already. We still log at the ERR level, but no more segfaults.
Updated all of the TransactionTable "find" methods to not return pointers to dead or removed tranactions.
Updated find-by-channel search to return the transaction entry with the highest transaction number, which fixes a bug that sometimes picked up the wrong transaction records during EA TCH assignment.
r4253: New exception class for when someone tries to use a "removed" transaction.
r4254: Updated copyright notice.
r4265: Unlock TransactionEntry::mLock while blocked on SIP message FIFOs in SIPEngine. This does wonders to reduce lock contention and make everything more snappy.
Use Mutex::tryLock in TransactionEntry::dead and if lock is held, assume that it is not dead. This also does a lot to reduce lock contention.
r4294: Change Um congestion response back to SIP 503.
r4295: When deleting an entry that has failed to respond to paging, send a SIP 480 response so the switch knows that transaction is dead.
r4412: Fixed bug that was causing SIPInterface to crash when the IMSI cannot be extracted from the To: header.
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@4497 19bc5d8c-e614-43d4-8b26-e1612bc8e597
This patch makes a step towards using a system-wide sqlite3 lib. It
moves sqlite3util.cpp/.h to CommonLibs and leaves only original
sqlite3 files in the sqlite3 dir of OpenBTS.
I do not claim any copyright over this change, as it's very basic.
Looking forward to see it merged into mainline.
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@4467 19bc5d8c-e614-43d4-8b26-e1612bc8e597
UHD accepts optional 'args' that can be used for device descriptions
such as IP address, device type, etc. Allow these to be passed in on
the transceiver command line as the third argument (number of supported
carriers is the second argument). This option benefits those who may
have multiple UHD devices attached to a single system.
This option is not yet supported by GSM core and requires starting the
transceiver independently on the command line. This option has no
effect when USRP1 is used.
Signed-off-by: Thomas Tsou <tom@tsou.cc>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@4315 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The appearance of underruns on B100 due to the latency transmit
window scares people. These should not be logged at ERROR level
because the events are generally not real errors. So use the same
behaviour of USRP1 of not logging these events. The presence of
underrun events can be determined by changes in the latency window
that is shown with log level set at INFO.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3988 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Allowing the underrun flag to reset will prevent a single event from
causing large jumps in the transmit latency threshold. This should
keep unreasonable timing latencies from occurring (e.g. latencies of
20+ frames).
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3981 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Put a floor on the transmit latency of the B100 in order to suppress
underruns in typical conditions. Empirical data from a handful of
relatively recent machines shows that the B100 will underrun when
the transmit threshold is reduced to a time of 6 and a half frames,
so we set a minimum 7 frame threshold.
The overall benefit should be marginal and may increase the
possibility of bursts arriving stale (after the trasmit deadline),
but will reduce the number of alarming UHD related messages that
appear in the log file.
This patch is UHD and B100 specific - USRP1 is unaffected.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3980 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Transmit gain setting would deceptively set the receive
gain instead. Since transmit attenuation is a combination
of RF gain and digital scaling, this major copy/paste bug
may have gone unnoticed by many users.
Reported-by: Robin Coxe <coxe@close-haul.com>
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3309 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The "Loss of monotonic time" error occurs when a timestamp
arrives from the device that is earlier in time than the
previous timestamp. The output is an ALERT level message
generally accompanied by a transmit side timeout from the
device.
UHD: Loss of monotonic time
UHD: Loss of monotonic time
UHD: Device send timed out
Add to the error description the timestamp values that
generated the error and output with ALERT rather than
ERR log.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3307 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Basically the unpack method and fillField method assume MSB-first bit packing. The unpack method calls fillField for each byte that needs to be unpacked. The problem occurs on its final call to fillField when it has a partial byte to unpack; it uses the LSB bits instead of the MSB bits.
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3288 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The failure "UHD make failed" implies that a suitable device
was found, but construction failed. Output the the found
target device information along with message.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3181 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Unrecoverable device errors include send and receive
timeouts and mangled packets. Other device errors, such
as non-monotonic timestamps are sometimes recoverable
through a soft restart.
These fatal are generally limited to development
versions of UHD driver or device firmware, but can occur
in release versions.
Alert user on such device errors along with current UHD
version.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3012 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Device errors regarding properties such as sample
rate or frequency tuning are almost always fatal and
lead to the common error "assuming TRX is dead".
Make sure that these errors are clearly presented to
the user.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2700 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Perform a UHD device search before constructing the object,
and inform the user if no device is found.
No device found is the most common reason for the transceiver
to fail with the dreaded error "assuming TRX is dead".
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2699 19bc5d8c-e614-43d4-8b26-e1612bc8e597
This configuration is invalid because of FPGA based timestamp
support for the USRP1 in the UHD driver.
Kindly inform the user to recompile with libusrp support from
GNU Radio.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2698 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Before setting the master clock rate, make sure that the
device is capable of being set. For now, assume that devices
that operate with default clock rates above 64 MHz,
specifically USRP2/N200/N210, cannot be set at 52 MHz.
Inform the user that these devices can be used with the
compile time option of host based resampling.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2697 19bc5d8c-e614-43d4-8b26-e1612bc8e597
It was possible to reach a state where a resampled burst would
overrun the transmit output buffer and corrupt the global
allocated signal vectors. The result was a segmentation fault
when attempting to access heap allocated signal vectors since
the pointers were garbage.
Whether the segfault occured or not appears to depend on the
memory location of the signal vector pointers, since it does
not occur on all systems.
Double buffer size to accomodate an incoming burst plus up to
a full chunk that may be remaining from the previous resampling
operation.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2691 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Not sure why this functionality is commented out.
Make install places the FPGA firmware image in:
/usr/local/share/usrp/rev2/
/usr/local/share/usrp/rev4/
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2690 19bc5d8c-e614-43d4-8b26-e1612bc8e597
With transceiver integration, the resampling filter files were
dropped. This created a working resampling implementation for
the USRP2 / N200, but with spectrum irregulaties that likely
caused issues at longer range operation. Simply reinsert the
filter files and modify the filter initialization to use them.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2689 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The following option selects single daughterboard use on
side A only. Otherwise, the default setting is TX on A and
Rx on B.
./configure --with-singledb
Other options are possible, as per the following enum, but
for simplicity with configure options, there are only two
choices.
enum dboardConfigType {
TXA_RXB,
TXB_RXA,
TXA_RXA,
TXB_RXB
};
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2687 19bc5d8c-e614-43d4-8b26-e1612bc8e597
External reference selection was already compile-time
determined by a hard coded value. Make it selectable
as a configure option.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2686 19bc5d8c-e614-43d4-8b26-e1612bc8e597
For network based devices (USRP2, N200, etc.), increase the
latency from 2 to 3 frames, which effectively buffers more
samples on the host in front of the Ethernet interface.
USB devices (USRP1 and B100) utilize an adaptive mechanism
so they are less effected by this value.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2685 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The low-level RadioDevice interface is agnostic to libusrp
or uhd based devices. 'make' allocates and returns a
pointer to a generic RadioDevice implemented for whatever
class of device determined at compile time.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2684 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Usage:
./configure --with-usrp1
Enable non-UHD USRP1 support through the gnuradio-based
driver. Requires gnuradio (libusrp) to be installed.
./configure --with-resample
Enable host-based 400ksps to 270.833ksps resampling.
Only supported for UHD devices. If not enabled, the GSM
sample rate is requested directly from the device.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2681 19bc5d8c-e614-43d4-8b26-e1612bc8e597
With the introduction of the B100, there is USB support
using UHD devices. The characteristics of the trasmit
side burst submissions are more reflective of the bus
type than the device or driver.
Use a fixed latency interval for network devices and the
adaptive underrun approach for USB devices - regardless
of driver or device type.
The GPMC based transport on the E100 appears unaffected
by either latency scheme, which defaults to network.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2677 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The resampling transceiver is unified with the 52MHz
version. The option to resample 400ksps from the device
to a GSM appropriate 270.833ksps is enabled at compile
time with the following option.
./configure --with-resamp
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2672 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The readSamples call does not return less than the
number of samples requested. Doing otherwise is a
fatal error. So on overruns, which are not fatal,
continue reading until the requested number of
samples is received.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2671 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Move push and pull of buffers into a dedicated file. This will
allow us to swap out resampling, non-resampling, and possibly
floating point device interfaces while presenting a single
floating point abstration in the interface itself.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2670 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Remove radio clock and vector interfaces into their own
files. This clears up and simplifies the radio interface
and, additionaly, prepares for a further split of the I/O
portion for optional resampler use.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2669 19bc5d8c-e614-43d4-8b26-e1612bc8e597
kurtis.heimerl