MNCC<->SIP bridge; attaches to OsmoMSC to interface with external SIP VoIP telephony
https://osmocom.org/projects/osmo-sip-conector
Pau Espin
d0a8fa9062
Since March 15th 2017, libosmocore API logging_vty_add_cmds() had its parameter removed (c65c5b4ea075ef6cef11fff9442ae0b15c1d6af7). However, definition in C file doesn't contain "(void)", which means number of parameters is undefined and thus compiler doesn't complain. Let's remove parameters from all callers before enforcing "(void)" on it. API osmo_stats_vty_add_cmds never had a param list but has seem problem (no "void"), so some users decided to pass a parameter to it. Change-Id: Ie519d4a4064a95803c33fd6969b53e1ef27045b7 Related: OS#4138 |
||
---|---|---|
contrib | ||
debian | ||
doc | ||
src | ||
tests | ||
.gitignore | ||
.gitreview | ||
COPYING | ||
Makefile.am | ||
README.asciidoc | ||
configure.ac | ||
git-version-gen | ||
osmoappdesc.py |
README.asciidoc
Osmo SIP Connector ================== Simple utility to map MNCC to SIP and SIP to MNCC. The VTY interface can be used to make configurations. The code doesn't have any RTP or transcoding support. Call identities can be either the MSISDN or the IMSI of the subscriber. Requirements of Equipment ^^^^^^^^^^^^^^^^^^^^^^^^^ * DTMF need to be sent using SIP INFO messages. DTMF in RTP is not supported. * BTS+PBX and SIP connector+PBX must be in the same network (UDP must be able to flow directly between these elements) * No handover support. * IP based BTS (e.g. Sysmocom sysmoBTS but no Siemens BS11) * No emergency calls Limitations ^^^^^^^^^^^ * PT of RTP needs to match the one used by the BTS. E.g. AMR needs to use the same PT as the BTS. This is because rtp_payload2 is not yet supported by the osmo-bts software. * AMR SDP file doesn't include the mode-set params and allowed codec modes. This needs to be configured in some way.