cellular-infrastructure
/
osmo-sip-connector
mirror of https://gerrit.osmocom.org/osmo-sip-connector
9
0
Fork 0
Code Issues Releases Wiki Activity
MNCC<->SIP bridge; attaches to OsmoMSC to interface with external SIP VoIP telephony https://osmocom.org/projects/osmo-sip-conector
134 Commits 27 Branches 15 Tags 1.8 MiB
C 86.7%
Shell 5.7%
M4 4.5%
Makefile 1.4%
Dockerfile 0.9%
Other 0.8%
Go to file
Daniel Willmann baa5d7bdad Fix mncc socket name 
For OpenBSC it made sense to have a /tmp/bsc_mncc file to share for
external MNCC, but now that we have an MSC osmo-sip-connector
communicates with that, so rename the socket file to avoid confusion.

Change-Id: I5e0dbf1aafe1b9c3776c49a08a76d64dd4fe9cc5
 		2018-10-05 13:49:31 +02:00
contrib Install systemd services with autotools 2018-09-10 16:09:56 +02:00
debian Install sample cfg file to /etc/osmocom 2018-09-12 20:29:17 +02:00
doc Fix mncc socket name 2018-10-05 13:49:31 +02:00
src Fix mncc socket name 2018-10-05 13:49:31 +02:00
tests distcheck/tests: Add the referenced osmoappdesc.py for testing 2016-04-24 22:28:35 +02:00
.gitignore Use release helper from libosmocore 2017-08-26 05:56:55 +00:00
.gitreview Add git review config 2017-08-25 18:38:05 +02:00
COPYING Initial commit for a MNCC to SIP gateway (and maybe auth GW too) 2016-03-21 09:54:37 +01:00
Makefile.am Install sample cfg file to /etc/osmocom 2018-09-12 20:29:17 +02:00
README.asciidoc Write down some of the limitations of the current setup 2016-03-26 16:31:00 +01:00
configure.ac Install sample cfg file to /etc/osmocom 2018-09-12 20:29:17 +02:00
git-version-gen Fix git-version-gen 2017-10-28 18:20:00 +02:00
osmoappdesc.py osmoappdesc: Fix VTY prompt to use OsmoSIPcon, not old OsmoMNCC 2018-03-27 15:51:02 +02:00

README.asciidoc 

Osmo SIP Connector
==================

Simple utility to map MNCC to SIP and SIP to MNCC. The VTY interface
can be used to make configurations. The code doesn't have any RTP or
transcoding support.

Call identities can be either the MSISDN or the IMSI of the subscriber.


Requirements of Equipment
^^^^^^^^^^^^^^^^^^^^^^^^^

* DTMF need to be sent using SIP INFO messages. DTMF in RTP is not
supported.

* BTS+PBX and SIP connector+PBX  must be in the same network (UDP must be
able to flow directly between these elements)

* No handover support.

* IP based BTS (e.g. Sysmocom sysmoBTS but no Siemens BS11)

* No emergency calls

Limitations
^^^^^^^^^^^

* PT of RTP needs to match the one used by the BTS. E.g. AMR needs to use
the same PT as the BTS. This is because rtp_payload2 is not yet supported
by the osmo-bts software.

* AMR SDP file doesn't include the mode-set params and allowed codec modes.
This needs to be configured in some way.