* explicit else clause rather than implicit
* don't continue processing if mandatory BVCI missing from message
Change-Id: I038576b91ae1ece149149d8663de7b8495d24e06
The switch clause was getting a bit too long/nested, let's add
a separate gbprox_rx_bvc_reset_from_bss() function.
Change-Id: If262566e275cca96035045d1194ce102c0942eb6
Both BSSGP messages appear from the SGSN in downlink on BVCI=0.
We must send a copy of this message to each of the BSS side NSEs.
Change-Id: Ia19791b143989eb1490f461d88b9edbd8e3b82be
Closes: OS#4875
We actually need to alter our compiler flags to avoid -Werror=trigraphs
creating trouble:
gb_proxy.c: In function ‘block_unblock_peer’:
gb_proxy.c:875:37: error: trigraph ??) ignored, use -trigraphs to enable [-Werror=trigraphs]
875 | LOGP(DGPRS, LOGL_ERROR, "BVC(%05u/??) Cannot find BSS\n",
|
Fixes: SYS#5233
Change-Id: I93296353dd964602699480faae1248096e331c6a
* use string representations instead of magic numbers whenever possible
* make text actually describe the specific case, rather than copy+paste
* proper order (foobar indication) not (indication ..... foobar)
Change-Id: I232038da26a9963763c5fc9051b87c9182b27d94
We want this level of indirection to support multiple BVCs per NSE. The
current code assumes that an NSE only has one BVC which breaks messages
on the signalling BVC which should only be sent once to an NSE
regardless of the number of BVCs it contains.
Change-Id: I97cc6c8f8c0f1b91577ab8f679c4ae217cc88076
Related: SYS#5226
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: I65f70a53b6982bff9ea4bd6ff786d8a2f8181eac
Fixes: OS#4865
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: I1cab4a716cf2fda6353f698888edbcec6228d78b
Fixes: OS#4865
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: I97559b29328101c7cf340aaf1052c0c406634065
Fixes: OS#4865
This will be needed to use the TLLI as link selector parameter
in osmo-gbproxy in an upcoming patch.
Depends: libosmocore.git I397b32a6e6ea3e9d218446138cceafa9b27685dd
Change-Id: Ia6d5300e63ad23987cbdca824db620305bd583d7
When we receive a PAGING for PS or CS with destination to the entire
BSS area, we need to iterate over all peers and send one copy of the
paging to each of them.
Change-Id: Iecf244238500a354d5a5b40c76f0c0bb8f8c2511
There may very well be many PCUs connected within the same RAC or LAC.
This means we'll need to iterate the list of peers and dispatch it to
each matching peer.
Change-Id: I2c44959661fb53730586f4347cbfbbcece065e13
Commit cce88282388f in libosmocore changed the msg ownership model - the
callback that the user registers is now responsible for freeing the msg.
Change-Id: Iee940aba7d94afefb5957dbe5f0b04dcf951b31c
Related: SYS#4998
* is_config_node is deprecated, so don't set it
* go_parent_cb is only used if we want to do special stuff upon exiting
a node, in osmo-sgsn and gtphub only osmo_ss7_vty_go_parent() needs to
be called
Change-Id: I2008dd9026922d29ee703c59e70d3fecced0ee18
Currently the code reports routing the message to a BVCI but never even
tries to get the peer for it.
Change-Id: Ic72f0f03e5886ab76404915fc60a2796e6881a7a
Related: SYS#4998
When we receive a signalling BVC RESET from the SGSN we want to reset
the signalling BVCs for every peer.
Change-Id: I98c1a53d0e4b9a988e9ddec97ce0c67ded6f6326
Related: SYS#4998
Since NS2 has a different abstraction we mock up the prim send/recv
functions and don't test NS like the old tests did.
Related: SYS#4998
Change-Id: Iecfd0408a35a11638d254c1db3c1d477b1a11524
sgsn_delete_pdp_ctx() should never be called without checking if the GTP
side is available, since it may happen that it has already been released
by the time the mmctx tells us the pdp ctx is gone on the MS side.
Fixes: OS#4817
Change-Id: Ie618874545172ec98355174a2ee041fc4a8bec16
This function is only expected to be called if the GTP side of the PDP
ctx is still alive, since it will tear down the GTP side and then finish
the pending MS side if needed.
The asserts are added to ease debugging since it was noted that a few
callers were using this function without properly checking the status of
the pdp ctx.
Related: OS#4817
Change-Id: I4248e2e9846fec5ae2c8557384da2deb86668c50
The SGSN initialises GTP with gtp_statedir of "./" which may
not be the desired path for writing the gsn_restart file.
When starting from systemd for example, we might write
to the system root.
This patch allows override via the config file.
Closes: OS#4820
Change-Id: Ib3ffb7fd6ea1d9b0286111d8c2cba9da5394ca58
Scenario:
1- For an unknwon reason, sgsn sends DeletePdpCtxReq on GTP towards GGSN.
2- GGSN answers with Error Indication to that pdp ctx which calls
gtp_freepdp()
3- gtp_freepdp() calls libgtp callback cb_delete_context() before freeing the
pointer, in osmo-sgsn callback points to cb_delete_context(), which
removes pctx->ggsn and tries to drop the pdp on the NS side by sending a
DeactPdpReq.
4- While waiting for DeactPdpAck, the MS/PCU sends a DeactPdpReq, and
code was unconditionalyl trying to release the gtp side without checking
if it was alreay released, using pctx->ggsn==NULL and crashing.
This is basically the same logic already in place in regular path
gsm48_rx_gsm_deact_pdp_ack.
Related: OS#4817
Change-Id: I02587a3dc812823d893fc00b904142b75fd190b9
gtphub.c:2915:2: error: ‘snprintf’ argument 4 may overlap destination object ‘buf’ [-Werror=restrict]
2915 | snprintf(pos, len, " port %s", portbuf);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Be better safe and use the stack instead of byte counting in the buffer.
Change-Id: Ied9665ce6bd2633797bbc3a2171e911ada357a22
When compression is turned on, an extra buffer "expnd" is allocated in
the context of msg. This means that when msg is freed, expnd is freed as
well and there is no need for freein it explcicitly, which, when it is
done after freeng msg, causes talloc to abort.
Change-Id: I8959b75e241ffabf9fa34c4cf014721584372b26
3GPP TS 24.008 Section 10.5.7.2 Radio Priority states that the Radio Priority IE is
3 bits as follows:
--------------------------------------------
0 0 1 priority level 1 (highest)
0 1 0 priority level 2
0 1 1 priority level 3
1 0 0 priority level 4 (lowest)
All other values are interpreted as priority
level 4 by this version of the protocol.
--------------------------------------------
However at least the MediaTek MT6753 and MT6592 have been
observed to interpret a value of 0 0 0 in an undetermined way
resulting in lack of access to RACH in the cell.
Fixes: OS#4506
Change-Id: I810cd541eb5764ee3f2c238bcd3a10836228d0b5
As long the SGSN doesn't support PS handover treat unknown RA as invalid
and do an implicit detach.
Fixes ttcn3 crash when an RAU happen within an Attach Request
Change-Id: I6a0b335d51f58c26349f7e0a62b2107d7d351d07
"127.0.0.1" is changed to "localhost" to let local NSS decide whether to
use IPv4 or IPv6. In newish systems, IPv6 ::1 will be selected since
IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail. In any case, since
the default remote address is a local one and it's the client side,
there's no real logical change since the kernel would anyway should have
taken a local address anyway.
Change-Id: I2f599e1aa449d44136ef20ba5f516ca9b61f3223
3GPP TS 48.018 Section 8.4:
> After any failure affecting the NSE, the party (BSS or SGSN) where
> the failure resided shall reset the signalling BVC. After sending or
> receiving a BVC-RESET PDU for the signalling BVC, the BSS shall stop all
> traffic and initiate the BVC-RESET procedure for all BVCs corresponding
> to PTP functional entities of the underlying network service entity. The
> BSS must complete the BVC-RESET procedure for signalling BVC before
> starting PTP BVC-RESET procedures.
TODO: We should not just trigger a single outbound BVC-RESET message,
but we should re-transmit them until we get a response. This would
likely entail adding FSMs to libosmogb, which we will leave for a later
point - it's anticipated that the NS + BSSGP code is undergoing quite
some changes in the coming months anyway, so leave it for then.
Change-Id: I0b46035b40709c38bb9ab9493c11031a577e3ee0
Closes: OS#4629
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
The osmo_ prefix should be only used for official struct/apis of libosmocore.
This commit was done via `sed -i 's/osmo_sockaddr/sgsn_sockaddr/g'`.
In prepartion of introducing a different api of osmo_sockaddr to
libosmocore.
Change-Id: Ibb1ddce9ff1ffe7494de5cdb8ea1843c45fe4566
The MS notifies movement to GMM SUSPEND state because it is for instance
handling a call and cannot use PDCH anymore. Once it releases the TCH it
will ASAP move to either dedicated mode or trigger RAU, which means it
will get out of SUSPEND state. So it doesn't make sense to try paging
the MS when in that state.
This change makes test TC_suspend_nopaging pass.
Related: OS#4616
Change-Id: Ia245899eb9f16c7f839785def4ceb721a1c3a11b
We so far only resumed from suspend upon receiving an explicit BSSGP
RESUME message from the BSS. The latter is only possible in
BSC-colocated PCU, where the BSC can trigger the message when releasing
the dedicated channel. In BTS-colocated PCUs, this is not possible,
and we have to rely on the MS resuming by RAU.
See 3GPP TS 23.060 section 16.2.1.1.1 clause 6:
The MS shall resume GPRS services by sending a Routeing Area Update Request message to the SGSN:
* if the BSS did not successfully request the SGSN to resume GPRS services,
* if the RR Channel Release message was not received before the MS left dedicated mode,
* if the MS locally determines that the conditions for the GPRS suspension have disappeared
Without this patch, the GMM state would forever be stuck in SUSPEND,
which in turn causes the SGSN to page the MS all the time.
Change-Id: I3c09187a27483d95fa0070bbb467f94a2ea3978f
Related: OS4616
As msgb ownership is not passed along, we need to free the message
buffer memory we allocate in defrag_segments() after calling
sgsn_rx_sndcp_ud_ind().
Change-Id: I1185b1aa99bb167d616eb469e5445e4ed5ad949d
Closes: OS#4603
At 36c3, osmo-hlr was run with a patch that records the RAN type of attached
subscribers. Even though this is not in osmo-hlr master, it is nice information
to send along.
Change-Id: I5dbe610738aed7ea1edf6b33543b1c03818cc274
This caused frequent crashes at 36c3. The "proper" fix is probably elsewhere
(lynxis mentions an unfinished patch), but at least this prevented some crashes
during active operation.
Once this is merged, we can (re)enable SGSN_Tests_Iu.TC_geran_attach_iu_rau,
which tests exactly for this scenario: A Subscriber / MM context that is so
far attached via GERAN, but now receives a RAU via UTRAN/Iu.
Closes: OS#4339
Change-Id: Ifde15dc4151d84748f0e67b32c9c260cb2d9d8fc
New define is available since libosmocore 1.1.0, and we already require
1.2.0, so no need to update dependenices.
Let's change it to avoid people re-using old BSC_FD_* symbols when
copy-pasting somewhere else.
Change-Id: Iaebd049e383b02204a12f39cc6c932a53d25fd72
The N201 values are negotiated per SAPI, and there are default values
per each SAPI. Let's use those rather than hard-coded values.
Closes: OS#3954
Change-Id: I447a3c6dd85311772a6e219c62dc820d2726857f
Otherwise lower layers will end up using a TLLI from PTMSI which was not
yet announced to the MS if it is still not in GMM attached state, as
showcased by SGSN_Tests.TC_attach_req_id_req_ra_update.
Related: OS#3957, OS#4245
Change-Id: Ide51726abb82f5784eca4ab8d62b2ad8512be843
Output:
20191107021548500 DMM <0002> gprs_gb.c:40 MM_STATE_Gb(2596296189)[0x6120000084a0]{Idle}: Received Event E_MM_PDU_RECEPTION
20191107021548500 DMM <0002> gprs_gmm.c:1531 MM(/d4b6d7af) -> GMM RA UPDATE REQUEST type="RA updating"
20191107021548501 DMM <0002> gprs_gmm.c:1615 MM(/d4b6d7af) The MM context cannot be used, RA: 901-70-2758-208
Assert failed mmctx->gb.llme == NULL gprs_gmm.c:1620
Scenario reproducing the crash can be triggered with TTCN3
SGSN_Tests.TC_attach_req_id_req_ra_update.
Basically, SGSN first receives an ATTACH REQ with a given RA ID, then
SGSN switches to state CommonProcedureInitiated and sends GMM ID REQ,
and MS/PCU answers immediatelly with a RA Update instead with a new RA
ID.
Related: OS#3957, OS#4245
Change-Id: I64fa5cf1b427d3abb99e553e584897261a827ce6
Since osmo-ggsn.git c94837c6a401bf0f80791b619a9b4cfbe9160afd, those
APIs are a no-op since timers are tracked internally through osmocom
APIs (and at the same time, new implementation fixes some timing related
bugs).
As a result, osmo-sgsn depends now on at least that libgtp commit. Since
it's not yet avaiable on latest libgtp release, let's track it down in
TODO-RELESE to not forget to update libgtp requirements during osmo-sgsn
release.
Related: OS#4178
Change-Id: Ia9a93d4a6ed63cd0c736f9a99d81d730b958d82e
When the MS is in MM_STANDBY, the Routing Area is known,
but not the exact cell.
Start the paging procedure. (Even this is only supported
for the last known cell, not the Routing Area. Routing Area
paging is not yet supported.)
Change-Id: Icc2c6ba70f8f74054546a1e31741fc90b232a23c
GCC warns us that 'pmm_state_fsm_timer_cb' is defined but not used.
This function was introduced in [1], but was not assigned to the FSM.
[1] I66c2ac0350cb074aefd9a22c5121acf723f239d3
Change-Id: Ib040befc87b2676aad2b8fe3671404fb3f5b030b
When the SGSN releases a RANAP connection, it sends a Release Command
and waits for a Release Complete. Use X1001 to release the Iu connection
when the Release Complete is lost/never received.
Change-Id: I39a0169c22a4ac430b3d6f3c281d1f381eaa4756
When moving between RANs we need them at a later point.
Allocate them always to not make the code (more) complex.
Change-Id: I1724790335b0820f153a0cbdb5cfd1cfea36d1e9
After processing the event, set the return code to success.
Thanks to manatails (redmine).
Change-Id: I73b3b3c3dd330bc953835737758854cf68539495
Fixes: #3969
In IDLE there is not further context with the MS. Prevents the Timer from sending
packages to a MS which can not respond
Change-Id: Ibdd913173af11d0e6d04aa392e047d5d9aee1243
The user inactivity timer is similiar to the Gb READY timer and reduces
the resources taken by an idle UE.
Change-Id: I66c2ac0350cb074aefd9a22c5121acf723f239d3
PMM Connected defines a Iu signaling connection. The 2 other
PMM states do not have an active Iu signaling connection.
Change-Id: Ie05d2bdf8dfb593b4c7e837107a3a06f22e90119
When receiving a PDU, the GMM fsm will change to state MM_READY
and will re-arm the T3314
Relates: OS#1941
Change-Id: I78f40762fb17bbd4a6f35608a793f8e5271e9b86
After Security Mode Complete, the sender has been authenticated.
Send a CommonId to enable paging coordination between CS and PS.
Change-Id: If195c26e87ba3054e159746671babf93a12e7013
It could happen that SGSN drops GTP side of a pdp ctx (pdp->lib=NULL)
while still maintaing the other side (to notify about the entire pdp ctx
being torn down). If a PdpActReq arrives during that time, we need to
account for that situation, otherwise osmo-sgsn crashes accessing
pdp->lib.
If no pdp->lib is found at that time, let's reject the request and
expect at some point later in time the entire pdp context will be
destroyed and reestablished.
Related: OS#4173
Change-Id: I6dd87557ebb26fdbd280504abde10d976acecf64
State machine inspired in the one from TS 24.008 4.1.3.3.1. Some state
transitions are inroduced in the code but are still commented out since
we lack some functionalitites or improvements in the code to handle
different scenarios.
Most of the logic is still outside of the FSM, but at least now the
states are handled in a sane way triggered by events.
Change-Id: Idecb43c10d66224d4f9ba9320825040ce6cf9a07
Build files shared by osmo-sgsn, osmo-gbpy and osmo-gtphub into a .la
library, so we can later split each application into its own subdir and
clearly identify what's used by who.
Due to a dependency error with .Po files, I cannot depend on the specific
.o files directly in LDADD for each binary, but it works fine on follow up
commits when binaries are splitted into different makefiles, so it will be
done later.
Change-Id: Ib7665c530c086a5f3135c395bb8bf19ed4a882b6
Implement TS 23.060 6.1.2 Mobility Management States (Iu mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I4c9cf8c27194817c56e8949af0205e1cc14af317
Implement TS 23.060 6.1.1 Mobility Management States (A/Gb mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I04004423e993107374d5a3549b8a93ac169251dd
INET(6)_ADDRSTRLEN already contains the required extra null byte at the
end, no need to add +1 to it.
Change-Id: I5a16659e007c6883fe21582cce5dac544e6d4bb9
inet_ntop manual states:
"inet_ntoa(3) is now considered to be deprecated in favor of
inet_ntop()".
Change-Id: I0c708d047122f349acf46797a9e5973040e7ae04
This way it's easier to add new common functionalitites without
forgetting to add it on both sides, and simplifies the code.
Change-Id: Ib6c0427ac7b35295cf1caf2f28cb2a5c155b9d9c
Those two state sets are not part of the same state machine, and are
used in different scenarios, so let's split them and handle them in Gb
and Iu specific parts of struct sgsn_mm_ctx. This is required in order
to improve related code (for instance, use osmocom fsm).
Change-Id: I6100d607da316da0595886c6968704dd9ccfbde9
Now that we have RANAP/Iu handling specificities in its own file, let's
have also Gb specific glue code for messages coming from llc up to MM/SM
layer in its own file. This way same entry points in gprs_gmm.c are used
by Gb and Iu: gsm0408_rcv_gmm() (for MM) and gsm0408_rcv_gsm() (for SM).
Change-Id: Iaf57922a0970c1d03f6f1d6337d27ae3d4aaf32c
RANAP related functionalities were splitted among several files
(gprs_gmm.c, gprs_sgsn.c and sgsn_libgtp.c). Let's move it into its own
file to shrink complexity/size of existing files.
It also allows to keep a lot of conditionally enabled code (BUILD_IU)
and its dependencies (osmo-iuh) together.
Change-Id: I549042aaff045a378de77d657cc396ee08f22f33
There's no real need to use -1 to indicate echo timer as disabled, since
0 can also be used (it doesn't make sense to have a timer timeout of 0).
This way code is simplified.
Change-Id: I689034887188a53590eddeffda781629694eb5ed
When a MS MM state is READY its exact location is known (PCU).
On Gb, T3314 (aka TS 23.060 "READY timer") sets the MM state from
READY to STANDBY, where only the RA is known.
Introduce a second set of timer variables, because state timer
can run while another packet state timer is timing out.
Related: OS#1941
Change-Id: I4ce23ebe50d141076c20c9c56990b7103cd25e55
FSM doesn't expect receiving event names containing spaces (log lines
generated are confusing).
Similar for enums, it's better using code names to match easily and make
log lines more clear.
Change-Id: I16ede8bf8352b09bc772fd7b43fad2c2274b3ec1
For new readers it's very confusing why PMM states and MM states are in
the same enum, but handled with different functions, and sometimes
called one right after the other with different enums. Calling them when
on a different ran_type makes the function early return, so let's better
conditionally call the function to make it clear in the flow when the
function is expected to do something.
Change-Id: I65ad9e180177bc9fc7c4a037cd85cfe33b161f73
Implementation of osmo_sccp_simple_client() API internally uses ss7 id
1, which is confusing since there's no 0 in use in osmo-sgsn. Let's
explicitly use the 0 one so it is configured by "cs7 instance 0" in the
VTY.
Related: OS#4157
Change-Id: I0e23a6a76ebcba0b1b424e3d3b20d06c1da44cbe
This may well be the culprit of OS#3957, were already freed llme is accessed from
mmctx context later on, upon some timer is triggered in mmctx.
Related: OS#3957
Change-Id: I8e1eaeb9b3ebee8e45704b4fe007190c7db609e4
Recent commit added an assert to make sure unexpected conditions were
happening in sgsn_mm_ctx_cleanup_free(). Old code was passing
mm->gb.tlli to gprs_llgmm_assign with "new tlli" being all-1's (aka
unassign mm->gb.tlli).
The commit changed the code to use gprs_llgmm_unassign, which uses
llme->tlli instead of mm->gb.tlli, and the assert was used to make sure
no behavior change occured with the commit.
It seems TTCN3 test TC_attach_auth_id_timeout triggers that assert, and
after closer debug it seems mm->gb.tlli == llme->old_tlli, which makes
sense since there's a mm->gb.tlli_new which is expected to be
llme->tlli.
When TLLI changes in GMM (Attach Request or RA Update), it is stored
into mm->gb.tlli_new and assigned on the LLC layer using gprs_llgm_assign(),
and upon completion signalling from MS, (after handling response to initial request)
it is assigned to mm->gb.tlli (and value kept in mm->gb.tlli_new).
So mm->gb.tlli and mm->gb.tlli_new usually contain the same value unless
a new TLLI is allocated, and during the span of
Request->Response->Complete it is kept different, the LLC layer having assigned
the value of mm->gb.tlli_new.
So, old code (before the commit adding the assert) was wrongly using
mm->gb.tlli instead of mm->gb.tlli_new at the moment of unassigning (but
not really problematic in practice since behavior is the same as long as
"old TLLI" value is not all-1's.
So we are fine and correct using gprs_llgm_unassign() (which passes llme->tlli
as "old TLLI") instead of what used to be done before.
In any case, the expected behavior is to free the llme object and get
rid of everything...
Fixes: 788863cda5
Change-Id: I482acdbdf05ce0cb0a5804206672512854067f5b
TS 04.64 sec 7.2.1.1 LLGMM-ASSIGN specifies:
"""
If TLLI Old all 1's and TLLI New all 1's then TLLI Old and TLLI New are assigned, and TLLI New shall
be used when (re-)transmitting LLC frames. Both TLLI Old and TLLI New shall be accepted when received
from the peer. It shall be treated as a TLLI change according to subclause 8.3.2.
"""
Change-Id: I3a17715bf2dba7b03c1335ad106307eb4d5f564a
May be useful to detect unexpected conditions which could end up in
memory leaks.
Related: OS#3957
Change-Id: I0d175501083ce458ff1c07ad38761d2cbf4ea470
Since March 15th 2017, libosmocore API logging_vty_add_cmds() had its
parameter removed (c65c5b4ea075ef6cef11fff9442ae0b15c1d6af7). However,
definition in C file doesn't contain "(void)", which means number of
parameters is undefined and thus compiler doesn't complain. Let's remove
parameters from all callers before enforcing "(void)" on it.
API osmo_stats_vty_add_cmds never had a param list but has seem problem
(no "void"), so some users decided to pass a parameter to it.
Change-Id: Ic4af704958819e6f65ac01be33ef5b3d69628ad0
Related: OS#4138
osmo-sgsn was missing the help text of the -V option
gb_proxy still thought of itself as OpenBSC
Omit the name of the program in the help text to avoid such issues in
the future.
Related: OS#1720
Change-Id: Ib57694b6bff7c98a269dc4b4dbb7173349a57b81
GCC 9 complains that variable 'gsm_cause' in do_act_pdp_req() may
be uninitialized. This may happen if sgsn_mm_ctx_find_ggsn_ctx()
would return NULL due to no static GGSN configured.
Change-Id: I09c608045dd35b9898b82e236a306ab9a6c2c0b9
Previous commit introduced command "authentication (optional|required)",
which is only meaningful if auth-policy is remote. Upon adding the cmd,
it changed the default logic for remote policy to not require
authentication, which broke TTCN3 tests because sgsn no longer tries to
authenticate the users.
Since it's actually good to enable authentication by default where
possible, let's enable it by default when on auth-policy remote.
In order to do so, let's simply not care about the value of variable
require_authentication if auth_policy is not REMOTE. As a result, we
drop parts of the previous patch and remove unneeded checks (which are
only partially useful based on order of commands during VTY read).
Fixes: 794f446a28
Change-Id: Ic707a95af178b44f08809df3d3bc8354bf34273c
It may be useful to have 'remote' authorization policy, but do not
require authentication in GERAN at the same time, e.g. in combination
with 'subscriber-create-on-demand' feature of OsmoHLR.
This change introduces a new VTY parameter similar to the one
that we already have in OsmoMSC:
authentication (optional|required)
Please note that 'required' only applies if 'auth-policy' is 'remote'.
Change-Id: I9909145e7e0af587c28827e16301a61b13eedaa9
Commit 176a4d2f33 moved echo timer related
code to its own function but did some mistakes when moving the logic
from several places into its own function. As a result, echo timer was
only enabled after the 2nd pdp ctx was created, instead of the expected
1st.
First, let's be consistent and always call the function *after* changing
state, since that's what the function expects. This fixes the issue.
Finally make the logic in the function more intuitive by checking in the
if clause the only case where actually the echo timer should be enabled:
Only if policy specifies so and we have at least 1 pdp ctx against that ggsn.
Fixes: 176a4d2f33
Change-Id: I826030978edb61ea5a172c2b72f63758206a6246
In I73fd54ad3a4ab8be5aff0fee5c722597ad766e9d incorrect fix was added
which only initialize first element of array. Fix this by using explicit
index to initialize entire array.
Change-Id: I26e4aa44f159d1b5b91dda4a586fd4e809711245
Look at PDP Context Status IE: if there are any PDP contexts which are
ACTIVE on MS side and there are no PDP contexts which are ACTIVE on the
network side, then send Service Reject with the cause "NO PDP
ACTIVATED". This forces MS to reactivate the PDP contexts.
3GPP TS 24.008 Section 4.7.13.4 Service request procedure not accepted
by the network. Cause # 40.
Fixes: OS#3937
Change-Id: If610cbef17c25ec44e65d4f1b2340d102c560437
After Activate PDP Context request, Motorola KRZR
sends a zero length XID-Field of Type L3 Parameters
If this is not echoed back, the phone will send
Deactivate PDP Context request with SM Cause:
LLC or SNDCP failure(A/Gb only) (25)
Closes: OS#3426
Change-Id: Ibd75f7b943c84ed7264481fa2e4bc3cb2f6745d4
gprs_sndcp_dcomp_term asserts if compclass is not
SNDCP_XID_DATA_COMPRESSION, so this way by checking in the caller too we
easily now if the unexpected value is in compclass or in algo.dcomp.
Change-Id: I4600e6a137f42f20fdf69637e4a9048b265c1748
Harald Welte
Daniel Willmann
Pau Espin
Alexander Couzens
Keith Whyte
Philipp Maier
Eric Wild