This allows further shrinking of gprs_sgsn.{c,h} and also being able to
use GSM_APN_LENGTH on different headers easily (needed by follow-up
patch).
Change-Id: Id225ed8b84e1376f4a30f17dd4b153b6b1a6efa8
Rework initialization and destruction of several sgsn subsystems to be
allocated & released together with the struct sgsn_instance.
This makes it easier to destroy and recreate the entire context and
allows us to start moving global variables scattered around to be under
struct sgsn_instance.
Change-Id: Idf60519b8e475b94d38bbb69e737132a5afaefab
Similar to what we already have for struct sgsn_mme_ctx in
gtp_mme.{c,h}.
This is just the nth step of properly splitting different
protocol layers, data model, etc.
Change-Id: Iad1895f09e43e299df7bb126bf52fdb98268392e
All remaining code in that file is NS protocol related, hence let's
rename it so that we end up with one file per protocol in the Gb stack.
Change-Id: I8312c8a70d60cab48764950c5b57ca02964e9db2
Right now there's no much code there since the related code is totally
entangled with the LLC one.
This will eventually change in the future when we switch to use
libosmo-gprs.
Hence, this commit is a preparation to have already some place to put
new BSSGP specific code in the future.
Change-Id: I816396ab5ccb86032bbc21b41a959934a7768780
That big file is really only used by tests/sgsn/sgsn_test nowadays, so
let's keep it out of osmo-sgsn app code base.
Change-Id: Ia5a639832f52b2f015a2800bd0d94a28d7bc689b
When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: I8118ee3d3da9bdcd0c691471ef91b95dba21004a
MMEs connect over Gn interface using GTPCv1 towards the SGSN in order to
exchange RIM PDUs by using "RAN Information Relay" GTPCv1 message type.
For more info, see 3GPP TS 29.060 sec 7.5.14.1 "RAN Information Relay"
In order to support it, this commit does the following:
* Uses new libgtp APIs to rx and tx RAN Information Relay messages. The
same "gsn" object is reused, ie. the local GTPCv1 socket address used
for exchanging messages against GGSN is reused.
* Adds a new "sgsn_mme_ctx" struct holding information about MMEs
allowed by the SGSN, each one containing information about the GTP
address it uses, the in/out routing based on TAI requests, etc. The
set of MMEs and their config can be set up using new VTY node introduced
in this commit.
* The RIM related code in SGSN is refactored to allow forwarding from
and to several types of addresses/interfaces.
Depends: osmo-ggsn.git Change-Id Iea3eb032ccd4aed5187baca7f7719349d76039d4
Depends: libosmocore.git Change-Id I534db7d8bc5ceb19a2a6866f07d5f5c70e456c5c
Related: SYS#5314
Change-Id: I396450b8d8b66595dab8ff7bf41cbf964bb40d93
State machine inspired in the one from TS 24.008 4.1.3.3.1. Some state
transitions are inroduced in the code but are still commented out since
we lack some functionalitites or improvements in the code to handle
different scenarios.
Most of the logic is still outside of the FSM, but at least now the
states are handled in a sane way triggered by events.
Change-Id: Idecb43c10d66224d4f9ba9320825040ce6cf9a07
Implement TS 23.060 6.1.2 Mobility Management States (Iu mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I4c9cf8c27194817c56e8949af0205e1cc14af317
Implement TS 23.060 6.1.1 Mobility Management States (A/Gb mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I04004423e993107374d5a3549b8a93ac169251dd
Now that we have RANAP/Iu handling specificities in its own file, let's
have also Gb specific glue code for messages coming from llc up to MM/SM
layer in its own file. This way same entry points in gprs_gmm.c are used
by Gb and Iu: gsm0408_rcv_gmm() (for MM) and gsm0408_rcv_gsm() (for SM).
Change-Id: Iaf57922a0970c1d03f6f1d6337d27ae3d4aaf32c
RANAP related functionalities were splitted among several files
(gprs_gmm.c, gprs_sgsn.c and sgsn_libgtp.c). Let's move it into its own
file to shrink complexity/size of existing files.
It also allows to keep a lot of conditionally enabled code (BUILD_IU)
and its dependencies (osmo-iuh) together.
Change-Id: I549042aaff045a378de77d657cc396ee08f22f33
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-sgsn and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
The old GMM Attach Request handling used a recursive function
which can not handle certain states and is quite complex and hard to
extend.
The new FSM handles such request in a FSM and can be called multiple
times.
Change-Id: I58b9c17be9776a03bb2a5b21e99135cfefc8c912
libosmogsm in libosmocore.git from Change-Id
Ie36729996abd30b84d1c30a09f62ebc6a9794950 onwards contains oap_client.c,
so we don't need our local copy here in this repo anymore.
Change-Id: I7b194f98ef3f925b6178d8a8dbd9fcf2f0c6e132
Requires: libosmocore.git Change-Id Ie36729996abd30b84d1c30a09f62ebc6a9794950
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
The libosmocore version requirements are fine already but for jenkins
tests to pass we have to have Ic77866ce65acf524b768882c751a4f9c0635740b
merged into libosmocore master.
Related: OS#1694
Change-Id: I2b687b7f07ef05bbd861b8479cad5a958a3dde92
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Pau Espin
Vadim Yanitskiy
Alexander Couzens
Harald Welte
Neels Hofmeyr