Add vty 'encryption uea 0 1 2', defaults to 'encryption uea 0' to yield
previous behavior.
If any UEA above 0 is enabled, include the UEA key in the Iu Security
Mode Command.
I noticed that only the code bit in st_iu_security_cmd_on_enter()
affects the test. The same code in gsm48_gmm_authorize() seems to be
dead code? But applying the patch there as well just to be safe.
We cannot yet verify the chosen UEA to match a configured UEA level,
because the iu_client.c does not send us message details with the
RANAP_IU_EVENT_SECURITY_MODE_COMPLETE.
Also we cannot yet send the set of configured UEA to the hNodeB, since,
again, iu_client.c does not provide the proper API for it.
The proper solution here is to completely dissolve iu_client.c and do
all Iu handling in osmo-sgsn itself -- see OS#5487.
Related: SYS#5516
Related: I1a7c3b156830058c43f15f55883ea301d2d01d5f (osmo-ttcn3-hacks)
Change-Id: I27e8e0078c45426bf227bb44aac82a4875d18d0f
will add uea_encryption_mask, and find that the name
'cipher_support_mask' is not concise enough.
Related: SYS#5516
Change-Id: Ie8d4a0534c5b751f698bce425427bb1d28ddea31
MMEs connect over Gn interface using GTPCv1 towards the SGSN in order to
exchange RIM PDUs by using "RAN Information Relay" GTPCv1 message type.
For more info, see 3GPP TS 29.060 sec 7.5.14.1 "RAN Information Relay"
In order to support it, this commit does the following:
* Uses new libgtp APIs to rx and tx RAN Information Relay messages. The
same "gsn" object is reused, ie. the local GTPCv1 socket address used
for exchanging messages against GGSN is reused.
* Adds a new "sgsn_mme_ctx" struct holding information about MMEs
allowed by the SGSN, each one containing information about the GTP
address it uses, the in/out routing based on TAI requests, etc. The
set of MMEs and their config can be set up using new VTY node introduced
in this commit.
* The RIM related code in SGSN is refactored to allow forwarding from
and to several types of addresses/interfaces.
Depends: osmo-ggsn.git Change-Id Iea3eb032ccd4aed5187baca7f7719349d76039d4
Depends: libosmocore.git Change-Id I534db7d8bc5ceb19a2a6866f07d5f5c70e456c5c
Related: SYS#5314
Change-Id: I396450b8d8b66595dab8ff7bf41cbf964bb40d93
The new NS2 api supports NSE with multiple NS-VC and contains a NS-VC
fsm. FR/GRE support is not working.
The configuration is compatible except for FR/GRE.
Relates: OS#4629
Depends-on: Iaad7b53d44338e5dd81dc2202f23bdcb715af804 (libosmocore)
Depends-on: I6cef42749555e577d5573f2ed8b8bce4cf842a98 (libosmocore)
Change-Id: I92a3bcaf166b091a22d74c7c1586964d33d7cc9d
Since osmo-ggsn.git c94837c6a401bf0f80791b619a9b4cfbe9160afd, those
APIs are a no-op since timers are tracked internally through osmocom
APIs (and at the same time, new implementation fixes some timing related
bugs).
As a result, osmo-sgsn depends now on at least that libgtp commit. Since
it's not yet avaiable on latest libgtp release, let's track it down in
TODO-RELESE to not forget to update libgtp requirements during osmo-sgsn
release.
Related: OS#4178
Change-Id: Ia9a93d4a6ed63cd0c736f9a99d81d730b958d82e
RANAP related functionalities were splitted among several files
(gprs_gmm.c, gprs_sgsn.c and sgsn_libgtp.c). Let's move it into its own
file to shrink complexity/size of existing files.
It also allows to keep a lot of conditionally enabled code (BUILD_IU)
and its dependencies (osmo-iuh) together.
Change-Id: I549042aaff045a378de77d657cc396ee08f22f33
Previous commit introduced command "authentication (optional|required)",
which is only meaningful if auth-policy is remote. Upon adding the cmd,
it changed the default logic for remote policy to not require
authentication, which broke TTCN3 tests because sgsn no longer tries to
authenticate the users.
Since it's actually good to enable authentication by default where
possible, let's enable it by default when on auth-policy remote.
In order to do so, let's simply not care about the value of variable
require_authentication if auth_policy is not REMOTE. As a result, we
drop parts of the previous patch and remove unneeded checks (which are
only partially useful based on order of commands during VTY read).
Fixes: 794f446a28
Change-Id: Ic707a95af178b44f08809df3d3bc8354bf34273c
Add a 'gsup ipa-name' VTY command which overrides the default
IPA name used by the SGSN on the GSUP link towards the HLR.
This is required for GSUP routing in multi-SGSN networks.
The 'gsup ipa-name' option can only be set via the config file
because changing the IPA name at run-time conflicts with active
GSUP connections and routes configured in the HLR. The osmo-sgsn
program must be restarted if its IPA name needs to change.
Related: OS#3356
Change-Id: Ib2f65fed9f56b9718e8a9647e3f01dce69870c1f
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-sgsn and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
libosmogsm in libosmocore.git from Change-Id
Ie36729996abd30b84d1c30a09f62ebc6a9794950 onwards contains oap_client.c,
so we don't need our local copy here in this repo anymore.
Change-Id: I7b194f98ef3f925b6178d8a8dbd9fcf2f0c6e132
Requires: libosmocore.git Change-Id Ie36729996abd30b84d1c30a09f62ebc6a9794950
Before this commit, echo req/rsp logic was implemented in libgtp but
never used in osmo-sgsn.
This commit adds a timer which periodically sends a GTP ECHO Request to
every GGSN if there's at least one pdpd context associated with it. This
way by checking the restart counter in the ECHO Reply it can be known if
the GGSN was restarted. In this case, logic already present in osmo-sgsn
will terminate all pdp contexts associated with that GGSN.
Change-Id: I9d714726785407859f26bbef052cd0efc28e8dae
Use the proper enum ranap_nsap_addr_enc instead of int, and properly exclude
that member when we're building without Iu support:
sgsn_vty.c:1323:31: error: passing argument 2 of ‘ranap_iu_vty_init’ from incompatible pointer type [-Werror=incompatible-pointer-types]
ranap_iu_vty_init(SGSN_NODE, &g_cfg->iu.rab_assign_addr_enc);
Add const to a local var to silence compiler warning retrieving TLVP_VAL:
gprs_gmm.c:1657:18: error: initialization discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
uint8_t *mi = TLVP_VAL(&tp, GSM48_IE_GMM_ALLOC_PTMSI);
^~~~~~~~
Change-Id: I1168ce6425c31db3f6c3bf1f3682ae96b028c59b
Default behavior is to have them disabled, and can be explicitly
disabled too by using 'no cdr trap' cmd.
Tested with osmo_ctrl.py that messages are send successfully:
TRAP 0 cdr-v1 20171129125950222,901700000015254,357737055592090,555,0,5,,pdp-periodic,2731,127.0.0.2,127.0.0.1,internet,176.16.222.3,20793,10045,1
Related: OS#2360
Change-Id: I1d144d87effd934d991257a65e19cf046a938907
* make gtp_ntoa() public after renaming it to sgsn_gtp_ntoa() to avoid
confusion with libgtp functions
* use it to log GTP-U endpoints address updates
Change-Id: I96d0f3a63cce338471cc39cc33fd44c39cd2aa73
Related: SYS#3610
Neels Hofmeyr
Eric Wild
Pau Espin
Alexander Couzens
Harald Welte