This patch adds a test case test_tbf_li_decoding which
expects a current bug with LI decoding for row 4 of Table 10.4.14a.1
in 44.060 version 7.27.0 Release 7.
The test's expectation is corrected along with the bug
fix in a subsequent commit
Related: OS#1811
Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
This patch adds a test case test_tbf_update_ws. Which expects a
current bug with DL window size calculation. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1808
Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
Interface structure between osmo-bts and osmo-pcu is updated with
the parameters to differentiate the type of RACH and further
support 11 bit RACH. The function prototype and definitions are
changed accordingly. Interface version number is increased.
Change-Id: I265c2d92d36d6cbcbeee60cdd8407dafe1da06a4
Earlier there was an incorrect encoding of PUAN when VQ is not equal
VR case for EGPRS UL RLC window. The PCU was encoding the same PUAN
message always irrespective of radio condition. This was a bottle neck
for performance testing. Which has been fixed in this patch.
Related: OS#1793
unit test assertion in the previous commit is fixed in this patch.
Change-Id: Iba7b1995028bd81749ffb080616b2ad5f2540d57
This patch adds a test case which expects a current bug with EGPRS PUAN
encoding when VQ != VR. The test's expectation is corrected along with
the bugfix in a subsequent commit
Adds test_tbf_puan_urbb_len to describe the following bug:
EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN
messages regardless of the urbb_len.
Related: OS#1793
Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
ARFCN is already part of TRX struct so there's no need to supply it
explicitly in a separate parameter. I've tested and those are the same
anyway.
Change-Id: I8e975c52cbc819427880093b1e5371fe1f8ce460
During MCS upgradation such as MCS6->MCS9, 2 blocks which
were sent separately as MCS6, will be clubbed into one MCS9
block during retransmission. Same holds good for
MCS5->MCS7 transistion. During MCS reduction such as
MCS9->MCS6,2 blocks which were sent together will be
sent separately during the retransmission case.
Same is verified through the generated log file. Currently
MCS8->MCS6 transition is not supported. The retransmission
MCS is being calculated from Table 8.1.1.2 of TS 44.060.
The same test cases are also integration tested on Nuran
1.0 platform.
Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently existing TBF can be reused after an MS has sent a RACH
request. Since the MS can be or most probably is in packet idle mode
in that case, the TBF are no longer usable even if they share the
PDCHs and the control TS with the new one.
There are occasional freezes where the MS does no longer react to
messages sent on the PACCH.
This change aborts all pending TBFs if a new TBF is or has been
established via RACH.
Sponsored-by: On-Waves ehf
Currently the window size is fixed to 64 even for EGPRS.
Support dynamic window sizes depending on the number of PDCH. The
WS can be set to b + f * N_PDCH. If the result is not valid according
to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the
next lower valid value (or 64).
The following VTY commands are added (config-pcu node):
window-size <0-1024> set base (b) value and leave f unchanged
window-size <0-1024> <0-256> set base (b) and factor (f)
Sponsored-by: On-Waves ehf
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
The multislot (MS) class and the EGPRS MS class can also be passed
via BSSGP in an MS Radio Access Capability element which can
optionally be contained in a DL-UNITDATA PDU. While this case is fully
supported for GPRS, the EGPRS MS class in BSSGP messages is ignored.
This commit extends gprs_rlcmac_dl_tbf::handle to pass the EGPRS MS
class, too.
Note, that the EGPRS class is not yet taken from the CSN.1 RA
capability and is always set to 0. Note also, that append_data
still uses ms_class only.
Sponsored-by: On-Waves ehf
Currently an existing DL TBF can get lost in the process of
establishing an UL TBF via RACH. This can lead to stalled connections
until the network sends more LLC frames.
This commit adds a check for a non-empty LLC queue after the UL TBF
has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK
path) to eventually establish a new DL TBF on the UL TBF's PACCH.
Sponsored-by: On-Waves ehf
Currently when a second MS object has been created for an MS, because
the TLLI was not known yet, the will be detected in
gprs_rlcmac_tbf::extract_tlli and the two objects will be merged by
update_ms. But when the dl_tbf is moved from the old to the new
(second) MS object, the old MS object can get idle and be removed
before the object are merged. This can cause LLC frame loss when the
MS object is deleted immediately after getting idle (no timeout
configured).
This commit adds a guard to keep the MS object until extract_tlli has
been executed.
Sponsored-by: On-Waves ehf
This reverts commit e91bd3babd.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
Currently all of these messages are discarded if they are assumend to
be caused by noise. But even in these cases, the FN and TN values
which are added by the DSP are valid. So these can be used to update
the current_frame value.
The osmo-bts sets the fBFILevel of a physical channel to -200dB if it
is used for PDTCH or PACCH which is the case for all PDCH. This way
a data_ind or ra_ind message is already send at least once per block
period (4 frames) per PDCH. These messages are passed to either
handle_ph_data_ind or handle_ph_ra_ind even if they contain garbage
data.
The ra_ind messages are sometimes sent a few frames earlier than
data_ind messages using the same frame.
This commit adds calls to update the current_frame value based on all
of these messages before they are discarded. The FN taken from ra_ind
are passed with an increased max_delay (5) to compensate for early
ra_ind messages.
Sponsored-by: On-Waves ehf
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
This tests the usage of an existing TBF that is no longer in FLOW
state to request a new DL TBF via the old TBF's PACCH.
The test triggers a bug that breaks the association between both TBF
objects, resulting in packet loss and transmission stalling.
Sponsored-by: On-Waves ehf
Currently the assignment is completed by manipulating the state of
the TBF objects directly by setting the state fields to fixed values.
This way, the PCU's code that is responsible to update the state
accordingly is not tested.
This commit changes this to simulate RLC Control Acknowledgement
messages instead.
Sponsored-by: On-Waves ehf
This function basically request the generation of the next downlink
RLC block. Since this will no really send somthing to the PCU, the
current name can be misleading.
This commit just renames the function.
Sponsored-by: On-Waves ehf
The block number can always be deduced from the frame number. The
current test code handles the block number explicitely, which makes
the code more complex and has also led to block number errors cause
by not wrapping the numbers (valid block numbers range from 0 to 11).
This commit changes send_rlc_block to always compute the block number
based on the frame number. It also turns the block_nr into an
optionaly output-only parameter.
Sponsored-by: On-Waves ehf
The current implementation takes a lot of parameters (bts, trx_no,
...) that can also be taken from a TBF object.
This commit adds an alternative variant with just takes a TBF, the fn
(in/out), and the block number (in/out).
Sponsored-by: On-Waves ehf
Currently the pending LLC packets are lost in some cases when MS
objects are merged, for instance after a RACH when there were 2 MS
object for the same MS (they get merged, when the TLLI is known for
both objects).
This patch modifies GprsMs::merge_old_ms to move all pending LLC
packets (if there are any) to the current MS object.
Sponsored-by: On-Waves ehf
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
This adds tests for
- RA update with RACH for the RAUpdateComplete message
- RACH for UL while DL is active (LLC queue not empty)
Sponsored-by: On-Waves ehf
This commit fixes several issues:
- Set MS class in request
- Set IMSI in establish_ul_tbf_two_phase
- Fake assigment acknowledgement in establish_ul_tbf_two_phase
- Fix TFI bit offset to 1 (was 2)
Sponsored-by: On-Waves ehf
Currently the functions test_tbf_single_phase and test_tbf_two_phase
do the test logging, BTS intialisation, and the complete message
sequencing on their own. Therefore they cannot be used to test more
complex sequences like TBF reestablishment.
This commit moves the code that does the actual messaging into own
functions. The frame number handling is generalised which also fixes
a block number wrapping error on the way.
Sponsored-by: On-Waves ehf
Currently there is not support for Network Service (NS) logging.
This commit adds the missing definitions and sets the default level
to INFO. Further configuration can now be done with the 'logging
level ns' VTY command.
Sponsored-by: On-Waves ehf
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
Currently when receiving a PACKET DL ACK/NACK message with the Final
Ack Indicator bit set, the TBF's state is set to
GPRS_RLCMAC_WAIT_RELEASE but T3193 is only started when the LLC queue is
empty. Otherwise the reuse_tbf() method is called to establish a new
DL TBF. In that case, the timer is not started. This will leave the
current TBF without a timer so it is potentially not released later
on.
This is recognisable by sticky entries in the output of the
'show tbf all' command and possibly allocation failures if there are
too many of them.
This commit changes the code to always start T3193 to make sure, that
a timer is always active when the the state is set to
GPRS_RLCMAC_WAIT_RELEASE.
Note that TS 44.060, 9.3.2.6 requests to release the 'old' TBF
immediately in some cases, which is not implemented by this change.
This will lead to a longer reservation period of the TFI only, which
is safer than reassigning it too early.
Sponsored-by: On-Waves ehf
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
To avoid the need for a switch or conditional statement when needing
a TBF from an MS object in direction independant code, this method
contains that case distinction. For additional flexibility, a
reverse() function is added to get the opposite direction.
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
This method does not do anything anymore, it's functionality has been
taken over by update_ms.
This commit removes gprs_rlcmac_tbf::update_tlli completely.
Sponsored-by: On-Waves ehf
When the MS is pinged with a longer interval, many packets get lost
even if the GprsMs object is kept. If the interval is above the time
where the DL TBF is in state FLOW (mainly influenced be the
dl-tbf-idle-time command), an new TBF must be requested via AGCH for
each ICMP PING message.
Currently the LLC frame containing the PING is immediately stored
in the TBF and gets lost, if TBF establishment fails for some reason.
This commit moves all calls to put_frame() to schedule_next_frame(),
where the data is moved from the LLC queue to the frame storage
within the TBF object. This method is only called from within
create_new_bsn() when the TBF is in the FLOW state and the frame is
going to be encoded immediately.
At all other places, where put_frame() has been called before, the
LLC message is just appended to the LLC queue in the GprsMs object.
This change effectively simplifies the related code parts, since
date/len information and discard notifications is no longer needed
there.
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently LLC frames are lost or even reordered when the TBF has be
established via the AGCH and the procedure fails for some reason.
This test tries to reproduce this behaviour by throwing away the
first TBF while calling the handle() method several times. The
results of create_dl_acked_block() are checked against expected
values (this is currently party disabled because the bug still
persists).
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently only the RSSI value is passed to the upper layers. Other
values like TA and BER which are needed for TA update respectively CS
selection are not propagated.
This commit introduces and passes a struct that contains a set of
measurement values.
Sponsored-by: On-Waves ehf
Currently the current CS value is stored in the cs field of
gprs_rlcmac_tbf and initialised when it is used the first time.
This commit adds separate fields for UL and DL CS values to the
GprsMs class and provides corresponding getter methods for GprsMs and
gprs_rlcmac_tbf.
Ticket: #1739
Sponsored-by: On-Waves ehf
The TA value rather relates to an MS and not to a single TBF. So all
TBFs share the same TA value. Currently the TA value is stored per
TBF and eventually copied from an old TBF to a new one. It is in
general only passed with an RACH request when the TLLI and thus the
MS is not yet known.
This commit adds a TA member to the GprsMs class and uses that one
when the TBF is associated to an MS object. Since the TBF is not
always associated with an MS object (after RACH or when it has been
replaced by another TBF), the TA value is still stored in each TBF
and that value is used as long as no MS object is being associated.
Sponsored-by: On-Waves ehf
These tests cover the message exchange from receiving from the first
RACH request to the first data block when establishing an uplink TBF.
This will be used to check, whether TA and other values are passed to
an MS object correctly.
In addition, the RX RACH log message in rcv_rach is extended to
contain the single block fn.
Sponsored-by: On-Waves ehf
Currently a new TBF is chained to an existing older one, either of
the other direction (active or releasing) or of the same direction
(releasing). This does not work properly work if and uplink and a
downlink TBF are being established at the same time while an old TBF
is being released. In that case, one of them is thrown away and the
pending procedure is cancelled.
The chaining is no longer necessary since the GprsMs objects have
been introduced which keep track of the active TBFs.
This commit removes the TBF members m_new_tbf and m_old_tbf and the
related methods and code paths.
Note that a new TBF can replace an older TBF entry of the same
direction within an MS object when it is associated with an MS (e.g.
by TLLI or because it is assigned via another, already associated
TBF). In that case, the old TBF is no longer associated with an MS
object.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the DL TBF's TLLI are not set. This will have to change in
the future, when the m_new_tbf chaining is replaced by the usage of MS
object to group TBFs.
This commit just calls update_ms() on newly created TBFs. This
changes many of the lines written to stderr due to the TLLI change,
but doesn't change other aspects or messages beside creating and
destroying MS objects.
Sponsored-by: On-Waves ehf
This commit extends get_ms() to really compare the IMSI if it has
been given. Matching by TLLI has a higher precedence than matching by
IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the IMSI is stored in the TBFs. Since it directly refers to
an MS, it should rather be stored in an MS object.
This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs,
changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated
MS object, and adds getter and setter to GprsMs. Before changing the
IMSI of the associated MS object, assign_imsi() checks if there is
already another MS object with the same IMSI and eventually resets
the IMSI of that one. So using update_ms() and assign_imsi() ensures
that there are not two MS object entries is the storage with the
same TLLI or the same IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the generated IMSI contains blanks due to a missing '0'
flag in the corresponding snprintf statement. In addition, the buffer
is effectively limited to 15 bytes which is shorter than the
generated character sequence, such that the last character of the
IMSI is removed.
This patch fixes both issues. Since snprintf itself will add a
terminating \0 character, the whole buffer can be passed to snprintf.
Sponsored-by: On-Waves ehf
Currently the m_tlli member in GprsMs is set by the constructor,
circumventing the TLLI confirmation mechanism.
This commit replaces the get_or_create_ms() method by a create_ms()
method which takes the TLLI and the direction (UL or DL) as
parameters to select either set_tlli() or confirm_tlli(). The MS
object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is
extended to return the DL TLLI if both of the other TLLI are not set.
Note that create_ms() will not check whether an MS object with a
matching TLLI is already stored in the list, so it should only be
called after a corresponding get_ms() in general.
Sponsored-by: On-Waves ehf
Currently the TLLI is stored in each TBF. Since each MS is now
represented by a GprsMs object which takes care of TLLI updating,
and each TBF that has been associated with an TLLI also contains a
reference to a GprsMs object, per TBF TLLI handling is no longer
needed. Keeping all TBF m_tlli members up to date is complex and
doesn't currently work correctly in all circumstances.
This commit removes m_tlli and related members from the TBF class and
the tbf_by_tlli functions from the BTS class.
Ticket: #1674
Sponsored-by: On-Waves ehf
The type of the TBF update_ms() is being called on does not always
reflect whether the TLLI has been signaled by the MS or the SGSN.
This commit adds an additional parameter to tell the method, in which
direction the TLLI has been passed.
Sponsored-by: On-Waves ehf
According to the specification (GSM 04.08/24.008, 4.7.1.5) after a
new P-TMSI has been assigned, the old P-TMSI must be kept basically
until it has been used by both sides. Since the TLLI will be derived
from the P-TMSI, the old TLLI must also be kept until the new TLLI
has been used by both MS and SGSN.
This commit modifies the TLLI handling of GprsMs accordingly.
set_tlli() is only used with TLLIs derived from MS messages,
confirm_tlli() is used with TLLIs derived from messages received from
the SGSN. tlli() returns the value set by the MS. check_tlli()
matches each of the TLLI used by either MS or SGSN as well as the old
TLLI until it has been confirmed.
Sponsored-by: On-Waves ehf
To show the talloc report more easily, this commit adds a call to
talloc_report_full if the TALLOC_REPORT_FULL environment variable is
set (the value is ignored). Since the stderr output is checked by the
test suite, this feature is not enabled by default.
Sponsored-by: On-Waves ehf
Currently the ul_tbf is used in its own declaration as an argument to
tbf_alloc_ul_tbf, where dl_tbf can be used instead and makes more
sense.
This commit uses dl_tbf instead of ul_tbf as old_tbf.
Addresses:
tbf/TbfTest.cpp:71:14: warning: ‘ul_tbf’ may be used uninitialized in
this function
Sponsored-by: On-Waves ehf
Currently fn and block_nr are not incremented correctly. In addition,
the comments around the sending of blocks are not accurate either.
This commit introduces the send_rlc_block helper function which takes
care of the increments, updates the comments to reflect what is
really happening, and adds assertion to verify at least some aspects
of what is now stated in the comments.
Sponsored-by: On-Waves ehf
Put the generic parts of test_tbf_final_ack into helper functions to
reduce the size of the test and to avoid too much code duplication
when creating new tests.
Sponsored-by: On-Waves ehf
Currently if a 'new' TBF is freed before the 'old' one (where
old_tbf->m_new_tbf == new_tbf), the old_tbf->m_new_tbf is not cleared
and can be accessed later on. This can lead to inconsistencies or
segmentation faults.
This commit adds m_old_tbf which points back from new_tbf to old_pdf.
m_new_tbf and m_old_tbf are either both set to NULL or one is the
reverse pointer of the other (tbf->m_new_tbf->m_old_tbf == tbf and
tbf->m_old_tbf->m_new_tbf == tbf). It extends set_new_tbf and
tbf_free to update the pointee accordingly.
The TBF test is extended to check this invariant at several places.
Sponsored-by: On-Waves ehf
When new_tbf is freed before dl_tbf in test_tbf_final_ack, dl_tbf
still contains a pointer to it in m_new_tbf.
This patch changes the test to accept a test mode parameter and runs
it twice which a different order of tbf_free in each run. Consistency
checks are added, to check for a danglilng m_new_tbf pointer in both
cases.
Sponsored-by: On-Waves ehf
The test called the llc enqueue() function directly which didn't take
care of prepending the tv values for the timeout to the data.
Now the test uses dl_tbf.append() which takes care of prepending the tv
values. With this patch make distcheck on jenkins should no longer fail
with "Discarding LLC PDU because lifetime limit reached." messages.
UL and DL tbfs are used in very separate parts and are not the same
thing so split the alloc function and use the UL/DL version throughout
the code.
Ticket: SYS#389
Sponsored-by: On-Waves ehf
During a routing area update a new P-TMSI was assigned. During
the PACKET CONTROL ACK on the DL we notice the change of TLLI
but didn't propagate this. This means that a Routing Area Update
Complete was only sent after a new RACH request.
Addresses:
<0007> gprs_rlcmac_meas.cpp:103 UL RSSI of TLLI=0x88661bc6: -67 dBm
<0002> bts.cpp:945 Got ACK, but UL TBF is gone TLLI=0xe512eba3
<0007> gprs_rlcmac_meas.cpp:158 DL packet loss of IMSI=274080000004765 / TLLI=0xe512eba3: 0%
<0002> tbf.cpp:668 TBF TFI=0 TLLI=0x88661bc6 T3169 timeout during transsmission
<0002> tbf.cpp:690 - Assignment was on PACCH
<0002> tbf.cpp:694 - No uplink data received yet