Currently the CCCH flag is cleared and the PACCH flag is set when a
multislot upgrade is scheduled for a downlink TBF, even if the MS has
never confirmed in any way that the PACCH really exists. This can
happen if the MS did not receive the DL IMM.ASS. Since the CCCH flags
gets cleared in that case, the IMM.ASSS is never retried and all
subsequent PACKET DOWNLINK ASSIGNMENTS will fail.
This commit delays the update of these flags until the MS has
responded with a corresponding CONTROL ACK.
Sponsored-by: On-Waves ehf
Currently the old TFI is always used as ID when a
PACKET DOWNLINK ASSIGNMENT is generated. This fails
if the old TBF has not been fully assigned yet. The
MS will then ignore the PDA.
This commit changes write_packet_downlink_assignment to accept
an additional parameter old_tfi_is_valid and uses the new TBF's
TLLI instead of the olf TFI if that parameter is set to false.
Sponsored-by: On-Waves ehf
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently there are some places where tbf->control_ts != ts is
evaluated to check, whether ts is a control slot.
Replace these expressions by tbf->is_control_ts(ts) which does
the same whitout exposing internal fields.
Sponsored-by: On-Waves ehf
Currently the checks in that function are based on the different
internal TS values of a TBF. It is assumed that they match the TS
that the current RTS refers to.
This commit adds a TS parameter to create_ul_ass, create_dl_ass,
and create_ul_ack to make this more explicit.
Sponsored-by: On-Waves ehf
Currently existing TBF can be reused after an MS has sent a RACH
request. Since the MS can be or most probably is in packet idle mode
in that case, the TBF are no longer usable even if they share the
PDCHs and the control TS with the new one.
There are occasional freezes where the MS does no longer react to
messages sent on the PACCH.
This change aborts all pending TBFs if a new TBF is or has been
established via RACH.
Sponsored-by: On-Waves ehf
Currently the is a release() function which takes care of
statistics and shutdown of properly finished TBFs, but which
cannot be used for aborted TBFs.
This commit add an abort() method which handles unacked RLC blocks
as lost and doesn't start a release timer. This method will be
invoked by tbf_free() for downlink TBF.
Sponsored-by: On-Waves ehf
According to spec, the lowest numbered PDCH of the TBF shall be used
for the PACCH, only when concurrent TBF are active, the lowest common
PDCH shall be used. An immediate assigment is in general only sent,
if no TBF is active, so the latter case never applies.
This reverts commit fdd8a1ba2312be3f33576ee994c0b5da6272e815.
Make use of variables, log them to LOGL_DEBUG, and reduce code
duplication.
This should help to narrow down the cause why snd_dl_ass are not
answered by the MS sometimes.
Sponsored-by: On-Waves ehf
That IE may contain inaccurate or completely bogus data.
This commit disables the parsing.
Note that this should be replaced by a config option.
Sponsored-by: On-Waves ehf
Currently the values in the BSSGP RA Cap IE are eventually use
overwrite the 'good' values obtained from the MS earlier.
Use the 'good' values when the are present, which is assumed if
at least one of ms->ms_class() or ms->egprs_ms_class() is set.
Sponsored-by: On-Waves ehf
In case there is no MS object present that matches a DL UNITDATA,
the EGPRS class is currently assumed to be 0, since the Radio
Access Capabilities IE is not fully decoded if present.
This commit uses the CSN.1 decoder to parse the IE and uses the
same functions like the uplink related code does to get the GPRS
and EGPRS multislot classes.
Remove the old parse_ra_cap_ms_class function.
Sponsored-by: On-Waves ehf
Just keep this for later reference, since a CSN.1 decoder based
implementation will be used.
This reverts commit b37ab36bb14d2d2c1363fbe521cd19984d0c3d4c.
Add an extended parse_ra_cap function based on the existing
parse_ra_cap_ms_class which also parses up to the EGPRS related
fields.
Sponsored-by: On-Waves ehf
Currently the window size is fixed to 64 even for EGPRS.
Support dynamic window sizes depending on the number of PDCH. The
WS can be set to b + f * N_PDCH. If the result is not valid according
to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the
next lower valid value (or 64).
The following VTY commands are added (config-pcu node):
window-size <0-1024> set base (b) value and leave f unchanged
window-size <0-1024> <0-256> set base (b) and factor (f)
Sponsored-by: On-Waves ehf
Currently only the GPRS MS class and the DL CS (even for UL TBFs)
are shown.
Add the EGPRS MS class and use the TBF's real CS.
Sponsored-by: On-Waves ehf
These functions are currently defined in src/gprs_rlcmac_ts_alloc.cpp
but will be needed elsewhere.
Turn them into template functions to support different types and move
them to pcu_utils.h.
Sponsored-by: On-Waves ehf
Currently gprs_rlc_ul_window and gprs_rlc_dl_window are completely
separate classes, containing several identical members and methods.
This commit add a shared parent class containing WS and SNS handling.
Sponsored-by: On-Waves ehf
If the downlink BSSGP didn't contain a RA Capabilities IE, both
MS class values are 0. The phone will send valid RA Caps later on.
Currently in that case, the downlink TBF is not established
if EGPRS is enabled.
Just force egprs_ms_class to 1 if EGPRS (only) is enabled.
Sponsored-by: On-Waves ehf
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
Currently the coding scheme gets reset when GprsMs::set_mode()
is called even if the mode did not change.
Make sure, that the CS is only reset, if it is not compliant to the
new mode.
Sponsored-by: On-Waves ehf
The bitvec RBB is always valid, even when FINAL_ACK_INDICATION is
set. This is done by the ack/nack decoder function which fake a
bitmap starting with V(A) up to V(S)-1 in that case (see
Decoding::handle_final_ack).
Call gprs_rlcmac_dl_tbf::update_window unconditionally and only use
is_final for logging and TBF state changes in
gprs_rlcmac_dl_tbf::rcvd_dl_ack.
Sponsored-by: On-Waves ehf
The current methods are based on the GRPS specific RBB and SSN values
and formats which are not compatible with EGPRS.
Add a second set of similar methods with the same semantics but
which are based on a bitvec and the first BSN instead.
The following methods are affected:
- gprs_rlc_dl_window::update
- gprs_rlcmac_dl_tbf::rcvd_dl_ack
- gprs_rlcmac_dl_tbf::update_window
Sponsored-by: On-Waves ehf
Currently the RBB is used and passed directly to the window handling
methods. For EGPRS a more abstract bitvec is derived from the messages
and will passed around instead.
Add a similar function for GPRS so that the same window handling can
be used for GPRS and EGPRS.
Sponsored-by: On-Waves ehf
Currently CRBB bitmaps are ignored if they are present.
This commit enables the decoding.
Note that this requires osmo_t4_decode in libosmocore.
Sponsored-by: On-Waves ehf
Currently only uncompressed bitmaps (URBB) are supported in
PACKET UPLINK ACK/NACK messages.
Extend decode_egprs_acknack_bits to decode compressed bitmaps (CRBB),
too.
Note that this code is only active, if the macro WITH_CRBB_DECODING
is defined.
Sponsored-by: On-Waves ehf
Currently this message is ignored.
Support decoding and handling of this message. Use a bitvec for the
decoder that just represents a BSN sequence without any encoding
details (first bit -> first BSN). Return the corresponding BSN range
(snsmod(bsn_begin + bits_in_bitvec) = bsn_end), so snsmod(bsn_end-1)
is the last BSN if there is at least 1. If bsn_begin == bsn_end, no
BSNs has been added.
Note that this bitvec is not yet used for RBB handling. It just calls
the old rcvd_dl_ack with a faked (all bits are 1) RBB map.
Sponsored-by: On-Waves ehf
The presence of the LENGTH field adds an additional offset which
breaks the related M_SERIALIZE in gsm_rlcmac.cpp. In that case,
the Desc in EGPRS_AckNack_t is being cast to EGPRS_AckNack_w_len_t
and then ((EGPRS_AckNack_w_len_t *)Desc)->Desc is filled with the
parsed data, which is a platform dependant number of bytes apart the
real Desc struct.
Remove LENGTH field from EGPRS_AckNack_w_len_t so that the Desc field
is the first field.
Note that this is not a real fix. The rlcmac wireshark dissector
still has the same declaration but doesn't seem to suffer from this
problem.
Sponsored-by: On-Waves ehf
The MS' RLC receiver needs a valid CPS field to decode the block.
Add the function gprs_rlc_mcs_cps to generate the CPS value based on
coding scheme, puncturing, and padding.
Sponsored-by: On-Waves ehf
Currently only GPRS data block encoding is supported.
This commit adds rlc_data_to_dl_append_egprs which does the EGPRS
specific extension and chunk handling. It extends
Encoding::rlc_data_to_dl_append to use that function for MCS coding
schemes.
Sponsored-by: On-Waves ehf
Currently the GPRS data block encoding is applied to every
coding scheme, even if an MCS is selected.
This commit renames the actual encoding function to
rlc_data_to_dl_append_gprs (not exported) and puts
selection code into Encoding::rlc_data_to_dl_append. This
requires an additional cs argument.
Sponsored-by: On-Waves ehf
Currently TBF related tasks (status changes, counter updates,
LLC dummy command insertion) as well as
RLC data block generation are done within create_new_bsn.
The data block creation part has already been copied to
the stateless Encoding::rlc_data_to_dl_append function.
This commit changes create_new_bsn to use the encoder function and
just care about the TBF related stuff.
Since the rlc_data_to_dl_append function has been validated against
the test cases being described in annex B of TS 44.060, this
commit fixes an encoder bug which leads to broken LLC frames in
a special case (see example B.2, the main header's E bit was
erroneously set to 1 in that case). When this happens, the LLC frame
will get discarded after reassembly, so that TCP will have to
retransmit the lost packet.
Sponsored-by: On-Waves ehf
This function appends a single chunk to an RLC downlink data block.
The implementation is basically taken from the
gprs_rlcmac_dl_tbf::create_new_bsn method without the TBF related
functionality and any side effects.
Note that it still only supports GRPS.
Sponsored-by: On-Waves ehf
This commit removes the use of struct rlc_dl_header from
gprs_rlcmac_dl_tbf::create_dl_acked_block and
gprs_rlcmac_dl_tbf::create_new_bsn. Instead of patching the
data area directly, the RLC block encoding functions are used.
Note that the data unit encoding is still hard-coded to GPRS in
create_new_bsn, so using MCS 1-4 (albeit being supported by the
encoder) will not work yet.
Sponsored-by: On-Waves ehf
Currently the (GPRS) RLC block encoding is done by setting the
header fields directly in gprs_rlcmac_dl_tbf::create_new_bsn.
This is much more complex with EGPRS, since the data fields are
not byte aligned, the header formats depend on the header type,
and the mapping of bits to bytes is LSB first.
This commit adds Encoding::rlc_write_dl_data_header which writes
the header according to the given gprs_rlc_data_header structure.
Encoding::rlc_copy_from_aligned_buffer is also added to copy
byte sequences into the message.
Note that the actual encoding of data units is not yet present.
Sponsored-by: On-Waves ehf
Add the functions gprs_rlc_data_info_init_dl/ul which initialise a
gprs_rlc_data_info structure depending on the coding scheme. The
fields num_data_blocks, data_offs_bits, cs, and the data_blocks are
valid after this call. The other fields are set to 0.
The data blocks are initialised to the correct data_len, e == 1
(no extension header field), cv == 15 (not a final block). The other
data block fields are set to 0.
The gprs_rlc_data_block_info can also be initialised separately
by using the gprs_rlc_data_block_info_init function.
Sponsored-by: On-Waves ehf
Jacob Erlbeck