Use bitvec_set_*() directly without external write pointer tracking to
simplify the code. This is part of IA Rest Octets (3GPP TS 44.018
§10.5.2.16) which is the last part of the message so it should not
interfere with the rest of encoding functions.
That's partially based on reverted commit 529ce88545.
Change-Id: I143b3dd02aa54b9ce206d9e780a5554f6d9fd118
Related: OS#3014
Use bitvec_set_*() directly without external write pointer tracking to
simplify the code. This is part of IA Rest Octets (3GPP TS 44.018
§10.5.2.16) which is the last part of the message so it should not
interfere with the rest of encoding functions.
That's partially based on reverted commit 529ce88545.
Change-Id: I19cc4226e7e831e7d7f70212b2078f5589a87ff0
Related: OS#3014
Use bitvec_set_*() directly without external write pointer tracking to
simplify the code. This is part of IA Rest Octets (3GPP TS 44.018
§10.5.2.16) which is the last part of the message so it should not
interfere with the rest of encoding functions.
That's updated version of commit with the same topic reverted earlier.
Change-Id: Ie180733d2584ebb16fb80b84526d0dbc70e3d441
Related: OS#3014
In preparation for upcoming patches with 11 bit RACH and TA support,
let's restructure existing encoders to simplify further modifications:
* move consistency checks to top-level Imm. Ass. encoder
* use consistent formatting
* constify pointers where appropriate
* split SBA and MBA encoders into separate functions
Those changes also make it obvious which parameters are necessary for
Rest Octets in each specific case (DL, UL-SBA, UL-MBA, UL-SBA-EGPRS,
UL-MBA-EGPRS).
There're no functional code changes so there's no need to adjust tests.
Change-Id: I0ad1bc786c3a8055ea9666f64ae82c512bd01603
Related: OS#1548
Both OsmoBTS and OsmoBSC use their own copies of this header nowadays so
we can simplify our installation slightly by making it local only.
Change-Id: I4a87395d4ab7212fe2fc055dae0a737e10d20c69
Add new environment variables WITH_MANUALS and PUBLISH to control if
the manuals should be built and uploaded. Describe all environment vars
on top of the file.
When WITH_MANUALS is set, install osmo-gsm-manuals like any other
dependency and add --enable-manuals to the configure flags (for "make"
and "make distcheck"). Add the bin subdir of the installed files to
PATH, so osmo-gsm-manuals-check-depends can be used by ./configure.
Related: OS#3385
Change-Id: Ia5b112fc1663b78800d3c2c4ff2a0771cf5af11b
Set AM_DISTCHECK_CONFIGURE_FLAGS in Makefile.am instead of
DISTCHECK_CONFIGURE_FLAGS. This is the recommended way from the
automake manual, as otherwise the flag can't be changed by the user
anymore.
Related: OS#3718
Change-Id: I10d1eef9838c0b843a3a4103b7b03e8e9457b69e
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I7270652de393a98748c0cdc51e626c17ab8f44c2
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
Unfortunately a glob like osmo-x__*.{svg,png} doesn't work, so have the
suffixes in separate globs.
Add dashes to indicate that failure should be ignored.
Change-Id: I6bc4d9ea72b43a573acbc860c23397f748de2c7b
Generate *.check files from asciidoc output and grep for WARNINGs.
Add *.check files to gitignore and to 'make clean'.
Change-Id: Ibccc83a3415930a528f2e8e4e4dda3b81c6d0b64
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
In Change-Id I7d22e7b5902c230efeae66eb20c17026a4037887 we
introduced the use of timespecsub(). Unfortuantely, we also
accidentially removed the call to osmo_clock_gettime() along
with it, leaving now_tv completely uninitialized.
Change-Id: Ieced0c62700b2fe4ab0208258183154cc701490b
Related: OS#3225
Fixes: Coverity CID#188872
In pcu_l1if_open(), use osmo_strlcpy() instead of strncpy() and check for
overflow. This catches overlong and non-NUL-terminated socket paths.
Change-Id: I825190cbb34d052b797e9fb5208884d6f5992839
Related: OS#2673
For some unknown reason ld was failing to find some asan symbols until I
enabled asan too in CXXFLAGS.
Change-Id: I695314b284277674dc336b40765313a37d238d6e
Let's use a symlink in debian/ as we do in other projects,
and merge the two service files since anyway they call the same binary.
Change-Id: Ibd82ec12cbeb73a27ca5860266587efb58be14ab
The .tarball-version file should contain the *source version* uniquely
identifying the git commit, and not the Debian package name.
With https://gerrit.osmocom.org/#/c/osmo-ci/+/10343/ there is a correct
.tarball-version file in the .tar.xz of the nightly source packages.
Change-Id: I093c9c1943e5f09d8f91f94af438f697a93e7127
Related: OS#3449