This commit would also remove the option from config_write_pcu() since
it's automatically filled in by osmo_tdef, but there was actually a bug
because that param was never printed when saving the config...
Change-Id: Id8e70b0f44ef2f7e20ecdb3fd8ca93ae2a05b9a3
Receive an Application Information Request from the BTS via PCU
interface. Construct a Packet Application Information message from it
(3GPP TS 44.060 11.2.47) and send it to all MS with active TBF.
The TTCN-3 test infrastructure to test this feature is not quite ready
yet, so I've added C unit tests instead.
Related: OS#4048
Change-Id: Ie35959f833f46bde5f2126314b6f96763f863b36
This will allow for configuration of some of the timers by the user,
and allow him to inspect current values being used.
It will be also useful for TTCN3 tests which may want to test some of
the timers without having to wait for lots of time.
Timers are splitted into 2 groups: BTS controlled ones and PCU controlled
ones. The BTS controlled ones are read-only by the user (hence no
"timer" VTY command is provided to change them).
TbfTest.err output changes due to timers being set up correctly as a
consequence of changes. Other application such as pcu_emu.cpp and
pcu_main.cpp had to previosuly set the initial values by hand (and did
so), but apparently TbfTest.c was missing that part, which is now fixed
for free.
Depends: libosmocore.git Id56a1226d724a374f04231df85fe5b49ffd2c43c
Change-Id: I5cfb9ef01706124be262d4536617b9edb4601dd5
Since [1], OsmoPCU already starts to retransmit downlink blocks before
the MS has had a chance to receive them and/or send the related
acknowledgement in uplink. Make this optional with the new VTY option
"no dl-tbf-preemptive-retransmission".
[1] e25b5b91f6 ("tbf: Only create dummy frames if necessary")
Related: OS#2408
Change-Id: Id08aed513d4033aa0d4324c6ce07cbb2852f2f92
Ubsan complains about shifts into the sign bit due to automatic int
promotion, so cast explicitly.
Change-Id: I6387c7313832f6c7c920e1016b74562b66d6b68e
Related: OS#4029
Add method to explicitly cleanup BTS singleton similar to GprsMsStorage
class and use it from main(). The destructor becomes trivial wrapper
around cleanup() method.
This prevents annoying SIGABRT on exit of OsmoPCU caused by
rate_ctr_group_free() being called after talloc_free() which removes the
context in which counter group is allocated.
Change-Id: I796d56a7de3f3a1f9d59708995c8e3e9b05a2747
There is a duality of initialization: early_init() in bts.cpp wants to init
logging even before static instances get initialized. Make sure that
tall_pcu_ctx is initialized during early_init() as well. There is a build
context that does not seem to include bts.cpp (osmo-pcu-remote), so to be sure,
init tall_pcu_ctx as NULL and both in early_init() as well as pcu_main.cpp,
init both tall_pcu_ctx and logging if it is still NULL.
Change-Id: I2199b62d0270bd35dec2283e8f5b364b7c63915b
The PDCH class and corresponding functions are rather self-contained and
independent from BTS implementation. Let's move them into separate file
to make bts.cpp more manageable. As additional benefit it allow us to
somewhat untangle all the different cross-dependent includes.
Change-Id: Ie05e25361e6741a81b024679f9675c98d4923683
Related: OS#1539
Many files include unnecessary headers and don't include headers which
are actually used. Because of that combined with the fact that OsmoPCU
is a mixture of C and C++, it makes it hard to modularize code. Fix
this (using iwyu [1] tool):
* add missing headers
* remove unused headers
[1] https://include-what-you-use.org/
Related: OS#1539
Change-Id: I8c9f488a43b099c72b2d30d3245e7ba50872fc00
Previously paging was prepared inside BTS function and than handed over
to PDCH function. Move the actual preparation into PDCH to better
decouple PDCH from BTS.
Related: OS#1539
Change-Id: I389fb16b6e54040770c21f88edbcb8e045636928
Replace unreadable if-else ladder in is_single_block() with regular
switch-case. This enables implementation of 11-bit RACH support in
follow-up patches.
Related: OS#1548
Change-Id: I9180478152f9341f11bb3dffe61671da683f24d8
* add function to set/unset given assignment type
* log assignment type flag changes
* update tests output with additional logs
This enables us to carefully track the TBF assignment type transitions.
Change-Id: I3fe9d52472be8b7f257e8326b2f84e8e7d7bd1f4
Related: OS#1759
If TS allocation fails due to unavailable TFI, print TRX which was
suggested to allocator. This simplifies allocator debugging but requires
cosmetic modifications to test output.
Change-Id: Icaf97d71d71985d52dc0bda448c26b19fe5645e7
Related: OS#2282
* document used parameters and return values
* use consistent formatting
* constify function parameters where appropriate (adjusting parameter
types if necessary)
Change-Id: I211b10b4da59c73d509b719346774515c761886a
Related: OS#2282
* define and use constant for occupied TFI instead copying the same
magic number all over the place
* use libosmocore's define for bit pretty-printer
Change-Id: I2699ceebf0cbec01652a02fa68ccc9e9419d0293
Related: OS#2282
* add functions/macros for setting TBF's poll state
* add function for checking TBF's poll state
Change-Id: I6db1c4e7bd0a49aeb5e391afe371c36b96c6a702
Related: OS#1539
* add functions/macros for setting TBF's UL/DL state
* add functions for checking TBF's UL/DL state
* move pre-free check into separate function
N. B: this should not be confused with TBF-UL or TBF-DL state.
Change-Id: Idcbf5775d17b1247f2ed01788f9b0788ce66e871
Related: OS#1539
We use the same approach for osmo_fsm: when state transition happens,
it's not very useful to always log the transition function itself, it's
much more useful to see where the actual transition comes from.
Change-Id: I348ba89bdda2b44c7019e9c893c764ee08c80bec
Related: OS#1759
The UL and DL TBF use different classes implementing window
management. Hence it's better to use it explicitly instead of using the
common window management superclass inside common TBF superclass. While
at it, also remove the direct access to window class - use accessor
functions instead.
Related: OS#1759
Change-Id: I0b55aa8947db65f7206adcf53ea32b74a831d9e6
* make is_11bit parameter into bool
* remove is_single_block() from public interface and mark it as static
* move logging outside of if ladder
* move side-effects from is_single_block() into separate static
functions
* simplify UL-TBF allocation in case of 11-bit RACH
This immediately makes it obvious that priority is never actually used
despite being computed - seems like a leftover from merge of incomplete
patch series.
Change-Id: If189b7166a29a87ffb17a7a9bc560f674851fd53
Related: OS#1548
* introduce generic function to check whether particular flag was set
for'a TBF and clear it if necessary. Use this instead of
clear_poll_timeout_flag()
* add function to explicitly set assignment and appropriate state flags
Overall this makes the code easier to read and debug.
Related: OS#1759
Change-Id: Ic4560280c72f91700f2e19c6c7f6658dc29625c2
When troubleshooting TBF timers we're not only interested in timer
duration but also in the code which triggered it. Let's use LOGPSRC to
log it: wrap t_start() in a macro for convenience.
Change-Id: If5f883ae52c469e5158bad24da9904fdc455582f
Related: OS#2407
Use generic timer handling infrastracture to handle assignment/reject
internal timer. Rename timer array accordingly. Use defines with
explicit second/microsecond values to make it more readable.
Change-Id: I63fb7e6f0695383a83472c836a381a055f64690b
Properly reset the counter when receiving valid RLCMAC block and update
it when no data is received as per 3GPP TS 44.060 §8.1.1.1
Change-Id: I2f79c6153dc4073c9d293b2824979e6381576682
Fixes: OS#2407
Previously TBF got single timer so the pending timer was automatically
cancelled when new one was scheduled. Let's make it more robust by
implementing independent T31 xx timers from 3GPP TS 44.060 §13.2 with
corresponding start/stop functions and counters.
The semantics of the timers is preserved as before: pending timers are
restarted unconditionally. It might be neecessary to change this later on
after spec review.
N. B. T0: used for assign/reject timeouts, have to be properly
attributed and documented first.
Change-Id: I0305873ca47534f53441247217881da59625e1f7
Related: OS#2407
When troubleshooting complex issues with TBF lifecycle, it's much easier
to follow the logs which are consistently formatted. Add LOGTBF*() macro
similar to struct-specific log routines we use in other Osmocom project
and use it to log TBF-related messages in a unified way. Tweak test
output accordingly.
Related: OS#2407
Change-Id: I388249afefc32d2f6e5cb5e5abc6daf4dbd284ea
Recent change lin libosmocore disallow registering rate_ctr with the
same name and indexing multiple times. To accommodate to this check if
rate counters arealready allocated (by static allocator of BTS singleton
for example) and register rate counter with different index.
This fixes the tests for now but eventually we'll remove the BTS singleton
which will allow us to remove this hack.
Change-Id: I7c552ce653b44ec3a31049641728926adc07361d
Related: OS#2757
* log timer values
* log start/stop cause
* update test output as necessary
This simplifies debugging issues with TBF timers.
Related: OS#2407
Change-Id: Ib8e537416af9bec5d447356286f44e9e8bbf1b7a
The '.' is an illegal character in counter names, as they are exported
via CTRL interface, where '.' has a special meaning that cannot be used
by strings comprising the variable name.
Change-Id: I5ef60152a31dea25cb839c47edc93d5337ec3a3e
Promblem:
TA provided from L1 PH-DATA-IND is a relative amount of TA adjustment to actual TA
being used for given TBF. The current TA update algorithm in PCU simply applies the relative
amount of TA to given TBF but does not take into account of current TA.
As a result, the PCU will request wrong TA jump for given TBF if the MS is moving away from
BTS more than 2 km.
Related issue: http://osmocom.org/issues/2611
Fixes:
- The PCU needs increase or decrease current TA of given TBF on receiving of relative
amount of TA adjustment provided by PH-DATA-IND from L1
- The PCU needs to set absolute TA of given TBF on receiving absolute TA provided by
PH-RA-IND from L1.
Change-Id: I65212f8203f1a35278890f51db038d689b2493d5
The BTS constructor uses functions of libosmocore that could in turn
want to log something. This requires the logging to be initialized
before.
The only way to achieve this is to add an __attribute__((constructor))
function *before* the BTS constructor is being run.
This solution might not be elegant, but I guess it's the only way to
initialize a C library before calling C++ constructors of global static
instance of a class.
In case anyone comes up with a better / cleaner approach, we can always
change later.
This change requires libosmocore >= 0.10.1, as only that permits
multiple calls to osmo_init_logging() which may now occur.
Change-Id: I28dc4f0db229518348c92413959fed5ae85d753d
We do not use this style (#warning as an issue tracker replacement) in
any other Osmocom project. Also those warnings clutter compiler output
making it harder to spot warnings for the actual code.
Change-Id: I72070e2a027e60e8b80c12ccfa23ff075434689f
* introduce enum describing poll kind and use it in set_polling()
* move state change into set_polling()
* move logging into set_polling() and unify output
* move duplicated code into static function
* adjust tests to match unified logging output
Change-Id: I14074207f8bbc18b3ebd60875bb99a0a3a4b399d
Related: OS#1524
This function does not really belongs to BTS and it heavily relies on
direct access to TBF-DL members anyway.
Change-Id: I04584103018675a2f35cfb565473bfd81a208d7c
Closes: OS#1540
* separate channel request responder into inline function
* move generic TBF poll check into inline function
Change-Id: I9ec3ab8de100f0bc75044f55ac769d1083d52806
Related: OS#1539
When looking at GSMTAP output so far, one is easily overwhelmed by way
too much information being presented. A lot of is consists of DUMMY
frames, which are probably of lowest interest, ever.
A concept similar to the "gsmtap-sapi" of OsmoBTS is introduced, by
which the user can configure which particular categories (uplink or
downlink control or data, gprs or egprs, ...) he actually wants to
see in his logs.
Change-Id: I297183690e98a7234dfc1608c18847d8981306e4
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
Change-Id: Id6d780c67b4af15aaa5c6f2b8b00f2a0b70a7385
Related: OS#2361
Do not access TBF internals directly from rcv_control*dl_ack_nack() -
wrap corresponding code into TBF-DL method.
Change-Id: I3d1b5782001e45617b4a960612fcfc249904b37c
Related: OS#1539
Fix error introduced in 1275a3f91a by
using signed 32 bit integer which is enough for Frame Number in
GSM. Also, mark parameter constraints more explicitly:
- add assert for expected FN values
- don't perform computation for non-relative FN
The error was:
bts.cpp: In member function ‘uint32_t BTS::rfn_to_fn(uint32_t)’:
bts.cpp:554:25: error: call of overloaded ‘abs(uint32_t)’ is ambiguous
if (abs(rfn - m_cur_rfn) > RFN_THRESHOLD) {
^
In file included from /usr/include/c++/6/cstdlib:75:0,
from /usr/include/c++/6/stdlib.h:36,
from /usr/include/osmocom/core/linuxrbtree.h:97,
from /usr/include/osmocom/core/timer.h:35,
from ./bts.h:29,
from bts.cpp:21:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
^~~
In file included from /usr/include/c++/6/stdlib.h:36:0,
from /usr/include/osmocom/core/linuxrbtree.h:97,
from /usr/include/osmocom/core/timer.h:35,
from ./bts.h:29,
from bts.cpp:21:
/usr/include/c++/6/cstdlib:185:3: note: candidate: __int128 std::abs(__int128)
abs(__GLIBCXX_TYPE_INT_N_0 __x) { return __x >= 0 ? __x : -__x; }
^~~
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
abs(long long __x) { return __builtin_llabs (__x); }
^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
abs(long __i) { return __builtin_labs(__i); }
Change-Id: Ib6d895a97aa35414f245ea4406c6e78f1b4fb5b8
The implementation of the method rcv_rach() in class BTS, restores
the absolute frame number of the incoming RACH-Request by using
the relative frame number (RFn = Fn mod 42432) from the rach
request and the already known internal absolute frame number
m_cur_fn, which is continusly updated by the CCU interface.
In some rare cases, a RACH request might be received by the BTS,
a very short time before the frame number wraps in its 42432.
Depending on the PCU location, RACH request might be received
by the BSC, which forwards it to the PCU. It is then likely
that, while the RACH request is being forwarded to the PCU, the
PCU internal absolute frame number wraps before the RACH
can be processed. The relative frame number from the rach
request would then be interpreted as if it were received after
the wrapping of the internal frame number modulos.
This commit adds logic to detect and resolve this race condition.
Also a unit test is added to check some cornercases.
Change-Id: I74f00c11e5739d49f370ce6c357149e81d9aa759
The rach request contains a relative frame number (Fn % 42432),
while BTS::rcv_rach() accepts the full frame number only.
Since the BTS is always aware of the full frame number this is
not a problem. But for BSC co-located PCU schemes it is a problem
since the rach request only contains the relative frame number
as mentioned above.
The pcu continusly receives frame number updates with the GSM time
indication message. It is simple to re-calculate the full frame
number from that information.
This patch makes BTS::rcv_rach() compatible with relative frame
numbers, while not breaking the compatibility for full frame
numbers
Change-Id: Iaa182d8d29c6a0f5fa06064c2eb48b21b1ba2775
When Packet resource request is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
Adds spb counters at BTS level(show bts statistics).
Adds RLC/MAC downlink control msg at ms level(show ms imsi <imsi_val>).
Adds the number of coding schemes counter for UL at TBF level.
Change-Id: Icbe4ba95e34bea89ee36f532d099db68204b7c38
When PDAN/EPDAN with channel description is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
When RACH is received, PCU will generate the Immediate assignment reject
message if no resources are present. The encoding is done based on section
9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the
test case to validate the generated Immediate assignment reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
Separate qbit-TA to TA conversion into separate function and use it for
computing and updating Timing Advance.
Note: the code was tested with TA=0 only to make sure it does not
introduce regressions.
Change-Id: I96fdbb20b09fb85fdd9fb6dcf3c25f6bee7f80e4
Fixes: OS#1531
This reverts commit f1a7b8fc66.
Conflicts:
tests/tbf/TbfTest.err
The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002
with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e).
The error observed is the following log output (was viewing both osmo-bts-sysmo
and osmo-pcu logs interleaved):
<0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission
<0002> tbf.cpp:893 - Assignment was on CCCH
<0002> tbf.cpp:899 - No uplink data received yet
<0007> l1sap.c:904 RACH for packet access
<0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653
[repeat]
When removing this single commit from current osmo-pcu master, GPRS service
works well on SysmoBTS, with current osmo-bts master.
The TbfTest.err expected output needed adjustment after the revert.
Disclaimer: I am not aware of adverse effects this commit may have. I have no
idea what the WAIT_ASSIGN state is used for -- further review is required.
Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
Encode the EGPRS fields of immediate assignment message in uplink
when EGPRS PACKET CHANNEL REQUEST (11 bit RACH) is received.
The series of patches for 11 bit RACH are dependent on libosmocore
and osmo-bts patches for 11 bit RACH.
Change-Id: Ie5e309156e5dbbb6add74a1b4d257c4ee2332e52
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
Interface structure between osmo-bts and osmo-pcu is updated with
the parameters to differentiate the type of RACH and further
support 11 bit RACH. The function prototype and definitions are
changed accordingly. Interface version number is increased.
Change-Id: I265c2d92d36d6cbcbeee60cdd8407dafe1da06a4
Since we are supporting MCS 5-9 in this patch series for EGPRS UL,
This condition is not relevant. So removing it.
Change-Id: I567acc012d8ad49681715f0104ba7e91625e1e7a
Reviewed-on: https://gerrit.osmocom.org/268
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Conform to the convention.
Change-Id: I6162694aae8d354aba318cc1acfdac108239fef0
Reviewed-on: https://gerrit.osmocom.org/103
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Use tabs like other counters for seperation.
Introduced by 2cb1547
Change-Id: I32eebfe5934c919eccc1e28938ca00c49368297e
Reviewed-on: https://gerrit.osmocom.org/96
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
rlc_sent_dummy count the amount of dummy package which are
sent in case no data packet is in the queue.
Change-Id: Ia60eab853d9145980f30d63e4ce4b520b8c51381
Reviewed-on: https://gerrit.osmocom.org/85
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
Currently the TBF whose PACCH has been used to send an assigment
is freed if it is in state WAIT_RELEASE. Sometimes this TBF could
be used for several assignments (e.g. an 'old' DL TBF is used to
assign an UL and then a DL TBF). The second of these assigments will
never be sent in that case. On the other hand, the MS replaces a
TBF of the same direction, so the old one can be freed in that case.
Only free the TBF if it is in state WAIT_RELEASE and has the same
direction like the new one.
Sponsored-by: On-Waves ehf
The EGPRS support will need more information to encode the IMMEDIATE
ASSIGMENT. Instead of adding more parameters pass a pointer to the
TBF unless an SBA shall be done (indicated by tbf == NULL). All
values that can be derived from the TBF and are not needed for an SBA
are removed from the parameter list.
Return a negative value on error.
Sponsored-by: On-Waves ehf
Currently the CCCH flag is cleared and the PACCH flag is set when a
multislot upgrade is scheduled for a downlink TBF, even if the MS has
never confirmed in any way that the PACCH really exists. This can
happen if the MS did not receive the DL IMM.ASS. Since the CCCH flags
gets cleared in that case, the IMM.ASSS is never retried and all
subsequent PACKET DOWNLINK ASSIGNMENTS will fail.
This commit delays the update of these flags until the MS has
responded with a corresponding CONTROL ACK.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently existing TBF can be reused after an MS has sent a RACH
request. Since the MS can be or most probably is in packet idle mode
in that case, the TBF are no longer usable even if they share the
PDCHs and the control TS with the new one.
There are occasional freezes where the MS does no longer react to
messages sent on the PACCH.
This change aborts all pending TBFs if a new TBF is or has been
established via RACH.
Sponsored-by: On-Waves ehf
According to spec, the lowest numbered PDCH of the TBF shall be used
for the PACCH, only when concurrent TBF are active, the lowest common
PDCH shall be used. An immediate assigment is in general only sent,
if no TBF is active, so the latter case never applies.
This reverts commit fdd8a1ba2312be3f33576ee994c0b5da6272e815.
Make use of variables, log them to LOGL_DEBUG, and reduce code
duplication.
This should help to narrow down the cause why snd_dl_ass are not
answered by the MS sometimes.
Sponsored-by: On-Waves ehf
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
Currently this message is ignored.
Support decoding and handling of this message. Use a bitvec for the
decoder that just represents a BSN sequence without any encoding
details (first bit -> first BSN). Return the corresponding BSN range
(snsmod(bsn_begin + bits_in_bitvec) = bsn_end), so snsmod(bsn_end-1)
is the last BSN if there is at least 1. If bsn_begin == bsn_end, no
BSNs has been added.
Note that this bitvec is not yet used for RBB handling. It just calls
the old rcvd_dl_ack with a faked (all bits are 1) RBB map.
Sponsored-by: On-Waves ehf
Currently the RLC message length that is obtained from the DSP is
reduced by 1 if the last byte of the buffer includes spare bits.
While this worked well with GPRS, these bits are being used to
encode RLC blocks in EGPRS mode. Thus this last byte must not be
chopped off. The functionality of the code is not affected by this,
since the modified length value is not used.
This commit adds GprsCodingScheme::usedSizeDL/UL to return
the number of bytes needed to encode the message block. If there are
single bits at the end that are to be used (EGPRS), the functions
return the number of full bytes plus 1 (which is the buffer size
reported by the DSP and returned by sizeUL/sizeDL). The commit also
removes the len parameter from rcv_data_block_acknowledged.
Sponsored-by: On-Waves ehf
These struct names are more specific than necessary. They are used
for GPRS (uplink) already. In downlink direction, only a few fields
will be added to the header struct. Add addition,
gprs_rlc_ul_header_egprs does not map directly to an encoded
header, like many other 'header' structs do.
Change the names to fit both modes and both directions:
gprs_rlc_ul_header_egprs -> gprs_rlc_data_info
gprs_rlc_ul_data_block_info -> gprs_rlc_data_block_info
Sponsored-by: On-Waves ehf
LListHead does basically the same like llist_pods, but more C++ish
and with type safety.
This commit turns the former list field of gprs_rlcmac_tbf into a
private field, provides accessors, moves the related code from
pcu_vty.c to pcu_vty_functions.cpp, and removes the llist_pods
type and related code.
Sponsored-by: On-Waves ehf
Currently casts from gprs_rlcmac_tbf to gprs_rlcmac_ul_tbf and
gprs_rlcmac_dl_tbf are done by using static_cast. This doesn't provide
protection against converting a gprs_rlcmac_ul_tbf pointer to a
gprs_rlcmac_dl_tbf pointer and vice versa.
This commit provides two functions as_ul_tbf and as_dl_tbf, that
behave similar like dynamic_cast but use the direction field instead
of RTTI.
Sponsored-by: On-Waves ehf
ASAN has found improper deletion of objects. These only occur
on shutdown but makes it impossible to run the test cases with
full ASAN support.
This commit fixes some of them and deactivates the freeing of the_pcu.bctx
which may cause a corruption in BTS::~BTS() later on.
Note that the latter is only a work-aound and should be fixed
properly. It will leak bctx objects, but this is currently not
critical, since gprs_bssgp_destroy is only called once, immediately
before a call to exit().
Ticket: OW#1572
Sponsored-by: On-Waves ehf
This commit removes the code that is no longer used due to the commit
"Use a single PDCH rcv_data_block method for GPRS and EGPRS".
Sponsored-by: On-Waves ehf
Currently GPRS is handled by the old code path while EGPRS already
uses the unified functions. The rcv_block_egprs is basically not
specific to EGPRS and just needs minor modifications to handle GPRS.
This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified
rcv_data_block method and uses it for GPRS, too.
Note that the logging messages of the new parser are different.
Sponsored-by: On-Waves ehf
Pau Espin
Oliver Smith
Eric Wild
Thorsten Alteholz
Harald Welte
Philipp Maier