This adds compression of bitmap in PUAN. The compressed bitmap
is used only if the number of bits in the bitmap does not fit in
the message and there is a gain after compression.
The algorithm is part of libosmocore and so there is dependency
on the libosmocore for compilation.
The algorithm is tested on integration setup by forcing compression.
Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
Add value_string describing UL and DL TBF states and use it for logging
errors while freeing TBFs.
Change-Id: I292ec81ab602c65ef86e6e3e85740182b63474b6
Adds spb counters at BTS level(show bts statistics).
Adds RLC/MAC downlink control msg at ms level(show ms imsi <imsi_val>).
Adds the number of coding schemes counter for UL at TBF level.
Change-Id: Icbe4ba95e34bea89ee36f532d099db68204b7c38
Adds DL throughput in show ms imsi <imsi_value>.
Adds the number of coding schemes counter and rlc nacked counter at TBf level.
Change-Id: Ia95b0404989b00db0e7ba416bc40d09ef41fde1c
When PDAN/EPDAN with channel description is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
This reverts commit f1a7b8fc66.
Conflicts:
tests/tbf/TbfTest.err
The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002
with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e).
The error observed is the following log output (was viewing both osmo-bts-sysmo
and osmo-pcu logs interleaved):
<0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission
<0002> tbf.cpp:893 - Assignment was on CCCH
<0002> tbf.cpp:899 - No uplink data received yet
<0007> l1sap.c:904 RACH for packet access
<0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653
[repeat]
When removing this single commit from current osmo-pcu master, GPRS service
works well on SysmoBTS, with current osmo-bts master.
The TbfTest.err expected output needed adjustment after the revert.
Disclaimer: I am not aware of adverse effects this commit may have. I have no
idea what the WAIT_ASSIGN state is used for -- further review is required.
Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
gcc6 is optimizing if (!this) {CODE} as this is assumed to never be a
std::nullptr here. Move the null check to the caller. In preparation of
removing the check within llc_queue->size(), all callers must check the object
before calling it. Make sure of that: make the llc_queue() access function
protected and offer only a public llc_queue_size() function that incorporates
the NULL check. All current callers are only interested in the
llc_queue_size().
Tweaked-by: nhofmeyr
Change-Id: I88cc3180f8f86785e3f07981895dabddf50b60a2
A subsequent patch needs to call this from gprs_rlcmac_tbf::update(),
so to avoid code dup, put the calculation in a separate function.
Related: OS#1808
Change-Id: I7c7777d43f843bbd3421503fc2a8600f148ca035
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
Comparing the coding scheme properties doesn't seem to be strong
enough, since create_dl_acked_block(fn, ts, index, index2) sometimes
had to combine data units of different size this way.
Check the registered size of the BSN blocks instead, since these must
match if two blocks are to be combined in a single RLC data message
with MCS7-9.
It is not yet clear, what exactly goes wrong with the current
implementation, but this commit fixes the problem which trigger the
assertion in create_dl_acked_block.
Sponsored-by: On-Waves ehf
Currently only one BSN block is encoded in each RLC data message,
even if MSC7-9 are used, which transport two independant (except for a
max BSN delta of 512) BSN blocks. In that case, the same block is
just put twice into the same message.
The current create_dl_acked_block(fn, ts) method handles
block selection (resend, new BSN, dummy block, ...) and restart
handling in one method and is too complex to extend it accordingly.
Therefore this commit move the block selection/creation handling into
a new method (take_next_bsn) which delivers the next BSN along with a
hint, whether it may be combined with another block. In that case,
the function can be called a second time (this time with a valid
previous BSN, that's the one returned by the first call) to get the
second BSN. The real block generation method
create_dl_acked_block(fn, ts, index, index2) is then called with both
BSNs as indices (the second must be -1, if there is only one BSN).
Note that every BSN returned by take_next_bsn should be passed to
create_dl_acked_block to avoid state inconsistencies.
Sponsored-by: On-Waves ehf
Currently the method is hard-coded to support a single BSN only.
MCS-7 to MCS-9 encode 2 data blocks into a single RLC data message.
This commit refactors create_dl_acked_block to process any number
of blocks internally.
Note that this does not extend the parameter list accordingly and
just duplicates the BSN if these MCS are being used.
Sponsored-by: On-Waves ehf
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
Currently the old TFI is always used as ID when a
PACKET DOWNLINK ASSIGNMENT is generated. This fails
if the old TBF has not been fully assigned yet. The
MS will then ignore the PDA.
This commit changes write_packet_downlink_assignment to accept
an additional parameter old_tfi_is_valid and uses the new TBF's
TLLI instead of the olf TFI if that parameter is set to false.
Sponsored-by: On-Waves ehf
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently there are some places where tbf->control_ts != ts is
evaluated to check, whether ts is a control slot.
Replace these expressions by tbf->is_control_ts(ts) which does
the same whitout exposing internal fields.
Sponsored-by: On-Waves ehf
Currently the checks in that function are based on the different
internal TS values of a TBF. It is assumed that they match the TS
that the current RTS refers to.
This commit adds a TS parameter to create_ul_ass, create_dl_ass,
and create_ul_ack to make this more explicit.
Sponsored-by: On-Waves ehf
Currently the is a release() function which takes care of
statistics and shutdown of properly finished TBFs, but which
cannot be used for aborted TBFs.
This commit add an abort() method which handles unacked RLC blocks
as lost and doesn't start a release timer. This method will be
invoked by tbf_free() for downlink TBF.
Sponsored-by: On-Waves ehf
The current methods are based on the GRPS specific RBB and SSN values
and formats which are not compatible with EGPRS.
Add a second set of similar methods with the same semantics but
which are based on a bitvec and the first BSN instead.
The following methods are affected:
- gprs_rlc_dl_window::update
- gprs_rlcmac_dl_tbf::rcvd_dl_ack
- gprs_rlcmac_dl_tbf::update_window
Sponsored-by: On-Waves ehf
Currently the RLC message length that is obtained from the DSP is
reduced by 1 if the last byte of the buffer includes spare bits.
While this worked well with GPRS, these bits are being used to
encode RLC blocks in EGPRS mode. Thus this last byte must not be
chopped off. The functionality of the code is not affected by this,
since the modified length value is not used.
This commit adds GprsCodingScheme::usedSizeDL/UL to return
the number of bytes needed to encode the message block. If there are
single bits at the end that are to be used (EGPRS), the functions
return the number of full bytes plus 1 (which is the buffer size
reported by the DSP and returned by sizeUL/sizeDL). The commit also
removes the len parameter from rcv_data_block_acknowledged.
Sponsored-by: On-Waves ehf
These struct names are more specific than necessary. They are used
for GPRS (uplink) already. In downlink direction, only a few fields
will be added to the header struct. Add addition,
gprs_rlc_ul_header_egprs does not map directly to an encoded
header, like many other 'header' structs do.
Change the names to fit both modes and both directions:
gprs_rlc_ul_header_egprs -> gprs_rlc_data_info
gprs_rlc_ul_data_block_info -> gprs_rlc_data_block_info
Sponsored-by: On-Waves ehf
Currently the TBF and MS object use a plain integer value
(current_cs) to manage the coding scheme. This makes it difficult to
support the MCS schemes. GprsCodingScheme supports a partial ordering
of these values (CS and MCS) and provides safe increment and
decrement methods.
Use the GprsCodingScheme type instead of integer for cs fields and
variables. Add a 'mode' to GprsMs which can be set to either GPRS,
EGPRS, or EGPRS_GMSK which also set the initial values of
current_cs_ul/dl. Select the mode based on max_mcs_ul and max_mcs_dl.
Sponsored-by: On-Waves ehf
LListHead does basically the same like llist_pods, but more C++ish
and with type safety.
This commit turns the former list field of gprs_rlcmac_tbf into a
private field, provides accessors, moves the related code from
pcu_vty.c to pcu_vty_functions.cpp, and removes the llist_pods
type and related code.
Sponsored-by: On-Waves ehf
This function is similar to the show_ms function already present in
the target file. Since the TBF lists will be turned into LListHead
based lists, they will get an iteration function in
pcu_vty_functions.cpp, too.
Sponsored-by: On-Waves ehf
Currently casts from gprs_rlcmac_tbf to gprs_rlcmac_ul_tbf and
gprs_rlcmac_dl_tbf are done by using static_cast. This doesn't provide
protection against converting a gprs_rlcmac_ul_tbf pointer to a
gprs_rlcmac_dl_tbf pointer and vice versa.
This commit provides two functions as_ul_tbf and as_dl_tbf, that
behave similar like dynamic_cast but use the direction field instead
of RTTI.
Sponsored-by: On-Waves ehf
This commit removes the code that is no longer used due to the commit
"Use a single PDCH rcv_data_block method for GPRS and EGPRS".
Sponsored-by: On-Waves ehf
The current rcv_data_block_acknowledged_gprs method is tightly
coupled to GPRS.
This commit adds variants of the involved methods that support
EGPRS and GPRS RLC encodings likewise.
Sponsored-by: On-Waves ehf
Currently gprs_rlcmac_tbf::extract_tlli takes care of decoding and
the TBF update. These are really different things and doing the
decoding in extract_tlli makes EGPRS support more complex.
This commit moves the TBF state related part into a new method
gprs_rlcmac_tbf::set_tlli_from_ul.
Sponsored-by: On-Waves ehf
This commit renames rcv_data_block_acknowledged to
rcv_data_block_acknowledged_gprs to separate it from EGPRS data block
decoding.
Sponsored-by: On-Waves ehf
The multislot (MS) class and the EGPRS MS class can also be passed
via BSSGP in an MS Radio Access Capability element which can
optionally be contained in a DL-UNITDATA PDU. While this case is fully
supported for GPRS, the EGPRS MS class in BSSGP messages is ignored.
This commit extends gprs_rlcmac_dl_tbf::handle to pass the EGPRS MS
class, too.
Note, that the EGPRS class is not yet taken from the CSN.1 RA
capability and is always set to 0. Note also, that append_data
still uses ms_class only.
Sponsored-by: On-Waves ehf
Add the following methods to gprs_rlcmac_tbf:
- is_egprs_enabled
- enable_egprs
- disable_egprs
Also show the value of the flag in name() by displaying "EGPRS" if
it is set.
Sponsored-by: On-Waves ehf
The leak rate sent to the SGSN does not reflect the current CS level,
lost frames, and control message overhead. So the SGSN cannot do
proper queue control under non-optimal conditions.
This commit computes the leak rate for the last flow control interval
by computing the maximum theoretical leak rate and basically
substracting control blocks, nacked blocks, and reduced block sizes
due to CS downgrade. By using this approach, the value will by more
stable on low load, where the value will tend to be near the value
derived from the configuration. On full load the transmitted value is
completely derived from the measurements.
Note that the MS default values are no adapted to the adapted BVC
leak rate, since a single MS which has a lower link quality would
otherwise be reducing the rate of another MS with good radio
conditions, which would not make much sense if they did not share any
PDCH.
Sponsored-by: On-Waves ehf
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
Currently when allocating tbf_alloc_ul_tbf or tbf_alloc_dl_tbf
objects, the allocated memory area is pre-initialised by talloc_zero
before the C++ constructors are called. This is not recognised by
Coverity, since there is no talloc model file yet. Thus Coverity
complains about missing initialisers.
On the other hand, it is still planned to convert the TBF classes
into real C++ ones. So instead of silencing Coverity directly, this
is an opportunity to do it the C++ way.
This commit adds initialisers and initialisation code for all
members that relied on talloc_zero. The corresponding calls to
talloc_zero are replaced by calls to talloc to give ASAN/valgrind
a chance to detect future initialisation errors. Some initialisation
code is also moved from setup_tbf to the constructors, notably the
initialisation of the bts pointer.
Fixes: Coverity CID 1320604, 1320605, 1320606
Sponsored-by: On-Waves ehf
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
The TBF object are currently created by using talloc_zero/talloc_free
directly from plain functions. Therefore C++ constructors and destructors
are not called. So the only initialisation that is done is setting
every member to 0. Non POD members do not have their constructors
called either, which makes it impossible to use the current LListHead
class for real members when the LListHead::m_back member has to be set.
This commit changes the TBF allocation functions to call the
corresponding C++ constructor after the call to talloc_zero and to
register the C++ destructor with the talloc context, so that is is
called before talloc_free actually frees the memory.
With this change, non-POD members and custom
constructors/desctructors can be used with gprs_rlcmac_tbf,
gprs_rlcmac_dl_tbf, and gprs_rlcmac_ul_tbf.
Note that this change is only a single step of the plan to turn the
TBF classes into real C++ classes.
Sponsored-by: On-Waves ehf
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
This reverts commit 2272a83a13b57ea7e99fe96ac76e4ad892e19e90.
The modification is no longer needed, since the call to update has
been removed from reuse_tbf().
Conflicts:
src/tbf_dl.cpp
Sponsored-by: On-Waves ehf
Since set_ms() is caled on the new DL TBF, the old DL TBF loses the
reference to the MS object. This will lead to a segfault, when
update() is called in reuse_tbf().
This commit adds an optional GprsMs* parameter to update() and uses it
for the slot allocation.
This fixes a TbfTest crash that would otherwise occur after applying
the next commit.
Sponsored-by: On-Waves ehf
To avoid the need for a switch or conditional statement when needing
a TBF from an MS object in direction independant code, this method
contains that case distinction. For additional flexibility, a
reverse() function is added to get the opposite direction.
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
sivasankari