In previous status, if USF for GPRS-only MS was selected, then EGPRS
TBFs were skipped and either a GPRS TBF was selected or a Dummy Block
was sent. That means the behavior was unfair towards EGPRS TBFs, because
sometimes they were skipped in favor of GPRS ones.
This patch imporves the situation in the above mentioned USF scenario, by
first, under specific conditions, allowing selection of an EGPRS TBF and
then forcing it to transmit in EGPRS-GMSK (MCS1-4) so that the
USF-targeted MS can still decode the USF, while at the same time
providing more fairness by allowing the EGPRS TBF to transmit data.
The specific conditions mentioned above are, mainly, related to the fact
that once a DL data block has been sent, and hence a BSN was assigned to
it, it cannot be retransmitted later using another MCS, since lower
MCS1-4 wouldn't be able to contain higher MCS RLC payload.
The set of conditions could be expanded in the future by also selecting
the EGPRS TBF if retransmition is required and the block to be
retransmitted was originally transmitted as MCS1-4.
Related: OS#4544
Change-Id: I9af23e175435fe9ae7b0e4119ad52fcd4707b9ca
For instance if PCU received DL data to be sent to an MS from an SGSN,
and the MS is not currently cached in the PCU (because there's no TBF
active for it), it will page it and transmit the DL data to it.
The SGSN is capable of sending (EGPRS) MS Class information in that same
DL data message, so it's the one responsible for providing that
information if not available at the PCU.
In the PCU if we don't have information about that MS and SGSN didn't
provide us information about it, we cannot assume the MS is going to be
EGPRS capable and even less expecting a specific EGPRS MS class.
So let's drop this code.
Related: OS#4544
Change-Id: Icce66cadb51af25ae0c3b3719940eccb548fe33b
If SGSN provides us with MS class information upon DL data, let's use it
and set it in an already existing MS object if not yet known.
Also remove all unneeded code passing ms_class to append_data() which
would simply try to (again) set the ms_class.
Change-Id: I4979c9344bffd3ba7657bbab94981d233eab801f
Avoid passing tons of params to internal helper function
tbf_nel_dl_assignment() in order to either fetch again the ms object or
create a new one. Let's instead create the ms function earlier if needed
and fill it with all the discovered information prior to calling the
helper function. This provides cleaner code and also better log output.
This way we also avoid trying to fill the MS twice and unneeded
getter+setter for TA.
tbf::imsi(): There' always an ms, so simply forward call to
ms()->imsi().
We can also get rid of assign_imsi, since the modified code is the only
place where it's used and there's already some code in place there to
update the MS. We instead merge it with set_imsi and keep the
duplication code to catch possible bugs from callers.
Move merge_and_clear_ms from tbf class to GprsMS, where it really
belongs.
Change-Id: Id18098bac3cff26fc4a8d2f419e21641a1f4c83b
This is another step forward towards a more clear data model where a TBF
always has a MS object (which may be lacking some information, and at a
later point when more information is found, it may actually be a
duplicated MS object and hence one duplicate removed and the TBF moved
to the object being kept).
This helps for instance in removing duplicated information stored in
the TBF which is really per MS, like ms_class, ta, etc. Since there's
always a MS object there's no need to keep a duplicate in both classes
in case there's no MS object.
It can already be seen looking at unit test logging that this kind of
data model already provides better information.
Some unit test parts were needed to adapt to the new model too.
Change-Id: I3cdf4d53e222777d5a2bf4c5aad3a7414105f14c
Return an interface to the window base class so that the tbf base class
can access the common window methods, such as set_ws(). It will be used
in next commit to get rid of duplicated function enable_egprs in both
dl_tbf and ul_tbf subclasses.
The user of the function can then decide to access more specific
functionaltiites of the window class by static casting it to the
specific direction (which is known by the caller since it operates on a
ul_tbf or a dl_tbf).
Change-Id: Ia2e1decf91be1184668e28297c2126affb9c7ae4
According to 3GPP TS 44.018 sec 10.5.2.40, Timing Advance value is 8 bit
and range is 0-63 (0-219 on GSM400). So there's no need for 16 bits to
store it. uint8_t is used in all other places in the code.
Change-Id: I38aa063ae30ca5680fef6252d2cef22cea98c123
Since commit 322456ed47 (and previous
one), it is expected that a tbf object ALWAYS has a MS object referend
to it, even if it's a temporary copy which will later be merged when
TLLI/IMSI is retrieved and it is found that several MS objects relate to
the same MS.
The purpose of set_tlli_from_ul was mainly to update TBF's ms() to
old_ms before going through usual tbf->update_ms() path. That's not
really needed since ms() is already always set and TBFs for old_ms are
already freed in update_ms() and children function.
Change-Id: Ie8795e7a02032336e53febb65c11f9150c36d2a0
We have same kind of object splitted into two layers, in coding_scheme
and gprs_coding_scheme. Let's merge them together and get rid of the
class, which is not really useful because it's only a set of functions
operating on one enum value.
This change also fixes gcc 10.1.0 error about memseting a complex type
in rlc.h init().
Change-Id: Ie9ce2144ba9e8dbba9704d4e0000a2929e3e41df
Newer gcc 10.1.0 is erroring due to memset being applied on a complex
type, so let's start by removing this only function outside of the
struct.
Change-Id: I20426557d9b3049ab275fadb92e10ea8a860a119
It's super annoying seeing lots of functions being called everywhere
only to find out they are only incrementing a counter. Let's drop all
those functions and increment the counter so people looking at code
doesn't see dozens of code paths evyerwhere.
Most of the commit was generated by following sh snippet:
"""
#!/bin/bash
define_pattern="^CREATE_COUNT_ADD_INLINE"
generic_func="do_rate_ctr_add"
grep -r -l "${define_pattern}" . | xargs cat | grep "${define_pattern}("| tr -d ",;" | tr "()" " " | awk '{ print $2 " " $3 }' >/tmp/hello
while read -r func_name ctr_name
do
#echo "$func_name -> $ctr_name";
files="$(grep -r -l "${func_name}(" .)"
for f in $files; do
echo "$f: $func_name -> $ctr_name";
sed -i "s#${func_name}(#${generic_func}(${ctr_name}, #g" $f
done;
done < /tmp/hello
grep -r -l "void ${generic_func}" | xargs sed -i "/void ${generic_func}(CTR/d"
grep -r -l "$define_pattern" | xargs sed -i "/$define_pattern/d"
"""
Change-Id: I966221d6f9fb9bb4f6068bf45ca2978008a0efed
It's super annoying seeing lots of functions being called everywhere
only to find out they are only incrementing a counter. Let's drop all
those functions and increment the counter so people looking at code
doesn't see dozens of code paths evyerwhere.
Most of the commit was generated by following sh snippet:
"""
#!/bin/bash
grep -r -l ^CREATE_COUNT_INLINE . | xargs cat | grep "^CREATE_COUNT_INLINE("| tr -d ",;" | tr "()" " " | awk '{ print $2 " " $3 }' >/tmp/hello
while read -r func_name ctr_name
do
#echo "$func_name -> $ctr_name"
files="$(grep -r -l "${func_name}()" .)"
for f in $files; do
echo "$f: $func_name -> $ctr_name";
sed -i "s#${func_name}()#do_rate_ctr_inc(${ctr_name})#g" $f
done;
done < /tmp/hello
grep -r -l "void do_rate_ctr_inc" | xargs sed -i "/void do_rate_ctr_inc(CTR/d"
grep -r -l "CREATE_COUNT_INLINE" | xargs sed -i "/^CREATE_COUNT_INLINE/d"
"""
Change-Id: I360e322a30edf639aefb3c0f0e4354d98c9035a3
We should really be using monotonic clock in all places that
gettimeofday is used right now. Since clock_gettime() uses timespec,
let's move all code to use timespecs instead to avoid having to convert
in several places between timespec and timeval.
Actually use osmo_clock_gettime() shim everywhere to be able to control
the time everywhere from unit tests.
Change-Id: Ie265d70f8ffa7dbf7efbef6030505d9fcb5dc338
As seen in OS#4420, setting the MetaInfo.recv_time outside of
llc_queue before calling llc_queue::enqueue() and later on using that
value in llc_queue itself at dequeue time is not a good idea, since it
can provoke errors if the recv_time was not set correctly.
For instance, LlcTest was not setting the value for recv_time on some
test, which ended up with a huge millisec value when substracting now()
from it:
"""
llc.cpp:215:29: runtime error: signed integer overflow: 1582738663 * 1000 cannot be represented in type 'long int'
"""
This issue only appeared when started building on a raspberrypi4.
Let's better set/store the MetaInfo.recv_time internally during
llc_queue::enqueue(). Then, enqueue() only needs the
MetaInfo.expire_time, so let's change its arg list to only receive that
to avoid confusions.
Take the chance to move the llc_queue APIs to use osmo_gettimeofday,
since we need to fake the time now that the API itself sets that time.
Also take the chance during this refactor to disallow passing null
pointer by default since no user needs that.
Finally, update the LlcTest accordingly with all API/behavior changes.
Related: OS#4420
Change-Id: Ief6b1464dc779ff22adc2b02da7a006cd772ebce
This will allow for configuration of some of the timers by the user,
and allow him to inspect current values being used.
It will be also useful for TTCN3 tests which may want to test some of
the timers without having to wait for lots of time.
Timers are splitted into 2 groups: BTS controlled ones and PCU controlled
ones. The BTS controlled ones are read-only by the user (hence no
"timer" VTY command is provided to change them).
TbfTest.err output changes due to timers being set up correctly as a
consequence of changes. Other application such as pcu_emu.cpp and
pcu_main.cpp had to previosuly set the initial values by hand (and did
so), but apparently TbfTest.c was missing that part, which is now fixed
for free.
Depends: libosmocore.git Id56a1226d724a374f04231df85fe5b49ffd2c43c
Change-Id: I5cfb9ef01706124be262d4536617b9edb4601dd5
Since [1], OsmoPCU already starts to retransmit downlink blocks before
the MS has had a chance to receive them and/or send the related
acknowledgement in uplink. Make this optional with the new VTY option
"no dl-tbf-preemptive-retransmission".
[1] e25b5b91f6 ("tbf: Only create dummy frames if necessary")
Related: OS#2408
Change-Id: Id08aed513d4033aa0d4324c6ce07cbb2852f2f92
In 3GPP TS 44.060 the selection of MCS for retransmissions is defined as
separate tables (8.1.1.1 and 8.1.1.2) depending on the value of
resegmentation bit (which is opposite to the way EGPRS_ARQ are defined
in the source code). Let's follow the same idea and explicitly check for
resegmentation bit value and use separate tables. This also makes it
easier to add proper support for special cases (MCS-6-9 and MCS-5-7) and
padding in future independently for different ARQ types. The code is
also moved to c to avoid unnecessary conversions to and from cpp class.
Change-Id: Ia73baeefee7a58834f0fc50e3b8bf8d5e3eb7815
* use enum CodingScheme directly instead of converting it to class and
back
* drop useless mode check
* log errorneous update attempt
Change-Id: I763136c2f356d63aa3d28d09c57fd5faf5336258
In preparation for Channel Coding Command encoder in follow-up patches
let's add necessary helpers. Those are similar to previously used
helpers from GprsCodingScheme class but without CamelCase and with less
typo chances between Gprs and Egprs cases.
Change-Id: I6699cbc8d7ae766fa4d2b3d37e5f9ff1cf158b7e
Move functions which compute number of blocks or bits depending on
header type and corresponding enum outside of GprsCodingScheme
class. This will allows us to use standard libosmocore value_sting
functions in upcoming patches for IA Rest Octet encoding/decoding.
Change-Id: Id0873f85e1f16a72e17e7fbc4ad76b194917067f
Move generic MCS enum to C header file to simplify further modifications
to GprsCodingScheme class in follow-up patches. This also allows us
to use standard libosmocore value_sting functions in upcoming patches
for IA Rest Octet encoding/decoding.
Related: OS#3014
Change-Id: I993b49d9a82b8c7ad677d52d11003794aeabe117
* store N310* counters in shared array similar to corresponding timers
* add functions to increment/reset counters
This avoids direct access to TBF counters from PDCH.
Change-Id: I8ffff9c7186f74bde7e6ac5f6e98f0b3e4c35274
Related: OS#1539
Many files include unnecessary headers and don't include headers which
are actually used. Because of that combined with the fact that OsmoPCU
is a mixture of C and C++, it makes it hard to modularize code. Fix
this (using iwyu [1] tool):
* add missing headers
* remove unused headers
[1] https://include-what-you-use.org/
Related: OS#1539
Change-Id: I8c9f488a43b099c72b2d30d3245e7ba50872fc00
* add function to set/unset given assignment type
* log assignment type flag changes
* update tests output with additional logs
This enables us to carefully track the TBF assignment type transitions.
Change-Id: I3fe9d52472be8b7f257e8326b2f84e8e7d7bd1f4
Related: OS#1759
* drop unused parameters (from both functions and structs)
* document used parameters and return values
* tighten types used for parameters
* use consistent formatting
Tests are adjusted accordingly but test results are left untouched to
avoid regressions.
Change-Id: I39d81ab64ff790b9c4c2d0312a574485cd83e755
Related: OS#2282
* add functions/macros for setting TBF's poll state
* add function for checking TBF's poll state
Change-Id: I6db1c4e7bd0a49aeb5e391afe371c36b96c6a702
Related: OS#1539
* add functions/macros for setting TBF's UL/DL state
* add functions for checking TBF's UL/DL state
* move pre-free check into separate function
N. B: this should not be confused with TBF-UL or TBF-DL state.
Change-Id: Idcbf5775d17b1247f2ed01788f9b0788ce66e871
Related: OS#1539
Previously all TBF-related events were logged as part of DRLCMAC which
is too broad to make it practically useful due to excessive amount of
log messages generated. Introduce dedicated log categories for
TBF-related events. Adjust test output as necessary.
Change-Id: I64d660e5971263d5c63d2ba95d50625c16a594aa
We use the same approach for osmo_fsm: when state transition happens,
it's not very useful to always log the transition function itself, it's
much more useful to see where the actual transition comes from.
Change-Id: I348ba89bdda2b44c7019e9c893c764ee08c80bec
Related: OS#1759
Move actual calculation into shared function and use it to set window
size for TBF. TBT test output requires cosmetic adjuestements due to
extended debug output.
Change-Id: Ib9f4a277082da3c71007f5f3b4f2acac8b994540
Related: OS#1759
The UL and DL TBF use different classes implementing window
management. Hence it's better to use it explicitly instead of using the
common window management superclass inside common TBF superclass. While
at it, also remove the direct access to window class - use accessor
functions instead.
Related: OS#1759
Change-Id: I0b55aa8947db65f7206adcf53ea32b74a831d9e6
* introduce generic function to check whether particular flag was set
for'a TBF and clear it if necessary. Use this instead of
clear_poll_timeout_flag()
* add function to explicitly set assignment and appropriate state flags
Overall this makes the code easier to read and debug.
Related: OS#1759
Change-Id: Ic4560280c72f91700f2e19c6c7f6658dc29625c2
* use appropriate types for coding scheme parameters
* add comment regarding possible number of RLCMAC blocks
The code in create_dl_acked_block() has underlying assumption that
rlc.num_data_blocks can never be more than 2, which is true and is
enforced by appropriate asserts but is not obvious when looking at the
function code alone. It's equally hard for Coverity which leads to false
positives in scan.
Lets' make this assumption explicit by putting it into for(;;) condition
alongside with corresponding comment.
Fixes: CID143070
Change-Id: If599a6c8a6ef56d847604fcf41bb71decccd8a78
When troubleshooting TBF timers we're not only interested in timer
duration but also in the code which triggered it. Let's use LOGPSRC to
log it: wrap t_start() in a macro for convenience.
Change-Id: If5f883ae52c469e5158bad24da9904fdc455582f
Related: OS#2407
Use generic timer handling infrastracture to handle assignment/reject
internal timer. Rename timer array accordingly. Use defines with
explicit second/microsecond values to make it more readable.
Change-Id: I63fb7e6f0695383a83472c836a381a055f64690b
Previously TBF got single timer so the pending timer was automatically
cancelled when new one was scheduled. Let's make it more robust by
implementing independent T31 xx timers from 3GPP TS 44.060 §13.2 with
corresponding start/stop functions and counters.
The semantics of the timers is preserved as before: pending timers are
restarted unconditionally. It might be neecessary to change this later on
after spec review.
N. B. T0: used for assign/reject timeouts, have to be properly
attributed and documented first.
Change-Id: I0305873ca47534f53441247217881da59625e1f7
Related: OS#2407
When troubleshooting complex issues with TBF lifecycle, it's much easier
to follow the logs which are consistently formatted. Add LOGTBF*() macro
similar to struct-specific log routines we use in other Osmocom project
and use it to log TBF-related messages in a unified way. Tweak test
output accordingly.
Related: OS#2407
Change-Id: I388249afefc32d2f6e5cb5e5abc6daf4dbd284ea
* log timer values
* log start/stop cause
* update test output as necessary
This simplifies debugging issues with TBF timers.
Related: OS#2407
Change-Id: Ib8e537416af9bec5d447356286f44e9e8bbf1b7a
We do not use this style (#warning as an issue tracker replacement) in
any other Osmocom project. Also those warnings clutter compiler output
making it harder to spot warnings for the actual code.
Change-Id: I72070e2a027e60e8b80c12ccfa23ff075434689f
* introduce enum describing poll kind and use it in set_polling()
* move state change into set_polling()
* move logging into set_polling() and unify output
* move duplicated code into static function
* adjust tests to match unified logging output
Change-Id: I14074207f8bbc18b3ebd60875bb99a0a3a4b399d
Related: OS#1524
This function does not really belongs to BTS and it heavily relies on
direct access to TBF-DL members anyway.
Change-Id: I04584103018675a2f35cfb565473bfd81a208d7c
Closes: OS#1540
In commit 9399046729 the lookup by
TLLI, TLLI-OLD and IMSI has been implemented, but the corresponding
compile-time warning was never removed.
Change-Id: I7a1767bc7cab01048e851fd4e63112bc676d6c78
Do not access TBF internals directly from rcv_control*dl_ack_nack() -
wrap corresponding code into TBF-DL method.
Change-Id: I3d1b5782001e45617b4a960612fcfc249904b37c
Related: OS#1539
Solves a sanitizer issue where punct2 is unset when passed to
gprs_rlc_mcs_cps() and thus takes a value not defined in the enum.
Change-Id: I004cbbab15e6ffa2749f4b7f1df651517c2ae693
Adds spb counters at BTS level(show bts statistics).
Adds RLC/MAC downlink control msg at ms level(show ms imsi <imsi_val>).
Adds the number of coding schemes counter for UL at TBF level.
Change-Id: Icbe4ba95e34bea89ee36f532d099db68204b7c38
Adds DL throughput in show ms imsi <imsi_value>.
Adds the number of coding schemes counter and rlc nacked counter at TBf level.
Change-Id: Ia95b0404989b00db0e7ba416bc40d09ef41fde1c
Fix alignment of EPDAN outside the RLC transmit window,
according to section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7.
The specification explains that a bit within the uncompressed bitmap
whose corresponding BSN is not within the transmit window shall be
ignored. Without this fix PCU was dropping the EPDAN message and not
updating the status of BSNs which are inside the RLC window. This patch
updates the status of the BSNs which are inside the window and ignores
the remaining bits.
Related: OS#1789
Change-Id: Id07d178970f168f5389016c1eea31eb6b82057b6
gcc6 is optimizing if (!this) {CODE} as this is assumed to never be a
std::nullptr here. Move the null check to the caller. In preparation of
removing the check within llc_queue->size(), all callers must check the object
before calling it. Make sure of that: make the llc_queue() access function
protected and offer only a public llc_queue_size() function that incorporates
the NULL check. All current callers are only interested in the
llc_queue_size().
Tweaked-by: nhofmeyr
Change-Id: I88cc3180f8f86785e3f07981895dabddf50b60a2
A subsequent patch needs to call this from gprs_rlcmac_tbf::update(),
so to avoid code dup, put the calculation in a separate function.
Related: OS#1808
Change-Id: I7c7777d43f843bbd3421503fc2a8600f148ca035
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
Modify the existing data structure to support ARQ-II for Retx in EGPRS DL.
This will also hadle compilation issue related to renaming the variable.
Change-Id: I734b1024bb32f2daa43af4adf59f4a17f2294afe
It makes no sense to call functions on null pointer object. Use
the name of the old tbf.
Change-Id: I93b8c07a0b2de40a11e94fd6c212897cbe3b50ef
Reviewed-on: https://gerrit.osmocom.org/212
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
The counter rlc_sent has nothing to do with the TBF.
The RLC packet got sent in the gprs_rlcmac_sched().
Change-Id: I5d2b910ea7cc250f17530406eda3be9b29b051fd
Reviewed-on: https://gerrit.osmocom.org/84
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Adds support to find the puncturing scheme for retransmission
with MCS change, retransmission with no MCS change, transmission
case. Puncturing scheme selection for retransmission case with
MCS change is aligned with TS 44.060 9.3.2.1. Puncturing scheme
selection for retransmission without MCS change, fresh transmission
is aligned with TS 44.060 10.4.8a.3.1, 10.4.8a.2.1, 10.4.8a.1.1
Currently single BSN blocks of size 68 (a single unit from MCS-8)
are put into a MCS-6 block with padding according to TS 44.060
Annex J. Unfortunately, these packets are ignored by the E71. This
might be related to the currently incorrect usage of the puncturing
schemes and the RSB bit (the puncturing schemes are not updated and
the RBS flag is never set).
Avoid downgrading from MCS-8 to MCS-6 if there is no second block
available. Send the block twice instead.
Sponsored-by: On-Waves ehf
Comparing the coding scheme properties doesn't seem to be strong
enough, since create_dl_acked_block(fn, ts, index, index2) sometimes
had to combine data units of different size this way.
Check the registered size of the BSN blocks instead, since these must
match if two blocks are to be combined in a single RLC data message
with MCS7-9.
It is not yet clear, what exactly goes wrong with the current
implementation, but this commit fixes the problem which trigger the
assertion in create_dl_acked_block.
Sponsored-by: On-Waves ehf
Currently only one BSN block is encoded in each RLC data message,
even if MSC7-9 are used, which transport two independant (except for a
max BSN delta of 512) BSN blocks. In that case, the same block is
just put twice into the same message.
The current create_dl_acked_block(fn, ts) method handles
block selection (resend, new BSN, dummy block, ...) and restart
handling in one method and is too complex to extend it accordingly.
Therefore this commit move the block selection/creation handling into
a new method (take_next_bsn) which delivers the next BSN along with a
hint, whether it may be combined with another block. In that case,
the function can be called a second time (this time with a valid
previous BSN, that's the one returned by the first call) to get the
second BSN. The real block generation method
create_dl_acked_block(fn, ts, index, index2) is then called with both
BSNs as indices (the second must be -1, if there is only one BSN).
Note that every BSN returned by take_next_bsn should be passed to
create_dl_acked_block to avoid state inconsistencies.
Sponsored-by: On-Waves ehf
Currently the method is hard-coded to support a single BSN only.
MCS-7 to MCS-9 encode 2 data blocks into a single RLC data message.
This commit refactors create_dl_acked_block to process any number
of blocks internally.
Note that this does not extend the parameter list accordingly and
just duplicates the BSN if these MCS are being used.
Sponsored-by: On-Waves ehf
The offsets of the data areas change when padding is used (see TS
44.060, 9.3.2.1 and Annex J for details).
Extend the parameter lists to pass the with_padding flag and use
that information to compute the correct offsets.
Sponsored-by: On-Waves ehf
Currently only header type 3 (MCS-1 to MCS-4) is supported.
Add header structs to rlc.h and extend
Encoding::rlc_write_dl_data_header accordingly.
Sponsored-by: On-Waves ehf
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently there are some places where tbf->control_ts != ts is
evaluated to check, whether ts is a control slot.
Replace these expressions by tbf->is_control_ts(ts) which does
the same whitout exposing internal fields.
Sponsored-by: On-Waves ehf
Currently the is a release() function which takes care of
statistics and shutdown of properly finished TBFs, but which
cannot be used for aborted TBFs.
This commit add an abort() method which handles unacked RLC blocks
as lost and doesn't start a release timer. This method will be
invoked by tbf_free() for downlink TBF.
Sponsored-by: On-Waves ehf
Currently the values in the BSSGP RA Cap IE are eventually use
overwrite the 'good' values obtained from the MS earlier.
Use the 'good' values when the are present, which is assumed if
at least one of ms->ms_class() or ms->egprs_ms_class() is set.
Sponsored-by: On-Waves ehf
The bitvec RBB is always valid, even when FINAL_ACK_INDICATION is
set. This is done by the ack/nack decoder function which fake a
bitmap starting with V(A) up to V(S)-1 in that case (see
Decoding::handle_final_ack).
Call gprs_rlcmac_dl_tbf::update_window unconditionally and only use
is_final for logging and TBF state changes in
gprs_rlcmac_dl_tbf::rcvd_dl_ack.
Sponsored-by: On-Waves ehf
The current methods are based on the GRPS specific RBB and SSN values
and formats which are not compatible with EGPRS.
Add a second set of similar methods with the same semantics but
which are based on a bitvec and the first BSN instead.
The following methods are affected:
- gprs_rlc_dl_window::update
- gprs_rlcmac_dl_tbf::rcvd_dl_ack
- gprs_rlcmac_dl_tbf::update_window
Sponsored-by: On-Waves ehf
Pau Espin
Alexander Couzens
Oliver Smith
Harald Welte
Neels Hofmeyr