This patch adds a test case test_2_consecutive_dl_tbfs which
expects a current bug with TS allocation for 2nd DL TBF.
The test's expectation is corrected along with the bug fix in a
subsequent commit
Related: OS#1792
Change-Id: I890e4fbb2b64037e051433e70082a197e2a929a6
Fix attempted read past vector boundaries in case of a starting bit offset !=
0, so that the last amount of bits read should be < 8. In the case of
CSN_LEFT_ALIGNED_VAR_BMP, the mod-8 calculation was flawed, and in the final
step, 8 bits were read instead of the remainder < 8. This lead to -EINVAL being
returned by bitvec_get_bit_pos() and bogus resulting data.
Instead, read 8 bits only as long as at least 8 bits remain, and read any
remaining bits < 8 in a final step. Drop unneeded nB1 variable and an obvious
comment.
Adjust the unit test assertion in testCsnLeftAlignedVarBmpBounds() in
RLCMACTest.cpp.
Based on a fix by Aravind Sirsikar <Arvind.Sirsikar@radisys.com>, but
implemented differently.
Related: OS#1805
Change-Id: I490498c8da6b531f54acb673379379f7b10907c0
CSN1 decoding currently contains an attempted read past vector boundaries in
case of a starting bit offset != 0, so that the last amount of bits read should
be < 8. In the case of CSN_LEFT_ALIGNED_VAR_BMP, the mod-8 calculation is
flawed, and in what should be the final step of reading n < 8 bits, 8 bits are
read instead of n (with an extraneous read of n bits following after that).
This leads to -EINVAL being returned by bitvec_get_bit_pos() and bogus
resulting data.
Add testCsnLeftAlignedVarBmpBounds() in RLCMACTest.cpp to show and expect this
bug. The test's expectation shall be corrected along with the bug fix in a
subsequent commit.
Related: OS#1805
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: I4641f5d1d49f66cb1a5cd813befb3a2a266001b0
The test failure was introduced by 9bbe1600cc
"Fix Timing Advance handling": between patch build checking and patch
submission, a new section was added to TbfTest.cpp which also needs adjustment.
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
Earlier there was an incorrect encoding of BSN status in GPRS PUAN message.
This was a bottle neck for GPRS performance testing for UL. Which has been fixed
in this patch.
Related: OS#1806
Change-Id: I98e586aa5cb9200cf03e092556304211d4d459aa
This patch adds a test case which expects a current bug with
GPRS PUAN encoding. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1806
Change-Id: Ied0f1dd3037d8fac6a772f4e097defb72634f955
This patch adds a test case test_tbf_update_ws. Which expects a
current bug with DL window size calculation. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1808
Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
Interface structure between osmo-bts and osmo-pcu is updated with
the parameters to differentiate the type of RACH and further
support 11 bit RACH. The function prototype and definitions are
changed accordingly. Interface version number is increased.
Change-Id: I265c2d92d36d6cbcbeee60cdd8407dafe1da06a4
Earlier there was an incorrect encoding of PUAN when VQ is not equal
VR case for EGPRS UL RLC window. The PCU was encoding the same PUAN
message always irrespective of radio condition. This was a bottle neck
for performance testing. Which has been fixed in this patch.
Related: OS#1793
unit test assertion in the previous commit is fixed in this patch.
Change-Id: Iba7b1995028bd81749ffb080616b2ad5f2540d57
This patch adds a test case which expects a current bug with EGPRS PUAN
encoding when VQ != VR. The test's expectation is corrected along with
the bugfix in a subsequent commit
Adds test_tbf_puan_urbb_len to describe the following bug:
EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN
messages regardless of the urbb_len.
Related: OS#1793
Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
Modify the header files with necessary data structure to handle
Split block for EGPRS DL TBF.
The EGPRS resegmentation feature allows PCU to retransmit
RLC blocks of HeaderType1, HeaderType2 by segmenting
them to 2 HeaderType3 blocks(Example MCS5 will be
retransmitted as 2 MCS2 blocks). Table 10.4.8b.2 of 44.060
explains the possible values of SPB in HeadrType3 for DL
direction. The PCU decides to retransmit the
blocks by resegmenting it based on Table 8.1.1.1 of 44.060.
The retransmission MCS is calculated based on current MCS of
the Block and demanded MCS by PCU. Section 10.3a.3.3 of 44.060
shows the HeadrType3 with SPB field present in it
Change-Id: I57673e53a9da2affa7e8aaa6551ac4b271c3d525
This warning is not valid since the PCU is not failing when EGPRS is
activated. So removing this trace
Change-Id: I62278f998adc691b9a3563ac2a46d756e7bfb66c
The new $with_dsp matrix parameter is defined as "sysmo" or empty/"none". The
lc15 DSP might be added in the future.
Fetch the sysmo layer 1 API only if with_dsp==sysmo.
The new $with_vty parameter is independent of $with_dsp, it is now up to
jenkins to define a matrix filter.
For compat, until jenkins is reconfigured with the new matrix parameters, use
$sysmodsp to init the new parameters to reflect previous behavior. The
$sysmobts matrix parameter made no sense, drop it.
Change-Id: Ia120f918342dc9563814252258b73bfb267e5253
Rename BTS_CONFIG to PCU_CONFIG.
More quotes.
Unify bash if-style.
Define *_PATH variables once globally instead of duping in every line.
Change-Id: If148632c3f340a8a395fa432135e593fecc41e82
Note: this increases the version of BTS <-> PCU protocol and thus
requires corresponding change in BTS.
Change-Id: Ide0e29b668ee38516605c1763fda85e87e867813
Related: OS#1616
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
Modify header files with data structures required
to support split blocks for EGPRS UL TBF
This feature provides provision for MS to retransmit
RLC blocks of HeaderType1, HeaderType2 by segmenting
them to 2 HeaderType3 blocks(Example MCS5 will be
retransmitted as 2 MCS2 blocks). Table 10.4.8b.1 of 44.060
explains the possible values of SPB in HeadrType3 for UL
direction. When the MCS is changed at the PCU, PCU directs the
changed MCS to MS by PUAN or UPLINK ASSIGNMENT message along
with RESEGMENT flag, Then MS may decide to retransmit the
blocks by resegmenting it based on Table 8.1.1.1 of 44.060.
The retransmission MCS is calculated based on current MCS of
the Block and demanded MCS by PCU. Section 10.3a.4.3 of 44.060
shows the HeadrType3 with SPB field present in it.
Change-Id: I83ccd136bb361adcfd511c57c5a9d95ed72c36c2
Check Timing Advance validity and set corresponding bit for Immediate
Assignment message. Previously !polling was errorneously used (polling
bit has nothing to do with TA validity according to 3GPP TS 44.018 Table
10.5.2.16.1) which lead to TA being always valid as polling is always 0
in other parts of the code.
Change-Id: I5d7ecc7f71402b945cae99332be2ebc0b17b9d44
Related: OS#1526
ARFCN is already part of TRX struct so there's no need to supply it
explicitly in a separate parameter. I've tested and those are the same
anyway.
Change-Id: I8e975c52cbc819427880093b1e5371fe1f8ce460
Remove note on PCCCH/PBCCH support because according to 3GPP TS 44.060
version 12.5.0 Release 12 § 1.6 "The network shall never enable PBCCH
and PCCCH".
The rationale behind this from GP-091955:
"Due to that P-channels are not deployed by any operator and are not
expected ever to be, it has decided to remove the requirement on
mandatory support of P-channels for the mobile stations in A/Gb mode."
Change-Id: I2b16413e1b6ce8f2bc2e8183165fb6b3aa14f2d0
Those structs are not used anywhere (which was the case in the commit
which introduced them as well) but give false-positives while grepping
through the code. Better to just drop them.
Change-Id: I0a0bb0c641e4e081a57f72187ff96e9beef16588
EGPRS Type 1, 2, and 3 headers are used by OsmoPCU and OsmoBTS.
Move the header definitions to libosmocore to be shared by both
packages.
Modify the struct variable naming to use *_hi/*_lo instead of
*_a/*_b in order to be consistent with existing naming used in
libosmocore.
Change-Id: I98687ad981d27502aec42729611937ba1caf207c
This routine has been moved from from here to libosmocore and as
part of the C++ -> C the reference got converted to a pointer. We
have a lot of code that calls the method with the reference and
instead of updating the callers, create a short inline wrapper to
call the C routine.
Change-Id: Idd16ce251a42bad4401c2bf3a8fa6af70fb600ff
During MCS upgradation such as MCS6->MCS9, 2 blocks which
were sent separately as MCS6, will be clubbed into one MCS9
block during retransmission. Same holds good for
MCS5->MCS7 transistion. During MCS reduction such as
MCS9->MCS6,2 blocks which were sent together will be
sent separately during the retransmission case.
Same is verified through the generated log file. Currently
MCS8->MCS6 transition is not supported. The retransmission
MCS is being calculated from Table 8.1.1.2 of TS 44.060.
The same test cases are also integration tested on Nuran
1.0 platform.
Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
Modify the existing data structure to support ARQ-II for Retx in EGPRS DL.
This will also hadle compilation issue related to renaming the variable.
Change-Id: I734b1024bb32f2daa43af4adf59f4a17f2294afe
In commit 6d8884de49 in 2014, we
made the '-e' command line option deprecated. Stop using it from the
systemd srevice file.
Change-Id: I322cadbee8980b78fff2984765c4b0216c50412e
Related: SYS#2749
Update test suite with test cases for Header type 1 in EGPRS UL
Change-Id: I21811bb126dbe151b0708a964d3143bc2fd52389
Reviewed-on: https://gerrit.osmocom.org/272
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Function is added to parse the EGPRS header type 1 in uplink tbf path.
along with configuration parameter updation to reflect max mcs in UL
Change-Id: I13c250e2e07377982ac3f29745f3cffd4088552a
Reviewed-on: https://gerrit.osmocom.org/270
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Jenkins Builder
This patch will add support for MCS5,6 in EGPRS UL along with incorrect
assert correction to let MCS 6 work.
Change-Id: Iac2422c8acbdcefe20aafbba6a4eb87c9893e3ba
Reviewed-on: https://gerrit.osmocom.org/269
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Since we are supporting MCS 5-9 in this patch series for EGPRS UL,
This condition is not relevant. So removing it.
Change-Id: I567acc012d8ad49681715f0104ba7e91625e1e7a
Reviewed-on: https://gerrit.osmocom.org/268
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Updates the test suite to add test cases for Header type 2 parsing
in EGPRS UL.
Change-Id: I1dd46010065a6d6da21e8e45af71e6d5f649b0b0
Reviewed-on: https://gerrit.osmocom.org/271
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
All checks of (this == null) will be eliminated by GCC >= 6.1
(https://gcc.gnu.org/gcc-6/changes.html, Value range propagation now
assumes that the this pointer of C++ member functions is non-null.
Change-Id: Ifddaef70bb0a4402050c817b1000d515c3a7118b
Reviewed-on: https://gerrit.osmocom.org/136
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Holger Freyther <holger@freyther.de>
It makes no sense to call functions on null pointer object. Use
the name of the old tbf.
Change-Id: I93b8c07a0b2de40a11e94fd6c212897cbe3b50ef
Reviewed-on: https://gerrit.osmocom.org/212
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Aravind Sirsikar
Neels Hofmeyr
Harald Welte