Let's avoid flooding the BTS and taking CCCH resources for no good
reason. If user configures everything correctly, the SGSN should not
attempt a retry after similar timer >= T3113.
Related: OS#5297
Change-Id: I2a77714648d16ccff2a340ce775e83dcc5ffe707
This counter is related to succPDTCHSeizures,
(3GPP TS 52.402 B.2.1.51 Successful PDTCH seizures).
The relevant event when the first RLC block on the PDCH from the MS is
received is the fact that contention resolution is considered as done in
the network side. Hence, name the counter that way to ease
interpretation.
Related: SYS#4878
Change-Id: I3d67e3e68907921b43f2ca4398ad9578c0b2618c
These new counters allow the user to find out which kind of access are
MS requesting.
Related: SYS#4878
Change-Id: Id87c3a53d3acee92499987c843130e358f54742c
This way it fits better the structure where the general one counts all
rachs, and 11bit only the 11 bits. More per-type splitting will be done
in follow-up commits where new types are added.
Change-Id: Ibdfb10dcc65d71e98e2fe8b05001cafea786f071
Add stats needed for performance measurements in
3GPP TS 52.402 § B.2.1.54-55.
Split m_num_tbfs to count GPRS and EGPRS TBFs separately. Move the code
that updates m_num_tbfs and sets the PDCH_OCCUPIED stats to a separate
function, as it's mostly the same in the TBF attach and detach.
Related: SYS#4878
Change-Id: I0c0a1121b4ae5f031782e7e63a0c28eb0b6c8b42
Count available PDCHs (3GPP TS 52.402 § B.2.1.38) as well as occupied
PDCHs (§ B.2.1.42-44).
Related: SYS#4878
Change-Id: I74760a68ee055510a79e80854ec7bf1521669119
Implement T3113 for paging over PCH with default value of 7s (same as
T3113 in OsmoBSC). Increase the new counter on timeout.
Related: SYS#4878
Change-Id: I97475c3dbe2cf00b9cbfec39e93a3c65cb7f749f
OsmoPCU will need this SI2 in order to gain knowledge of the BCCH
Frequency List being broadcasted, in order to build a per-MS specific
Neighbour List using NC_FREQUENCY_LIST bits in Packet Measurement Order.
Related: SYS#5303
Change-Id: I4a9c4f70beac6805322a19835a0d30f7247780b4
Before this patch, when a PAGING-GS was received in PCU from SGSN, it
would always forward the paging request to all PDCHs in all TRXs of all
BTS (well, it did some heuristics to avoid sending it in some PDCHs
where onyl repeated TBFs would be listening).
The previous behavior, didn't make much sense in the case where the PCU
is asked to page an MS which it knows (ie in which PDCHs is listening
to). Hence, in that case it makes sense to simply send the paging
request on 1 PDCH where the MS is listening, instead of sending it in a
big set of different PDCHs.
This commit also splits the old get_paging_mi() helper which was
erroneously created to parseboth CS/PS-PAGING requesst, since they
actually use a different set of target subscriber information (for
instance, CS-PAGING provides optionally a TLLI, and one provides P-TMSI
while the other provides TMSI).
In this patch, the handling of CS paging request is split into 2 parts:
1- A new helper "struct paging_req_cs" is introduced, where incoming
CS-PAGING requests (from both SGSN over BSSGP and BTS/BSC over PCUIF)
are parsed and information stored. Then, from available information, it
tries to find a target MS if avaialable
2- bts_add_paging() is called from both BSSGP and PCUIF paths with the
helper struct and the target MS (NULL if not found). If MS exists,
paging is forwarding only on 1 PDCH that MS is attached to. If no MS
exists, then the old heursitics are used to forward the request to all
MS.
Change-Id: Iea46d5321a29d800813b1aa2bf4ce175ce45e2cf
Value 'false' is always passed by all callers of the function, so
there's no need to pass it. Furthermore, since it's false, there's no
need to access poll_fn since RRBP will always be invalid.
Change-Id: Ia48ce2a021865e76e813dedb22aca9c2522c5693
There's no need for setting the FN in RA.ind since we anyway already
receive a DATA.ind beforehand.
Furthermore, the applied delay of 5 in the call is not really used at
all.
Change-Id: I437f4f95d054aea96bec3b9343e495451020ff3c
TbfTest is updated to submit empty blocks to have somehow meaningful
output (at least as meaningful test results as before, not much). That's
because we must update bts->curr_fn to have polls expire.
Related: OS#5020
Change-Id: I683ca738ce5a133c49c36a1d94439a942d64a831
Right now we handle different types of UL allocations in different
classes like PollAllocator and SBAllocator, and they usually don't take
into account the other one in most cases. Furthermore, those objects are
usually per-BTS object, instead of per PDCH object.
This is a first step towards having a unified per-PDCH controller which
takes care of controlling what is scheduled and hence expected on the
uplink. Each PDCH has a UL Controller which keeps track of all reserved
uplink frame, be it SB, RRBP poll or USF assigned, all under the same
API.
As a first step, only the SBA part is fully implemented and used (being
it the easiest part to replace); TBF poll+usf will come in follow-up
patches later on. As a result, the SBAllocator per-BTS class dissappears
but some of its code is refactored/reused to provide more features to the
gprs_rlcmac_sba object, which is also further integrated into the new UL
Controller.
Related: OS#5020
Change-Id: I84b24beea4a1aa2c1528f41435f77bd16df2b947
This is specially useful to detect for instance if a cell is handling
too many users, ending up in TFI or USF exhaustions. This information
can be later in the future used to tune TBF allocation algorithm behavior
(either manually/statially through config file, or
automatically/dynamically in code based on some thresholds).
Related: OS#5042
Change-Id: I5402e937ff8d800684655e500ef8e5c867141dc3
The old VTY command is marked as deprecated and still overrides the use
in case it's used.
Related: SYS#5358
Depends: libosmocore.git Change-Id I74fb0a3afc1ac4aadbfc609b882d929401f790eb
Depends: osmo-bsc.git Change-Id I8b97ea11bad5fe05f2f634945b5703ee9abde81d
Change-Id: I46f2a955b157a409055fca7fb917dc4f75482426
Answer an incoming RAN INFORMATION REQUEST RIM PDU with RAN INFORMATION
PDU that contains system information type 1, 3 and 13
Depends: osmo-bts I5138ab183793e7eee4dc494318d984e9f1f56932
Change-Id: Id72118120c14984d2fb1b918b41fac4868150d41
Related: SYS#5103
A new nacc_fsm is introduced per MS object, with its partner priv
structure struct nacc_fsm_ctx, which exists and is available in the MS
object only during the duration of the NACC procedure.
The NACC context is created on an MS whenever a Pkt Cell Change
Notification is received on Uplink RLCMAC, which asks for neighbor
information of a given ARFCN+BSIC.
First, the target ARFCN+BSIC needs to be translated into a CGI-PS
(RAC+CI) address. That's done by asking the BSC through the Neighbour
Resolution Service available in osmo-bsc using the CTRL interface.
Once the CGI-PS of the target cell is known, PCU starts a RIM RAN-INFO
request against the SGSN (which will route the request as needed), and
wait for a response containing the SI bits from the target cell.
After the SI are received, the scheduler is instructed to eventually
poll a TBF for the MS originating the CCN, so that we can send the SI
encapsulated into multiple Packet Neighbor Cell Data messages on the
downlink.
One all the SI bits are sent, the scheduler is instructed to send a
Packet Cell Change Continue message.
Once the message above has been sent, the FSM autodestroys itself.
Caches are also introduced in this patch which allows for re-using
recently known translations ARFCN+BSIC -> CGI-PS and CGI-PS -> SI_INFO
respectively.
Change-Id: Id35f40d05f3e081f32fddbf1fa34cb338db452ca
This patch doesn't really tests whether osmo-pcu can work on a multi-bts
environment, but it prepares the data structures to be able to do so at
any later point in time.
Change-Id: I6b10913f46c19d438c4e250a436a7446694b725a
There's no BTS single global object anymore, get rid of those APIs. Move
users to use "pcu->bts", which will evolve to a linked list in the
future.
Change-Id: I9cf762b0d3cb9e2cc3582727e07fa82c8e183ec5
Previous work on BTS class started to get stuff out of the C++ struct
into a C struct (BTS -> struct gprs_glcmac_bts) so that some parts of
it were accessible from C code. Doing so, however, ended up being messy
too, since all code needs to be switching from one object to another,
which actually refer to the same logical component.
Let's instead rejoin the structures and make sure the struct is
accessible and usable from both C and C++ code by rewriting all methods
to be C compatible and converting 3 allocated suboject as pointers.
This way BTS can internally still use those C++ objects while providing
a clean APi to both C and C++ code.
Change-Id: I7d12c896c5ded659ca9d3bff4cf3a3fc857db9dd
Both values (optionally) set (forced) by VTY and the values received
from PCUIF were stored in the same variable, meaning that for instance
the PCUIF values wouldn't really be used if someone applied eg "no cs"
during runtime.
This commit does something similar to what was already done for the
max_(m)cs fields. We store PCUIF values in one place and VTY ones in
another place, and then trigger a bts object internal process to find
out exactly which initial CS should it be using.
Change-Id: I80a6ba401f9c0c85bdf6e0cc99a9d2008d31e1b0
Currently the BTS object (and gprs_rlcmac_bts struct) are used to hold
both PCU global fields and BTS specific fields, all mangled together.
The BTS is even accessed in lots of places by means of a singleton.
This patch introduces a new struct gprs_pcu object aimed at holding all
global state, and several fields are already moved from BTS to it. The
new object can be accessed as global variable "the_pcu", reusing and
including an already exisitng "the_pcu" global variable only used for
bssgp related purposes so far.
This is only a first step towards having a complete split global pcu and
BTS, some fields are still kept in BTS and will be moved over follow-up
smaller patches in the future (since this patch is already quite big).
So far, the code still only supports one BTS, which can be accessed
using the_pcu->bts. In the future that field will be replaced with a
list, and the BTS singletons will be removed.
The cur_fn output changes in TbfTest are actually a side effect fix,
since the singleton main_bts() now points internally to the_pcu->bts,
hence the same we allocate and assign in the test. Beforehand, "the_bts"
was allocated in the stack while main_bts() still returned an unrelated
singleton BTS object instance.
Related: OS#4935
Change-Id: I88e3c6471b80245ce3798223f1a61190f14aa840
As we integrate osmo-pcu more and more with libosmocore features, it
becomes really hard to use them since libosmocore relies heavily on C
specific compilation features, which are not available in old C++
compilers (such as designated initializers for complex types in FSMs).
GprsMs is right now a quite simple object since initial design of
osmo-pcu made it optional and most of the logic was placed and stored
duplicated in TBF objects. However, that's changing as we introduce more
features, with the GprsMS class getting more weight. Hence, let's move
it now to be a C struct in order to be able to easily use libosmocore
features there, such as FSMs.
Some helper classes which GprsMs uses are also mostly move to C since
they are mostly structs with methods, so there's no point in having
duplicated APIs for C++ and C for such simple cases.
For some more complex classes, like (ul_,dl_)tbf, C API bindings are
added where needed so that GprsMs can use functionalitites from that
class. Most of those APIs can be kept afterwards and drop the C++ ones
since they provide no benefit in general.
Change-Id: I0b50e3367aaad9dcada76da97b438e452c8b230c
NS2 introduce a ns dialect to differentiate
between the 4 possible dialects.
Related: OS#4472, OS#4890
Depends: libosmocore.git Ia118bb6f994845d84db09de7a94856f5ca573404
Change-Id: I16dc82c38eb75c2b9d1197640a955fec7df84efc
In previous status, if USF for GPRS-only MS was selected, then EGPRS
TBFs were skipped and either a GPRS TBF was selected or a Dummy Block
was sent. That means the behavior was unfair towards EGPRS TBFs, because
sometimes they were skipped in favor of GPRS ones.
This patch imporves the situation in the above mentioned USF scenario, by
first, under specific conditions, allowing selection of an EGPRS TBF and
then forcing it to transmit in EGPRS-GMSK (MCS1-4) so that the
USF-targeted MS can still decode the USF, while at the same time
providing more fairness by allowing the EGPRS TBF to transmit data.
The specific conditions mentioned above are, mainly, related to the fact
that once a DL data block has been sent, and hence a BSN was assigned to
it, it cannot be retransmitted later using another MCS, since lower
MCS1-4 wouldn't be able to contain higher MCS RLC payload.
The set of conditions could be expanded in the future by also selecting
the EGPRS TBF if retransmition is required and the block to be
retransmitted was originally transmitted as MCS1-4.
Related: OS#4544
Change-Id: I9af23e175435fe9ae7b0e4119ad52fcd4707b9ca
The assumption that TLLI 0x00000000 is invalid and can be used
as the initializer is wrong. Similar to TMSI, 0x00000000 is a
perfectly valid value, while 0xffffffff is reserved - use it.
According to 3GPP TS 23.003, section 2.4, a TMSI/P-TMSI with
all 32 bits equal to 1 is special and shall not be allocated by
the network. The reason is that it must be stored on the SIM,
where 'ff'O represents the erased state. According to section
2.6 of the same document, a local/foreign TLLI is derived from
P-TMSI, so the same rule applies to TLLI.
I manually checked and corrected all occurances of 'tlli' in the
code. The test expectations have been adjusted with this command:
$ find tests/ -name "*.err" | xargs sed -i "s/0x00000000/0xffffffff/g"
so there should be no behavior change. The only exception is
the 'TypesTest', where TLLI 0xffffffff is being encoded and
expected in the hexdump, so I regenerated the test output.
Change-Id: Ie89fab75ecc1d8b5e238d3ff214ea7ac830b68b5
Related: OS#4844
Pau Espin
Oliver Smith
Pau Espin Pedrol
Philipp Maier
Vadim Yanitskiy