This patch avoids enabling EGPRS on MS objects if BTS/VTY assigned no
MCS supported/available for use.
As a result, if NO MCS is enabled/supported EGPRS won't be used despite
the MS announcing through EGPRS MS class that it supports EGPRS.
Change-Id: Ib19e9e006d851c2147de15f4aec36ab65250bdd3
Also add a few more asserts to make sure a valid CS/MCS is passed in
some placed where we expect (M)CS to be set.
Change-Id: I0a973e10cd9477f72d8bd47a06048414b33ae96a
Properly clip initial_(m)cs values to be lower-equal than maximum
configured.
Regarding initial_mcs, use values provided by BTS, which were not used
before.
Change-Id: Ifc6bc7c2734d1ae404adc2497afec5366e4f9e50
BTS simply notifies the PCU about the supported MCS, and PCU is
responsible for providing correct data formatting supported for the BTS
and the target MS.
Related: OS#4544
Change-Id: Ifcf23771bd23afc64ca6fea38948f98f2d134ecb
For instance if PCU received DL data to be sent to an MS from an SGSN,
and the MS is not currently cached in the PCU (because there's no TBF
active for it), it will page it and transmit the DL data to it.
The SGSN is capable of sending (EGPRS) MS Class information in that same
DL data message, so it's the one responsible for providing that
information if not available at the PCU.
In the PCU if we don't have information about that MS and SGSN didn't
provide us information about it, we cannot assume the MS is going to be
EGPRS capable and even less expecting a specific EGPRS MS class.
So let's drop this code.
Related: OS#4544
Change-Id: Icce66cadb51af25ae0c3b3719940eccb548fe33b
EGPRS "enabled" or "not enabled" is a bit of confusing idea, since there
are different levels of EGPRS support. For instance we may have been
instructed by config to not transmit using MCS5-9 (8PSK), or not use
MCS1-9 at all (GMSK+8PSK). However, we cannot control what is sent to us
or what we receive on lower layers, so if the BTS PHY/receiver was able
to decode+receive, let's try to process it anyway...
Related: OS#4544
Change-Id: Ie70ec8e4a2d688762d7d320d6ad58d5a0cc52ea1
This VTY command was added due to EGPRS being introduced later as an
experimental feature. It's no longer needed and causes more problems
than goodness (since people sometimes forgets to enable it).
Let's rather simply enable EGPRS support based on what BTS/BSC requests
over PCUIF.
Related: OS#4544
Change-Id: Ic80970a136361584da9c912252a07e7c3c9d85d0
Some tests were wrong (TypesTest) and required modification, since they
were setting a EGPRS MS but then expecting a GPRS assignment.
Change-Id: I9d3ee21c765054a36bd22352e48bde5ffca9225a
Take into account the MCS values supported by the BTS. In osmo-bts,
in general all MCS are enabled if "mode egprs" is selected in BSC,
and none otherwise.
Change-Id: Ie8f0215ba17da1e545e98bec9325c02f1e8efaea
This way everytime any program or test initiates a BTS object, the
bts_data structure has the same values.
Change-Id: Iffd6eecb1f08bda0091f45e2ef7c9c63b42e10b3
If SGSN provides us with MS class information upon DL data, let's use it
and set it in an already existing MS object if not yet known.
Also remove all unneeded code passing ms_class to append_data() which
would simply try to (again) set the ms_class.
Change-Id: I4979c9344bffd3ba7657bbab94981d233eab801f
Before this patch, it would always allocate all TBFs on the first TRX
until all TFIs were filled, then second, and so on. But it would
actually fail around 8th MS requesting an UL TBF because despite a TFI
was successfuly assigned, because all USFs were already exhausted for
that PDCH.
Related: OS#1775
Change-Id: Iccfc8acfbfdc258ed16cc5af01f12b376fe73b72
Avoid passing tons of params to internal helper function
tbf_nel_dl_assignment() in order to either fetch again the ms object or
create a new one. Let's instead create the ms function earlier if needed
and fill it with all the discovered information prior to calling the
helper function. This provides cleaner code and also better log output.
This way we also avoid trying to fill the MS twice and unneeded
getter+setter for TA.
tbf::imsi(): There' always an ms, so simply forward call to
ms()->imsi().
We can also get rid of assign_imsi, since the modified code is the only
place where it's used and there's already some code in place there to
update the MS. We instead merge it with set_imsi and keep the
duplication code to catch possible bugs from callers.
Move merge_and_clear_ms from tbf class to GprsMS, where it really
belongs.
Change-Id: Id18098bac3cff26fc4a8d2f419e21641a1f4c83b
The BTS field will be used in code paths after next patch changes,
otherwise the test fails accessing the NULL pointer.
Change-Id: I5098292bdafa9f4f70fef1a053b80a33deca722c
This is another step forward towards a more clear data model where a TBF
always has a MS object (which may be lacking some information, and at a
later point when more information is found, it may actually be a
duplicated MS object and hence one duplicate removed and the TBF moved
to the object being kept).
This helps for instance in removing duplicated information stored in
the TBF which is really per MS, like ms_class, ta, etc. Since there's
always a MS object there's no need to keep a duplicate in both classes
in case there's no MS object.
It can already be seen looking at unit test logging that this kind of
data model already provides better information.
Some unit test parts were needed to adapt to the new model too.
Change-Id: I3cdf4d53e222777d5a2bf4c5aad3a7414105f14c
There's no real need for having different copies of this method in each
children. Furthermore, having the method implemented in the base class
made me shoot my foot while trying to move this to the tbf constructor
(see next commit), so let's simplify this and avoid other people
following into the same issue.
enable_egprs() in tbf.h is moved to be public since it needed (as it was
for the duplicated children mehtods with same name), but anyway it will
be moved to private in next commit.
Change-Id: Id7de060318201a42e51f277f898463f4b9a84eba
Return an interface to the window base class so that the tbf base class
can access the common window methods, such as set_ws(). It will be used
in next commit to get rid of duplicated function enable_egprs in both
dl_tbf and ul_tbf subclasses.
The user of the function can then decide to access more specific
functionaltiites of the window class by static casting it to the
specific direction (which is known by the caller since it operates on a
ul_tbf or a dl_tbf).
Change-Id: Ia2e1decf91be1184668e28297c2126affb9c7ae4
In those cases since a string pointer was passed, it always printed
"single" instead of whatever really was being used, since the string
pointer was not NULL.
Change-Id: Idab7d18e8f519e10fc3df4007634661c46f9256d
In general we want to see explicitly the kind of requested allocation at
the start. The MS class is not needed since it's printed in the previous
log line in any case.
Change-Id: I9eb0a592c15be96da9d140ff373c1afead76b18c
Add support of the second NSVC in the info indication.
Add support to update a previous NS configuration.
Allow to update of a NS-VC while the NSE is still available over the
second.
Depends-on: I917f25ebd1239eae5855d973ced15b93731e33a0 (libosmocore)
Depends-on: I3a0cd305fd73b3cb9ec70246ec15ac70b83e57f2 (libosmocore)
Depends-on: I5a2bb95d05d06d909347e2fb084a446ead888cb3 (libosmocore)
Depends-on: I54f110acc3acccb362f6e554324d08cc42b7c328 (libosmocore)
Depends-on: Ia00753a64b7622a0864341f51ea49b6963543755 (libosmocore)
Depends-on: Ic8f6f8aca10da23a18fab8870be7806065a34b47 (libosmocore)
Depends-on: I5f67e6a9bf4cb322bd169061fee0a528012ed54d (libosmocore)
Change-Id: I589ebaa2a2b7de55b7e4e975d8fd6412dd5f214b
It's expected to receive subsequent INFO.ind messages at run-time,
e.g. when a dynamic TCH/F_TCH/H_PDCH timeslot is switched from
PDCH to TCH/F or TCH/H, osmo-bts would send us INFO.ind with the
updated PDCH slot-mask indicating that this timeslot is disabled.
In gprs_nsvc_create_and_connect(), do not bind() on the received
NSVC address unconditionally - we may already be bound to it.
Instead, return early and keep everything unchanged.
I don't know how the PCU is supposed to handle NSVC address change,
at least the new NS2 library does not handle this internally, nor
it provides any API for that. Let's leave it for later.
Change-Id: I159138e41e147cd30212da548b0ccd3f81d61b4e
Related: I4c3bc883d795e5d1ee5ab175ac03684924692a7c
Fixes: Ib389925cf5c9f18951af6242c31ea70476218e9a
Related: SYS#5108
The code in gprs_nsvc_create_and_connect() stores NSEI there for
no reason, despite it's already stored in struct gprs_ns2_nse.
Change-Id: Ib30152a12384cf0448104a1ee1cfb949f4a27553
The commandline option --vty-ref-xml is needed to enable automatic
generation of the VTY reference manual.
Change-Id: Ie1829a06b83f69f4cd8256adbf9437388ca3d7e0
Related: SYS#4937, OS#1601