Osmocom Mobile Switching Centre
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
osmo-msc/doc/manuals/vty/msc_vty_reference.xml

3267 lines
159 KiB

<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
<node id='_common_cmds_'>
<name>Common Commands</name>
<description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
<command id='help'>
<params>
<param name='help' doc='Description of the interactive help system' />
</params>
</command>
<command id='list'>
<params>
<param name='list' doc='Print command list' />
</params>
</command>
<command id='write terminal'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='terminal' doc='Write to terminal' />
</params>
</command>
<command id='write file [PATH]'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='file' doc='Write to configuration file' />
<param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
</params>
</command>
<command id='write memory'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='memory' doc='Write configuration to the file (same as write file)' />
</params>
</command>
<command id='write'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id='show running-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='running-config' doc='running configuration' />
</params>
</command>
<command id='exit'>
<params>
<param name='exit' doc='Exit current mode and down to previous mode' />
</params>
</command>
<command id='end'>
<params>
<param name='end' doc='End current mode and change to enable mode.' />
</params>
</command>
</node>
<node id='view'>
<name>view</name>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='enable'>
<params>
<param name='enable' doc='Turn on privileged mode command' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; users'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='users' doc='User Table' />
</params>
</command>
<command id='show cs7 (sua|m3ua|ipa) [&lt;0-65534&gt;]'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='sua' doc='SCCP User Adaptation' />
<param name='m3ua' doc='MTP3 User Adaptation' />
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
<param name='[&lt;0-65534&gt;]' doc='Port Number' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; asp'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='asp' doc='Application Server Process (ASP)' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; as (active|all|m3ua|sua)'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='as' doc='Application Server (AS)' />
<param name='active' doc='Display all active ASs' />
<param name='all' doc='Display all ASs (default)' />
<param name='m3ua' doc='Display all m3ua ASs' />
<param name='sua' doc='Display all SUA ASs' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp addressbook'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='addressbook' doc='List all SCCP addressbook entries' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp users'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='users' doc='Show List of SCCP Users registered' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp ssn &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='ssn' doc='Find an SCCP User registered for the given SSN' />
<param name='&lt;0-65535&gt;' doc='Subsystem Number (SSN)' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp connections'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='connections' doc='Show List of active SCCP connections' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp timers'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signaling Connection Control Part' />
<param name='timers' doc='Show List of SCCP timers' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|ss|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
<param name='cc' doc='Layer3 Call Control (CC)' />
<param name='mm' doc='Layer3 Mobility Management (MM)' />
<param name='rr' doc='Layer3 Radio Resource (RR)' />
<param name='mncc' doc='MNCC API for Call Control application' />
<param name='pag' doc='Paging Subsystem' />
<param name='msc' doc='Mobile Switching Center' />
<param name='mgcp' doc='Media Gateway Control Protocol' />
<param name='ho' doc='Hand-Over' />
<param name='db' doc='Database Layer' />
<param name='ref' doc='Reference Counting' />
<param name='ctrl' doc='Control interface' />
<param name='smpp' doc='SMPP interface for external SMS apps' />
<param name='ranap' doc='Radio Access Network Application Part Protocol' />
<param name='vlr' doc='Visitor Location Register' />
<param name='iucs' doc='Iu-CS Protocol' />
<param name='bssap' doc='BSSAP Protocol (A Interface)' />
<param name='sgs' doc='SGs Interface (SGsAP)' />
<param name='ss' doc='Supplementary Services' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|ss|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
<param name='cc' doc='Layer3 Call Control (CC)' />
<param name='mm' doc='Layer3 Mobility Management (MM)' />
<param name='rr' doc='Layer3 Radio Resource (RR)' />
<param name='mncc' doc='MNCC API for Call Control application' />
<param name='pag' doc='Paging Subsystem' />
<param name='msc' doc='Mobile Switching Center' />
<param name='mgcp' doc='Media Gateway Control Protocol' />
<param name='ho' doc='Hand-Over' />
<param name='db' doc='Database Layer' />
<param name='ref' doc='Reference Counting' />
<param name='ctrl' doc='Control interface' />
<param name='smpp' doc='SMPP interface for external SMS apps' />
<param name='ranap' doc='Radio Access Network Application Part Protocol' />
<param name='vlr' doc='Visitor Location Register' />
<param name='iucs' doc='Iu-CS Protocol' />
<param name='bssap' doc='BSSAP Protocol (A Interface)' />
<param name='sgs' doc='SGs Interface (SGsAP)' />
<param name='ss' doc='Supplementary Services' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
<command id='show neighbor'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
</params>
</command>
<command id='show neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='ran-pc' doc='SCCP point code of RAN peer' />
<param name='msc-ipa-name' doc='GSUP IPA name of target MSC' />
<param name='RAN_PC_OR_MSC_IPA_NAME' doc='Point code or MSC IPA name value' />
</params>
</command>
<command id='show neighbor (a|iu)'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
</params>
</command>
<command id='show neighbor (a|iu) lac &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='lac' doc='Handover target cell by LAC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
</params>
</command>
<command id='show neighbor (a|iu) lac-ci &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='lac-ci' doc='Handover target cell by LAC and CI' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor (a|iu) cgi &lt;0-999&gt; &lt;0-999&gt; &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='cgi' doc='Handover target cell by Cell-Global Identifier (MCC, MNC, LAC, CI)' />
<param name='&lt;0-999&gt;' doc='MCC' />
<param name='&lt;0-999&gt;' doc='MNC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor lac &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='lac' doc='Handover target cell by LAC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
</params>
</command>
<command id='show neighbor lac-ci &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='lac-ci' doc='Handover target cell by LAC and CI' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor cgi &lt;0-999&gt; &lt;0-999&gt; &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='cgi' doc='Handover target cell by Cell-Global Identifier (MCC, MNC, LAC, CI)' />
<param name='&lt;0-999&gt;' doc='MCC' />
<param name='&lt;0-999&gt;' doc='MNC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN]'>
<params>
<param name='show' doc='Show running system information' />
<param name='timer' doc='Show timers' />
<param name='[mgw]' doc='MGW (Media Gateway) interface' />
<param name='[mncc]' doc='MNCC (Mobile Network Call Control) interface' />
<param name='[sccp]' doc='SCCP (Signalling Connection Control Part)' />
<param name='[geran]' doc='GERAN (GSM EDGE Radio Access Network)' />
<param name='[utran]' doc='UTRAN (UMTS Terrestrial Radio Access Network)' />
<param name='[sgs]' doc='SGs interface towards MME' />
<param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format &apos;1234&apos; or &apos;T1234&apos; or &apos;t1234&apos;; Osmocom-specific timer number of the format: &apos;X1234&apos; or &apos;x1234&apos;.' />
</params>
</command>
<command id='show fsm NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='NAME' doc='Display information about a single named finite state machine' />
</params>
</command>
<command id='show fsm all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='all' doc='Display a list of all registered finite state machines' />
</params>
</command>
<command id='show fsm-instances NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id='show fsm-instances all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
<command id='show sgs-connections'>
<params>
<param name='show' doc='Show running system information' />
<param name='sgs-connections' doc='Show SGs interface connections / MMEs' />
</params>
</command>
<command id='show subscriber (msisdn|extension|imsi|tmsi|id) ID [(conn|trans|conn+trans)]'>
<params>
<param name='show' doc='Show running system information' />
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='[conn]' doc='Show child connections' />
<param name='[trans]' doc='Show child transactions' />
<param name='[conn+trans]' doc='Show child connections and transactions' />
</params>
</command>
<command id='show subscriber cache [(conn|trans|conn+trans)]'>
<params>
<param name='show' doc='Show running system information' />
<param name='subscriber' doc='Show information about subscribers' />
<param name='cache' doc='Display contents of subscriber cache' />
<param name='[conn]' doc='Show child connections' />
<param name='[trans]' doc='Show child transactions' />
<param name='[conn+trans]' doc='Show child connections and transactions' />
</params>
</command>
<command id='show bsc'>
<params>
<param name='show' doc='Show running system information' />
<param name='bsc' doc='BSC' />
</params>
</command>
<command id='show connection [trans]'>
<params>
<param name='show' doc='Show running system information' />
<param name='connection' doc='Subscriber Connections' />
<param name='[trans]' doc='Show child transactions of each connection' />
</params>
</command>
<command id='show transaction'>
<params>
<param name='show' doc='Show running system information' />
<param name='transaction' doc='Transactions' />
</params>
</command>
<command id='sms send pending'>
<params>
<param name='sms' doc='SMS related commands' />
<param name='send' doc='SMS Sending related commands' />
<param name='pending' doc='Send all pending SMS' />
</params>
</command>
<command id='sms delete expired'>
<params>
<param name='sms' doc='SMS related commands' />
<param name='delete' doc='SMS Database related commands' />
<param name='expired' doc='Delete all expired SMS' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='sms' doc='SMS Operations' />
<param name='sender' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='SENDER_ID' doc='Identifier for the subscriber' />
<param name='send' doc='Send SMS' />
<param name='.LINE' doc='Actual SMS Text' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-sms' doc='Silent SMS Operations' />
<param name='sender' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='SENDER_ID' doc='Identifier for the subscriber' />
<param name='send' doc='Send SMS' />
<param name='.LINE' doc='Actual SMS Text' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/h|tch/any|sdcch) (signalling|speech-hr|speech-fr|speech-efr|speech-amr) [IP] [&lt;0-65535&gt;]'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-call' doc='Silent call operation' />
<param name='start' doc='Start silent call' />
<param name='any' doc='Any channel' />
<param name='tch/f' doc='TCH/F channel' />
<param name='tch/h' doc='TCH/H channel' />
<param name='tch/any' doc='Any TCH channel' />
<param name='sdcch' doc='SDCCH channel' />
<param name='signalling' doc='Signalling only' />
<param name='speech-hr' doc='Speech with HR codec' />
<param name='speech-fr' doc='Speech with FR codec' />
<param name='speech-efr' doc='Speech with EFR codec' />
<param name='speech-amr' doc='Speech with AMR codec' />
<param name='[IP]' doc='Target IP for RTP traffic (default 127.0.0.1)' />
<param name='[&lt;0-65535&gt;]' doc='Target port for RTP traffic (default: 4000)' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-call' doc='Silent call operation' />
<param name='stop' doc='Stop silent call' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
<param name='0' doc='Alerting Level 0' />
<param name='1' doc='Alerting Level 1' />
<param name='2' doc='Alerting Level 2' />
<param name='.TEXT' doc='Text of USSD message to send' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
<param name='close-loop' doc='Close a TCH Loop inside the MS' />
<param name='a' doc='Loop Type A' />
<param name='b' doc='Loop Type B' />
<param name='c' doc='Loop Type C' />
<param name='d' doc='Loop Type D' />
<param name='e' doc='Loop Type E' />
<param name='f' doc='Loop Type F' />
<param name='i' doc='Loop Type I' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
<param name='open-loop' doc='Open a TCH Loop inside the MS' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID paging'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='paging' doc='Issue an empty Paging for the subscriber (for debugging)' />
</params>
</command>
<command id='show statistics'>
<params>
<param name='show' doc='Show running system information' />
<param name='statistics' doc='Display network statistics' />
</params>
</command>
<command id='show sms-queue'>
<params>
<param name='show' doc='Show running system information' />
<param name='sms-queue' doc='Display SMSqueue statistics' />
</params>
</command>
<command id='logging filter imsi IMSI'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='imsi' doc='Filter log messages by IMSI' />
<param name='IMSI' doc='IMSI to be used as filter' />
</params>
</command>
<command id='show smpp esme'>
<params>
<param name='show' doc='Show running system information' />
<param name='smpp' doc='SMPP Interface' />
<param name='esme' doc='SMPP External SMS Entity' />
</params>
</command>
</node>
<node id='enable'>
<name>enable</name>
<command id='disable'>
<params>
<param name='disable' doc='Turn off privileged mode command' />
</params>
</command>
<command id='configure terminal'>
<params>
<param name='configure' doc='Configuration from vty interface' />
<param name='terminal' doc='Configuration terminal' />
</params>
</command>
<command id='copy running-config startup-config'>
<params>
<param name='copy' doc='Copy configuration' />
<param name='running-config' doc='Copy running config to... ' />
<param name='startup-config' doc='Copy running config to startup config (same as write file)' />
</params>
</command>
<command id='show startup-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='startup-config' doc='Contentes of startup configuration' />
</params>
</command>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='terminal monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='terminal no monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; users'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='users' doc='User Table' />
</params>
</command>
<command id='show cs7 (sua|m3ua|ipa) [&lt;0-65534&gt;]'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='sua' doc='SCCP User Adaptation' />
<param name='m3ua' doc='MTP3 User Adaptation' />
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
<param name='[&lt;0-65534&gt;]' doc='Port Number' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; asp'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='asp' doc='Application Server Process (ASP)' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; as (active|all|m3ua|sua)'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='as' doc='Application Server (AS)' />
<param name='active' doc='Display all active ASs' />
<param name='all' doc='Display all ASs (default)' />
<param name='m3ua' doc='Display all m3ua ASs' />
<param name='sua' doc='Display all SUA ASs' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp addressbook'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='addressbook' doc='List all SCCP addressbook entries' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp users'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='users' doc='Show List of SCCP Users registered' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp ssn &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='ssn' doc='Find an SCCP User registered for the given SSN' />
<param name='&lt;0-65535&gt;' doc='Subsystem Number (SSN)' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp connections'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='connections' doc='Show List of active SCCP connections' />
</params>
</command>
<command id='show cs7 instance &lt;0-15&gt; sccp timers'>
<params>
<param name='show' doc='Show running system information' />
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='An instance of the SS7 stack' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
<param name='sccp' doc='Signaling Connection Control Part' />
<param name='timers' doc='Show List of SCCP timers' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|ss|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
<param name='cc' doc='Layer3 Call Control (CC)' />
<param name='mm' doc='Layer3 Mobility Management (MM)' />
<param name='rr' doc='Layer3 Radio Resource (RR)' />
<param name='mncc' doc='MNCC API for Call Control application' />
<param name='pag' doc='Paging Subsystem' />
<param name='msc' doc='Mobile Switching Center' />
<param name='mgcp' doc='Media Gateway Control Protocol' />
<param name='ho' doc='Hand-Over' />
<param name='db' doc='Database Layer' />
<param name='ref' doc='Reference Counting' />
<param name='ctrl' doc='Control interface' />
<param name='smpp' doc='SMPP interface for external SMS apps' />
<param name='ranap' doc='Radio Access Network Application Part Protocol' />
<param name='vlr' doc='Visitor Location Register' />
<param name='iucs' doc='Iu-CS Protocol' />
<param name='bssap' doc='BSSAP Protocol (A Interface)' />
<param name='sgs' doc='SGs Interface (SGsAP)' />
<param name='ss' doc='Supplementary Services' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|ss|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
<param name='cc' doc='Layer3 Call Control (CC)' />
<param name='mm' doc='Layer3 Mobility Management (MM)' />
<param name='rr' doc='Layer3 Radio Resource (RR)' />
<param name='mncc' doc='MNCC API for Call Control application' />
<param name='pag' doc='Paging Subsystem' />
<param name='msc' doc='Mobile Switching Center' />
<param name='mgcp' doc='Media Gateway Control Protocol' />
<param name='ho' doc='Hand-Over' />
<param name='db' doc='Database Layer' />
<param name='ref' doc='Reference Counting' />
<param name='ctrl' doc='Control interface' />
<param name='smpp' doc='SMPP interface for external SMS apps' />
<param name='ranap' doc='Radio Access Network Application Part Protocol' />
<param name='vlr' doc='Visitor Location Register' />
<param name='iucs' doc='Iu-CS Protocol' />
<param name='bssap' doc='BSSAP Protocol (A Interface)' />
<param name='sgs' doc='SGs Interface (SGsAP)' />
<param name='ss' doc='Supplementary Services' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
<command id='show neighbor'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
</params>
</command>
<command id='show neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='ran-pc' doc='SCCP point code of RAN peer' />
<param name='msc-ipa-name' doc='GSUP IPA name of target MSC' />
<param name='RAN_PC_OR_MSC_IPA_NAME' doc='Point code or MSC IPA name value' />
</params>
</command>
<command id='show neighbor (a|iu)'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
</params>
</command>
<command id='show neighbor (a|iu) lac &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='lac' doc='Handover target cell by LAC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
</params>
</command>
<command id='show neighbor (a|iu) lac-ci &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='lac-ci' doc='Handover target cell by LAC and CI' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor (a|iu) cgi &lt;0-999&gt; &lt;0-999&gt; &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='a' doc='Neighbor on GERAN-A' />
<param name='iu' doc='Neighbor on UTRAN-Iu' />
<param name='cgi' doc='Handover target cell by Cell-Global Identifier (MCC, MNC, LAC, CI)' />
<param name='&lt;0-999&gt;' doc='MCC' />
<param name='&lt;0-999&gt;' doc='MNC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor lac &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='lac' doc='Handover target cell by LAC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
</params>
</command>
<command id='show neighbor lac-ci &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='lac-ci' doc='Handover target cell by LAC and CI' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show neighbor cgi &lt;0-999&gt; &lt;0-999&gt; &lt;0-65535&gt; &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='neighbor' doc='Show Handover targets' />
<param name='cgi' doc='Handover target cell by Cell-Global Identifier (MCC, MNC, LAC, CI)' />
<param name='&lt;0-999&gt;' doc='MCC' />
<param name='&lt;0-999&gt;' doc='MNC' />
<param name='&lt;0-65535&gt;' doc='LAC' />
<param name='&lt;0-65535&gt;' doc='CI' />
</params>
</command>
<command id='show timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN]'>
<params>
<param name='show' doc='Show running system information' />
<param name='timer' doc='Show timers' />
<param name='[mgw]' doc='MGW (Media Gateway) interface' />
<param name='[mncc]' doc='MNCC (Mobile Network Call Control) interface' />
<param name='[sccp]' doc='SCCP (Signalling Connection Control Part)' />
<param name='[geran]' doc='GERAN (GSM EDGE Radio Access Network)' />
<param name='[utran]' doc='UTRAN (UMTS Terrestrial Radio Access Network)' />
<param name='[sgs]' doc='SGs interface towards MME' />
<param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format &apos;1234&apos; or &apos;T1234&apos; or &apos;t1234&apos;; Osmocom-specific timer number of the format: &apos;X1234&apos; or &apos;x1234&apos;.' />
</params>
</command>
<command id='show fsm NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='NAME' doc='Display information about a single named finite state machine' />
</params>
</command>
<command id='show fsm all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='all' doc='Display a list of all registered finite state machines' />
</params>
</command>
<command id='show fsm-instances NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id='show fsm-instances all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
<command id='show sgs-connections'>
<params>
<param name='show' doc='Show running system information' />
<param name='sgs-connections' doc='Show SGs interface connections / MMEs' />
</params>
</command>
<command id='show subscriber (msisdn|extension|imsi|tmsi|id) ID [(conn|trans|conn+trans)]'>
<params>
<param name='show' doc='Show running system information' />
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='[conn]' doc='Show child connections' />
<param name='[trans]' doc='Show child transactions' />
<param name='[conn+trans]' doc='Show child connections and transactions' />
</params>
</command>
<command id='show subscriber cache [(conn|trans|conn+trans)]'>
<params>
<param name='show' doc='Show running system information' />
<param name='subscriber' doc='Show information about subscribers' />
<param name='cache' doc='Display contents of subscriber cache' />
<param name='[conn]' doc='Show child connections' />
<param name='[trans]' doc='Show child transactions' />
<param name='[conn+trans]' doc='Show child connections and transactions' />
</params>
</command>
<command id='show bsc'>
<params>
<param name='show' doc='Show running system information' />
<param name='bsc' doc='BSC' />
</params>
</command>
<command id='show connection [trans]'>
<params>
<param name='show' doc='Show running system information' />
<param name='connection' doc='Subscriber Connections' />
<param name='[trans]' doc='Show child transactions of each connection' />
</params>
</command>
<command id='show transaction'>
<params>
<param name='show' doc='Show running system information' />
<param name='transaction' doc='Transactions' />
</params>
</command>
<command id='sms send pending'>
<params>
<param name='sms' doc='SMS related commands' />
<param name='send' doc='SMS Sending related commands' />
<param name='pending' doc='Send all pending SMS' />
</params>
</command>
<command id='sms delete expired'>
<params>
<param name='sms' doc='SMS related commands' />
<param name='delete' doc='SMS Database related commands' />
<param name='expired' doc='Delete all expired SMS' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='sms' doc='SMS Operations' />
<param name='sender' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='SENDER_ID' doc='Identifier for the subscriber' />
<param name='send' doc='Send SMS' />
<param name='.LINE' doc='Actual SMS Text' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-sms' doc='Silent SMS Operations' />
<param name='sender' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='SENDER_ID' doc='Identifier for the subscriber' />
<param name='send' doc='Send SMS' />
<param name='.LINE' doc='Actual SMS Text' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/h|tch/any|sdcch) (signalling|speech-hr|speech-fr|speech-efr|speech-amr) [IP] [&lt;0-65535&gt;]'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-call' doc='Silent call operation' />
<param name='start' doc='Start silent call' />
<param name='any' doc='Any channel' />
<param name='tch/f' doc='TCH/F channel' />
<param name='tch/h' doc='TCH/H channel' />
<param name='tch/any' doc='Any TCH channel' />
<param name='sdcch' doc='SDCCH channel' />
<param name='signalling' doc='Signalling only' />
<param name='speech-hr' doc='Speech with HR codec' />
<param name='speech-fr' doc='Speech with FR codec' />
<param name='speech-efr' doc='Speech with EFR codec' />
<param name='speech-amr' doc='Speech with AMR codec' />
<param name='[IP]' doc='Target IP for RTP traffic (default 127.0.0.1)' />
<param name='[&lt;0-65535&gt;]' doc='Target port for RTP traffic (default: 4000)' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='silent-call' doc='Silent call operation' />
<param name='stop' doc='Stop silent call' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
<param name='0' doc='Alerting Level 0' />
<param name='1' doc='Alerting Level 1' />
<param name='2' doc='Alerting Level 2' />
<param name='.TEXT' doc='Text of USSD message to send' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
<param name='close-loop' doc='Close a TCH Loop inside the MS' />
<param name='a' doc='Loop Type A' />
<param name='b' doc='Loop Type B' />
<param name='c' doc='Loop Type C' />
<param name='d' doc='Loop Type D' />
<param name='e' doc='Loop Type E' />
<param name='f' doc='Loop Type F' />
<param name='i' doc='Loop Type I' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
<param name='open-loop' doc='Open a TCH Loop inside the MS' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID paging'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='paging' doc='Issue an empty Paging for the subscriber (for debugging)' />
</params>
</command>
<command id='show statistics'>
<params>
<param name='show' doc='Show running system information' />
<param name='statistics' doc='Display network statistics' />
</params>
</command>
<command id='show sms-queue'>
<params>
<param name='show' doc='Show running system information' />
<param name='sms-queue' doc='Display SMSqueue statistics' />
</params>
</command>
<command id='logging filter imsi IMSI'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='imsi' doc='Filter log messages by IMSI' />
<param name='IMSI' doc='IMSI to be used as filter' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID expire'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='expire' doc='Expire the subscriber Now' />
</params>
</command>
<command id='sms-queue trigger'>
<params>
<param name='sms-queue' doc='SMS Queue' />
<param name='trigger' doc='Trigger sending messages' />
</params>
</command>
<command id='sms-queue max-pending &lt;1-500&gt;'>
<params>
<param name='sms-queue' doc='SMS Queue' />
<param name='max-pending' doc='SMS to deliver in parallel' />
<param name='&lt;1-500&gt;' doc='Amount' />
</params>
</command>
<command id='sms-queue clear'>
<params>
<param name='sms-queue' doc='SMS Queue' />
<param name='clear' doc='Clear the queue of pending SMS' />
</params>
</command>
<command id='sms-queue max-failure &lt;1-500&gt;'>
<params>
<param name='sms-queue' doc='SMS Queue' />
<param name='max-failure' doc='Maximum amount of delivery failures' />
<param name='&lt;1-500&gt;' doc='Amount' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms pending-send'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='sms' doc='SMS Operations' />
<param name='pending-send' doc='Send pending SMS' />
</params>
</command>
<command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms delete-all'>
<params>
<param name='subscriber' doc='Operations on a Subscriber' />
<param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
<param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
<param name='imsi' doc='Identify subscriber by IMSI' />
<param name='tmsi' doc='Identify subscriber by TMSI' />
<param name='id' doc='Legacy alias for &apos;imsi&apos;' />
<param name='ID' doc='Identifier for the subscriber' />
<param name='sms' doc='SMS Operations' />
<param name='delete-all' doc='Delete all SMS to be delivered to this subscriber -- WARNING: the SMS data for all unsent SMS for this subscriber WILL BE LOST.' />
</params>
</command>
<command id='show smpp esme'>
<params>
<param name='show' doc='Show running system information' />
<param name='smpp' doc='SMPP Interface' />
<param name='esme' doc='SMPP External SMS Entity' />
</params>
</command>
</node>
<node id='config'>
<name>config</name>
<command id='hostname WORD'>
<params>
<param name='hostname' doc='Set system&apos;s network name' />
<param name='WORD' doc='This system&apos;s network name' />
</params>
</command>
<command id='no hostname [HOSTNAME]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='hostname' doc='Reset system&apos;s network name' />
<param name='[HOSTNAME]' doc='Host name of this router' />
</params>
</command>
<command id='password (8|) WORD'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN line password string' />
</params>
</command>
<command id='password LINE'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
</params>
</command>
<command id='enable password (8|) WORD'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
</params>
</command>
<command id='enable password LINE'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
</params>
</command>
<command id='no enable password'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
</params>
</command>
<command id='banner motd default'>
<params>
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
<param name='default' doc='Default string' />
</params>
</command>
<command id='banner motd file [FILE]'>
<params>
<param name='banner' doc='Set banner' />
<param name='motd' doc='Banner for motd' />
<param name='file' doc='Banner from a file' />
<param name='[FILE]' doc='Filename' />
</params>
</command>
<command id='no banner motd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
</params>
</command>
<command id='service terminal-length &lt;0-512&gt;'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='no service terminal-length [&lt;0-512&gt;]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='line vty'>
<params>
<param name='line' doc='Configure a terminal line' />
<param name='vty' doc='Virtual terminal' />
</params>
</command>
<command id='service advanced-vty'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='no service advanced-vty'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='cs7 instance &lt;0-15&gt;'>
<params>
<param name='cs7' doc='ITU-T Signaling System 7' />
<param name='instance' doc='Configure a SS7 Instance' />
<param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
</params>
</command>
<command id='ctrl'>
<params>
<param name='ctrl' doc='Configure the Control Interface' />
</params>
</command>
<command id='log stderr'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='no log stderr'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='log file .FILENAME'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='no log file .FILENAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='log alarms &lt;2-32700&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
<param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
</params>
</command>
<command id='no log alarms'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
</params>
</command>
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='authpriv' doc='Security/authorization messages facility' />
<param name='cron' doc='Clock daemon (cron/at) facility' />
<param name='daemon' doc='General system daemon facility' />
<param name='ftp' doc='Ftp daemon facility' />
<param name='lpr' doc='Line printer facility' />
<param name='mail' doc='Mail facility' />
<param name='news' doc='News facility' />
<param name='user' doc='Generic facility' />
<param name='uucp' doc='UUCP facility' />
</params>
</command>
<command id='log syslog local &lt;0-7&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='local' doc='Syslog LOCAL facility' />
<param name='&lt;0-7&gt;' doc='Local facility number' />
</params>
</command>
<command id='no log syslog'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
</params>
</command>
<command id='log gsmtap [HOSTNAME]'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='gsmtap' doc='Logging via GSMTAP' />
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
<command id='stats reporter statsd'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='no stats reporter statsd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='stats reporter log'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='no stats reporter log'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='stats interval &lt;1-65535&gt;'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='interval' doc='Set the reporting interval' />
<param name='&lt;1-65535&gt;' doc='Interval in seconds' />
</params>
</command>
<command id='network'>
<params>
<param name='network' doc='Configure the GSM network' />
</params>
</command>
<command id='msc'>
<params>
<param name='msc' doc='Configure MSC options' />
</params>
</command>
<command id='sgs'>
<params>
<param name='sgs' doc='Configure the SGs interface' />
</params>
</command>
<command id='mncc-int'>
<params>
<param name='mncc-int' doc='Configure internal MNCC handler' />
</params>
</command>
<command id='hlr'>
<params>
<param name='hlr' doc='Configure connection to the HLR' />
</params>
</command>
<command id='smpp'>
<params>
<param name='smpp' doc='Configure SMPP SMS Interface' />
</params>
</command>
</node>
<node id='config-log'>
<name>config-log</name>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|ss|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
<param name='cc' doc='Layer3 Call Control (CC)' />
<param name='mm' doc='Layer3 Mobility Management (MM)' />
<param name='rr' doc='Layer3 Radio Resource (RR)' />
<param name='mncc' doc='MNCC API for Call Control application' />
<param name='pag' doc='Paging Subsystem' />
<param name='msc' doc='Mobile Switching Center' />
<param name='mgcp' doc='Media Gateway Control Protocol' />
<param name='ho' doc='Hand-Over' />
<param name='db' doc='Database Layer' />
<param name='ref' doc='Reference Counting' />
<param name='ctrl' doc='Control interface' />
<param name='smpp' doc='SMPP interface for external SMS apps' />
<param name='ranap' doc='Radio Access Network Application Part Protocol' />
<param name='vlr' doc='Visitor Location Register' />
<param name='iucs' doc='Iu-CS Protocol' />
<param name='bssap' doc='BSSAP Protocol (A Interface)' />
<param name='sgs' doc='SGs Interface (SGsAP)' />
<param name='ss' doc='Supplementary Services' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logging filter imsi IMSI'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='imsi' doc='Filter log messages by IMSI' />
<param name='IMSI' doc='IMSI to be used as filter' />
</params>
</command>
</node>
<node id='config-stats'>
<name>config-stats</name>
<command id='local-ip ADDR'>
<params>
<param name='local-ip' doc='Set the IP address to which we bind locally' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='no local-ip'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='local-ip' doc='Set the IP address to which we bind locally' />
</params>
</command>
<command id='remote-ip ADDR'>
<params>
<param name='remote-ip' doc='Set the remote IP address to which we connect' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='remote-port &lt;1-65535&gt;'>
<params>
<param name='remote-port' doc='Set the remote port to which we connect' />
<param name='&lt;1-65535&gt;' doc='Remote port number' />
</params>
</command>
<command id='mtu &lt;100-65535&gt;'>
<params>
<param name='mtu' doc='Set the maximum packet size' />
<param name='&lt;100-65535&gt;' doc='Size in byte' />
</params>
</command>
<command id='no mtu'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='mtu' doc='Set the maximum packet size' />
</params>
</command>
<command id='prefix PREFIX'>
<params>
<param name='prefix' doc='Set the item name prefix' />
<param name='PREFIX' doc='The prefix string' />
</params>
</command>
<command id='no prefix'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='prefix' doc='Set the item name prefix' />
</params>
</command>
<command id='level (global|peer|subscriber)'>
<params>
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Report global groups only' />
<param name='peer' doc='Report global and network peer related groups' />
<param name='subscriber' doc='Report global, peer, and subscriber groups' />
</params>
</command>
<command id='enable'>
<params>
<param name='enable' doc='Enable the reporter' />
</params>
</command>
<command id='disable'>
<params>
<param name='disable' doc='Disable the reporter' />
</params>
</command>
</node>
<node id='config-line'>
<name>config-line</name>
<command id='login'>
<params>
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='no login'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='bind A.B.C.D [&lt;0-65535&gt;]'>
<params>
<param name='bind' doc='Accept VTY telnet connections on local interface' />
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
<param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
</params>
</command>
</node>
<node id='config-ctrl'>
<name>config-ctrl</name>
<command id='bind A.B.C.D'>
<params>
<param name='bind' doc='Set bind address to listen for Control connections' />
<param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
</params>
</command>
</node>
<node id='config-cs7'>
<name>config-cs7</name>
<command id='description .TEXT'>
<params>
<param name='description' doc='Save human-readable description of the object' />
<param name='.TEXT' doc='Text until the end of the line' />
</params>
</command>
<command id='network-indicator (international | national | reserved | spare)'>
<params>
<param name='network-indicator' doc='Configure the Network Indicator' />
<param name='international' doc='International Network' />
<param name='national' doc='National Network' />
<param name='reserved' doc='Reserved Network' />
<param name='spare' doc='Spare Network' />
</params>
</command>
<command id='point-code POINT_CODE'>
<params>
<param name='point-code' doc='Configure the local Point Code' />
<param name='POINT_CODE' doc='Point Code' />
</params>
</command>
<command id='point-code format &lt;1-24&gt; [&lt;1-23&gt;] [&lt;1-22&gt;]'>
<params>
<param name='point-code' doc='Point Code' />
<param name='format' doc='Configure Point Code Format' />
<param name='&lt;1-24&gt;' doc='Length of first PC component' />
<param name='[&lt;1-23&gt;]' doc='Length of second PC component' />
<param name='[&lt;1-22&gt;]' doc='Length of third PC component' />
</params>
</command>
<command id='point-code format default'>
<params>
<param name='point-code' doc='Point Code' />
<param name='format' doc='Configure Point Code Format' />
<param name='default' doc='Default Point Code Format (3.8.3)' />
</params>
</command>
<command id='point-code delimiter (default|dash)'>
<params>
<param name='point-code' doc='Point Code' />
<param name='delimiter' doc='Configure Point Code Delimiter' />
<param name='default' doc='Use dot as delimiter' />
<param name='dash' doc='User dash as delimiter' />
</params>
</command>
<command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'>
<params>
<param name='xua' doc='SIGTRAN xxxUA related' />
<param name='rkm' doc='Routing Key Management' />
<param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' />
<param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' />
<param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' />
</params>
</command>
<command id='asp NAME &lt;0-65535&gt; &lt;0-65535&gt; (sua|m3ua|ipa)'>
<params>
<param name='asp' doc='Configure Application Server Process' />
<param name='NAME' doc='Name of ASP' />
<param name='&lt;0-65535&gt;' doc='Remote SCTP port number' />
<param name='&lt;0-65535&gt;' doc='Local SCTP port number' />
<param name='sua' doc='SCCP User Adaptation' />
<param name='m3ua' doc='MTP3 User Adaptation' />
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
</params>
</command>
<command id='no asp NAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='asp' doc='Disable Application Server Process' />
<param name='NAME' doc='Name of ASP' />
</params>
</command>
<command id='as NAME (sua|m3ua|ipa)'>
<params>
<param name='as' doc='Configure an Application Server' />
<param name='NAME' doc='Name of the Application Server' />
<param name='sua' doc='SCCP User Adaptation' />
<param name='m3ua' doc='MTP3 User Adaptation' />
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
</params>
</command>
<command id='no as NAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='as' doc='Disable Application Server' />
<param name='NAME' doc='Name of AS' />
</params>
</command>
<command id='sccp-address NAME'>
<params>
<param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' />
<param name='NAME' doc='Name of the SCCP Address' />
</params>
</command>
<command id='no sccp-address NAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='sccp-address' doc='Delete an SCCP addressbook entry' />
<param name='NAME' doc='Name of the SCCP Address' />
</params>
</command>
<command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) &lt;1-999999&gt;'>
<params>
<param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' />
<param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' />
<param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' />
<param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' />
<param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' />
<param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' />
<param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' />
<param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' />
<param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' />
<param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' />
<param name='&lt;1-999999&gt;' doc='Timer value, in seconds' />
</params>
</command>
</node>
<node id='config-cs7-as'>
<name>config-cs7-as</name>
<command id='description .TEXT'>
<params>
<param name='description' doc='Save human-readable description of the object' />
<param name='.TEXT' doc='Text until the end of the line' />
</params>
</command>
<command id='asp NAME'>
<params>
<param name='asp' doc='Specify that a given ASP is part of this AS' />
<param name='NAME' doc='Name of ASP to be added to AS' />
</params>
</command>
<command id='no asp NAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='asp' doc='Specify ASP to be removed from this AS' />
<param name='NAME' doc='Name of ASP to be removed' />
</params>
</command>
<command id='traffic-mode (broadcast | loadshare | roundrobin | override)'>
<params>
<param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' />
<param name='broadcast' doc='Broadcast to all ASP within AS' />
<param name='loadshare' doc='Share Load among all ASP within AS' />
<param name='roundrobin' doc='Round-Robin between all ASP within AS' />
<param name='override' doc='Override' />
</params>
</command>
<command id='recovery-timeout &lt;1-2000&gt;'>
<params>
<param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' />
<param name='&lt;1-2000&gt;' doc='Recovery Timeout in Milliseconds' />
</params>
</command>
<command id='qos-class &lt;0-255&gt;'>
<params>
<param name='qos-class' doc='Specity QoS Class of AS' />
<param name='&lt;0-255&gt;' doc='QoS Class of AS' />
</params>
</command>
<command id='routing-key RCONTEXT DPC'>
<params>
<param name='routing-key' doc='Define a routing key' />
<param name='RCONTEXT' doc='Routing context number' />
<param name='DPC' doc='Destination Point Code' />
</params>
</command>
<command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'>
<params>
<param name='routing-key' doc='Define a routing key' />
<param name='RCONTEXT' doc='Routing context number' />
<param name='DPC' doc='Destination Point Code' />
<param name='si' doc='Match on Service Indicator' />
<param name='aal2' doc='ATM Adaption Layer 2' />
<param name='bicc' doc='Bearer Independent Call Control' />
<param name='b-isup' doc='Broadband ISDN User Part' />
<param name='h248' doc='H.248' />
<param name='isup' doc='ISDN User Part' />
<param name='sat-isup' doc='Sattelite ISDN User Part' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='tup' doc='Telephony User Part' />
</params>
</command>
<command id='routing-key RCONTEXT DPC ssn SSN'>
<params>
<param name='routing-key' doc='Define a routing key' />
<param name='RCONTEXT' doc='Routing context number' />
<param name='DPC' doc='Destination Point Code' />
<param name='ssn' doc='Match on Sub-System Number' />
<param name='SSN' doc='Sub-System Number to match on' />
</params>
</command>
<command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'>
<params>
<param name='routing-key' doc='Define a routing key' />
<param name='RCONTEXT' doc='Routing context number' />
<param name='DPC' doc='Destination Point Code' />
<param name='si' doc='Match on Service Indicator' />
<param name='aal2' doc='ATM Adaption Layer 2' />
<param name='bicc' doc='Bearer Independent Call Control' />
<param name='b-isup' doc='Broadband ISDN User Part' />
<param name='h248' doc='H.248' />
<param name='isup' doc='ISDN User Part' />
<param name='sat-isup' doc='Sattelite ISDN User Part' />
<param name='sccp' doc='Signalling Connection Control Part' />
<param name='tup' doc='Telephony User Part' />
<param name='ssn' doc='Match on Sub-System Number' />
<param name='SSN' doc='Sub-System Number to match on' />
</params>
</command>
<command id='point-code override dpc PC'>
<params>
<param name='point-code' doc='Point Code Specific Features' />
<param name='override' doc='Override (force) a point-code to hard-coded value' />
<param name='dpc' doc='Override Source Point Code' />
<param name='PC' doc='Override Destination Point Code' />
</params>
</command>
<command id='point-code override patch-sccp (disabled|both)'>
<params>
<param name='point-code' doc='Point Code Specific Features' />
<param name='override' doc='Override (force) a point-code to hard-coded value' />
<param name='patch-sccp' doc='Patch point code values into SCCP called/calling address' />
<param name='disabled' doc='Don&apos;t patch any point codes into SCCP called/calling address' />
<param name='both' doc='Patch both origin and destination point codes into SCCP called/calling address' />
</params>
</command>
</node>
<node id='config-cs7-asp'>
<name>config-cs7-asp</name>
<command id='description .TEXT'>
<params>
<param name='description' doc='Save human-readable description of the object' />
<param name='.TEXT' doc='Text until the end of the line' />
</params>
</command>
<command id='remote-ip A.B.C.D'>
<params>
<param name='remote-ip' doc='Specify Remote IP Address of ASP' />
<param name='A.B.C.D' doc='Remote IP Address of ASP' />
</params>
</command>
<command id='local-ip A.B.C.D'>
<params>
<param name='local-ip' doc='Specify Local IP Address from which to contact ASP' />
<param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' />
</params>
</command>
<command id='qos-class &lt;0-255&gt;'>
<params>
<param name='qos-class' doc='Specify QoS Class of ASP' />
<param name='&lt;0-255&gt;' doc='QoS Class of ASP' />
</params>
</command>
<command id='role (sg|asp|ipsp)'>
<params>
<param name='role' doc='Specify the xUA role for this ASP' />
<param name='sg' doc='SG (Signaling Gateway)' />
<param name='asp' doc='ASP (Application Server Process)' />
<param name='ipsp' doc='IPSP (IP Signalling Point)' />
</params>
</command>
<command id='sctp-role (client|server)'>
<params>
<param name='sctp-role' doc='Specify the SCTP role for this ASP' />
<param name='client' doc='Operate as SCTP client; connect to a server' />
<param name='server' doc='Operate as SCTP server; wait for client connections' />
</params>
</command>
<command id='block'>
<params>
<param name='block'