osmo-msc/debian/control

182 lines
5.9 KiB
Plaintext

Source: openbsc
Maintainer: Harald Welte <laforge@gnumonks.org>
Section: net
Priority: optional
Build-Depends: debhelper (>= 9),
autotools-dev,
autoconf-archive,
pkg-config,
libgtp0-dev,
libosmocore-dev,
libosmo-sccp-dev,
libdbi0-dev,
dh-autoreconf,
libosmo-abis-dev,
libosmo-netif-dev,
libdbd-sqlite3,
libpcap-dev,
libssl-dev,
libc-ares-dev,
libsmpp34-dev
Standards-Version: 3.9.8
Vcs-Git: git://bs11-abis.gnumonks.org/openbsc.git
Vcs-Browser: http://openbsc.osmocom.org/trac/browser
Homepage: https://projects.osmocom.org/projects/openbsc
Package: osmocom-bsc
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Description: GSM Base Station Controller
This is the BSC-only version of OpenBSC. It requires a Mobile Switching Center
(MSC) to operate.
.
You might rather prefer to use osmocom-nitb which is considered a
"GSM Network-in-a-Box" and does not depend on a MSC.
Package: osmocom-nitb
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends},
libdbd-sqlite3
Description: GSM Network-in-a-Box, implements BSC, MSC, SMSC, HLR, VLR
This is the Network-in-a-Box version of OpenBSC. It has all the GSM network
components bundled together. When using osmocom-nitb, there is no need for a
Mobile Switching Center (MSC) which is needed when using osmocom-bsc.
Package: osmocom-ipaccess-utils
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Description: Command line utilities for ip.access nanoBTS
This package contains utilities that are specific for nanoBTS when being used
together with OpenBSC. It contains mainly three tools: ipaccess-find,
ipaccess-config and ipaccess-proxy.
Package: osmocom-bs11-utils
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Description: Command line utilities for Siemens BS-11 BTS
There is a tool in this package for configuring the Siemens BS-11 BTS.
Additionally, it contains one tool for making use of an ISDN-card and the
public telephone network as frequency standard for the E1 line.
Package: osmocom-sgsn
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Suggests: osmocom-bsc
Description: Osmocom Serving GPRS Support Node
This is an implementation of the GPRS Serving GPRS Support Node (SGSN). As
such it implements the GPRS Mobility Management (GMM) and SM (Session
Management).
.
The SGSN connects via the Gb-interface to the BSS (like the osmo-pcu or an
ip.access nanoBTS), and it connects via the GTP protocol to a Gateway GPRS
Support Node (GGSN) like openggsn.
Package: osmocom-gbproxy
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Recommends: osmocom-sgsn
Description: Osmocom GPRS Gb Interface Proxy
The purpose of the Gb proxy is to aggregate the Gb links of multiple
BSS's and present them in one Gb link to the SGSN.
.
This package is part of OpenBSC and closely related to osmocom-sgsn.
Package: osmocom-bsc-nat
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends}
Recommends: osmocom-bsc
Description: Osmocom Base Station Controller Network Address Translation
This NAT is useful for masquerading multiple BSCs behind one. It listens
for incoming BSCs on port 5000 and connects to a specified Mobile Switching
Center (MSC).
.
This package is part of OpenBSC and closely related to osmocom-bsc.
Package: openbsc-dev
Architecture: all
Depends: ${misc:Depends}
Description: Header file needed by tools tightly integrated
Some other programs depend on gsm_data_shared.h and gsm_data_shared.c
from OpenBSC. This package installs these files to your file system so
that the other packages can build-depend on this package.
.
The directory structure is copied after the structure in the repository
and the header and .c file are installed into /usr/src/osmocom/openbsc/.
Package: osmo-gtphub
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: Osmocom GTP Hub
Proxy for comms between multiple SGSNs and GGSNs.
Package: osmocom-bsc-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bsc (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC BSC
Make debugging possible
Package: osmocom-nitb-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-nitb (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC NITB
Make debugging possible
Package: osmocom-ipaccess-utils-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-ipaccess-utils (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC ip.access utils
Make debugging possible
Package: osmocom-bs11-utils-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bs11-utils (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC BS11 utils
Make debugging possible
Package: osmocom-sgsn-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-sgsn (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC Serving GPRS Support Node
Make debugging possible
Package: osmocom-gbproxy-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-gbproxy (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC GPRS GBProxy
Make debugging possible
Package: osmocom-bsc-nat-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC Network Address Translation
Make debugging possible
Package: osmo-gtphub-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmo-gtphub (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for Osmocom GTP Hub
Make debugging possible