The 08.08 API will interface with the internal BSC code and it is
the boundary between MSC and BSC. So nothing that calls the BSC
functionality should know about lchan or such.
Change the MSC transaction code to operate on a GSM Subscriber Connection
instead of the lchan. This will help us to separate the two commands properly.
Together with the previos -e Number option one can easily turn on
debugging without needing to remember the category masks for a quick
check on what is going on.
When we are on a TCH/H or TCH/F always use the SACH for SAPI!=0
for the establishment otherwise it will never be answered. This
can be tested by starting to page with a traffic channel and then
trying to submit the SMS.
The code in 354ef81d80 checked
for fd >= 0 but on startup the struct is memset to 0 so this
test is true. Initialize the fds to -1 to make the code work
and be able to handle all ranges of the fd.
Attempt to read the three byte IPA header. If we read 0 then
the socket can be closed otherwise we need to read three bytes, if
we don't we do have a failure.
After having parsed the header we need to evaluate the length,
if the length is bigger than would fit into our buffer we will
ignore that and print an error.
This is fixing a crash when the BTS is crashing...
This code used to be a sleep, it was changed to be a timer by Andreas
but this timer does not seem to have any use. When doing the sw load
this timer is increasing the upload time dramatically, reduce it to
make it work faster.
Currently one has to put -w in front of -f to really write the
firmware file to disk. Change the config handling to first take
all parameters and then execute on them. This means -f can now
be used with any other parameter.
Fix a infinite loop when establishing a new RSL connection and the
BSC is identifying itself with a unit id of an already established
RSL connection. The infinite loops happens because we are corrupting
the the linuxlist inside the bsc_fd when registering the bfd twice.
Due the lack of proper authentication favor the new RSL connection
as the real one and close the previous one.
This new gprs-conf branch is intended to contain everything needed
to configure GPRS in the nanoBTS, but without implementing the SGSN/GGSN
functionality.
The SGSN/GGSN development will happen in a branch based on this branch
called "gprs-sgsn"
Use the start address inside the header entry, the start is relative
to the surrounding SDP record which is located in our base offset, when
writing it out also ignore four bytes of something (crc?).
* The length of the table is not at a fixed position. We will need
to read the offset, seek there, read the data, convert it to the
host endianes.
* Prepare the code to work with offsets of 0...
Holger Hans Peter Freyther
Harald Welte