Allow to change the refcount for a given channel. Store which
bts is our primary bts. A command to switch the primary bts will
be added as well. This makes entering and parsing of commands more
easy.
Really compare pointers to check if the one gsm_subscriber
is equal to the other... gsm_subscriber should be unique for
a given IMSI so comparing the pointers should be fine.
Removing the P Bit from the fake LAPD frame will make wireshark
run the data through the GSM RSL dissector with the right SAPI
and LAPD preference setting.
We need to append the Linux LAPD header for wireshark. This means
that we currently can not support B Channels or such. Maybe we will
need to add another LAPD header.
Make sure that del_timer succeeds and removes an entry from the list. Currently
sending the LOCATION UPDATING REJECT from within the timer will not remove the
list element as ->active gets set to 0 in the timer updating before calling the
callback. Fix the segfault and allow the timer to be removed from within its
own callback.
This might turn into a complete wire protocol with special
client software. For now it will be a simple client interface
that you can use with telnet to do certain things.
This is using flex to implement the parsing. Implementation
and more commands will follow.
The current LAPD control field for indication/disconnect/etc
is wrong and currently we are only interested in the actual
A-Bis data spoken between the BTS and BSC and not on the indication
of the physical line (connection, disconnect, release..)
When using ISDN as network type and using a fake LAPD encapsulation
wireshark should be able to recognize some bits if dump.
Append a dummy LAPD header. It is not clear to me if the Control field
of the LAPD frame is part of the msg or if we need to add it as well.
TODO:
- Do the same for the B Channel
- Write out time
- Check if more of the LAPD frame needs to be prepended. The
information from the mISDNhead comes into mind. Maybe it makes
sense to start a custom wireshark mISDN dissector.
gsm_subscriber is now refcounted, the db backend is leaking
a lot less, db_get_subscriber will allocate the subscr record
now, subscr_* will look up a subscriber in the list of currently
active subscribers and add an ref to this one.
The db test cases pass, more testing will be when next to the bts
Call use_lchan early in allocate_loc_updating_req, do not directly call
rsl_chan_release but go through channel alloc to take the use_count into
account.
As reported by the operator the rejecting didn't work after the
first fix (wrong logic/missing negation). The hypothesis is that
that the lchan was released before the reject timeout was fired.
Fix it by getting a reference on the lchan when allocating a
logical operation and release the reference when the operation
is finished or timed out.
We are going to have logical operations like Phone Call, SMS,
Paging, Updating Request on a logical channel and for each of
these operations we might need to store state. For now pointers
in gsm_lchan look like the best way of doing this and we start
by introducing an operation for the location updating request.
The new flow of things are:
- We get the location updating request and update/create
the subscriber and maybe send the identity requests to
the mobile station
- We start the updating timer, if it times out we will
reject the mobile station.
- Once we get the Identity Responses we have asked for
and the reject timer did not fire yet we might accept
the user.
When a channel is allocated, start a timeout, when a lchan_use
is used the timer will be restarted, when the timeout fires
we will try to recycle or restart the timer.
Holger Freyther
Harald Welte