This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
The exact sequence the states the BTS goes through is slightly
different for one of the nanoBTS 139 I have and it needs this
to start.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
* On start the vty code will call the abis_nm method and this
will set the administrative state to unlock/lock
* During startup the BTS will report its state as well and would
possible overwrite the set administrative. We are only going
to update the administrative if it was 0 before. This appears
to work on all of my tests. In case this will not be the case
for others we will have to split the administrative into two
sets one for the BTS and one for the BSC.
Tweaking theses can be useful especially tx-integer that influence
both the spread of rach attemps and the delay between two attemps.
Looking up GSM 04.08 3.3.1.1.2 & 10.5.2.29 can help determine good
values. The default are choosed with a wide spacing between attemps
(tx integer = 9 -> T=12 & S=217 (non-combined CCCH/SDCCH) or 115 (for
combined CCCH/SDCCH)). This alleviates the problem of responding to
several RACH attempts by a same MS, allocating several RF channels when
only 1 is needed.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This introduces a new LOGP() macro together with LOGL_* definition to
support multiple log levels (severities) throughout the codebase.
Please note that the actual logging system does not use them yet,
in this patch we simply introduce the new macros at the caller site.
With this commit, we can successfully hand over a channel from one cell to
another cell. We implement asynchronous intra-BSC (but inter-BTS) handover.
Changes:
* introduce new DHO log category
* extend rsl_chan_activate_lchan() with argument for HO reference
* introduce actual minimal handover decision making in handover_decision.c
* various fixes to bsc_handover_start() in handover_logic.c
Before this commit, OpenBSC used templates for the SYSTEM INFO
1, 2, 3, 4, 5 and 6 messages. Those templates were patched in
various places to reflect the network config like ARFCN.
Now, we actually generate those SI messages ourselves, using
values from the configuration file, and even calculating neighbor
cell lists.
All bts'es that you have configured in OpenBSC will end up in
the neighbor cell list - which should be more than sufficient for
the current small-single-site networks.
- Make sure that on runtime the Radio Carrier can be
locked and unlocked. The vty code calls into the
Abis NM to lock/unlock the channel and the state is
stored there.
- Make sure that on start the Radio Carries remains
offline and we are not starting it. On start the
radio carrier is either locked or unlocked. This means
the RSL will not connect until the RF is unlocked. It
will connect then. To see RSL bringup failures one
needs to parse the RSL nack message.
- When the TRX is locked on startup the RSL link will
only be established after it will be unlocked.
On cold start the RSL link will not be brought up. Wait for the
Software to be Activated before starting the RSL link. This is
working reliable on the BTS I have tested with.
This is a partial revert of 8406ec2437 and
was discussed on the mailinglist.
bsc_init.c still contained a hard-coded channel configuration,
i.e. CCCH_combined on TS0 of C0, and TCH/F on all other channels.
Now it correctly uses the value as specified in the config file.
Add support for 1900 nanoBTS by using unified bts_type
GSM_BTS_TYPE_NANOBTS for 900, 1800 and 1900 versions.
Reduce the nanoBTS enum values to one and derive the
version from the user supplied band. In the future we
might want to do auto band detection.
The configuration file needs to be changed to refer
to nanobts instead of nanobts900/nanobts1800.
Signed-off-by: Mike Haben <michael.haben@btinternet.com>
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
Transfering the cell_identity from BSC to MSC is required for the
on-waves.com support. Allow to set the cell_identity in the cfg
file and patch the system information tables to set it.
Do not advertize to broadcast on a different frequency, this
was only useful for the HAR2009. The frequency list of the cell
probably needs to migrate into the vty config file.
Revert of ee4410a4f3
Share the initialization and bootstraping of the network by moving
the code to a new file and making boostrap_network and shutdown_net
external.
Cleanup the header list after the move and remove trailing whitespace.
Harald Welte
Sylvain Munaut
Harald Welte