Whenever we call build_tlv() we must
call destroy_tlv() after we are finished with it.
Similarly, smpp34_unpack() makes calls to smpp34_malloc()
and these need to be free'd by us later.
Change-Id: Ic2abcbe78cf7cf7b6ce36fe09aa9b4f8daee973f
Voice group call and voice broadcast call messages as well as assignment
result are forwarded to VGCS/VBS call control.
Change-Id: Ie68eedb8fcb064a55cd71b58630d7a8c8b5f29ad
Related: OS#4854
When sending or receiving BSSMAP reset msg, the ongoing VGCS/VBS SCCP
connections are cleared. E.g. this happens if the BSC is restarted and
there is an ongoing VGCS/VBS call at this BSC.
Change-Id: Ib0b309150b82148098d05cfb1fb18767283e654e
Related: OS#4854
When the calling phone releases the uplink before it has been assigned
to the group channel, it will send an UPLINK RELEASE message on the
dedicated channel.
This message is forwarded to VGCS state machine to handle the release
there.
Change-Id: Ie8f7338da18eaaefbb022c09b96f18a3d78f8a95
Related: OS#4854
Switching ASCI support is controled via VTY. This added in a later
patch. (Chg-Id: I5bd034a62fc8b483f550d29103c2f7587198f590)
Change-Id: Id68deb69f7395f0f8f50b3820e9d51052a34f753
Related: OS#4854
A voice group/broadcast call has no SCCP connection that is related 1:1
to a calling or called subscriber. Instead there are multiple connections
between MSC and BSS. Some of them control the uplink for each BSS and
some of them assign the channels for each BTS.
SCCP connections are maintained by the VGCS call control. Message from the
RAN are directly forwarded to the VGCS call control.
Change-Id: Ie4a2f19ba75140a6f2de02b709597239c01f02a2
Related: OS#4854
There is no GSM0808_DATA_RATE_TRANSP_300 (not in libosmocore and not in
3GPP TS 48.008 § 3.2.11 on which the enum is based). As I understand it,
we need to use GSM0808_DATA_RATE_TRANSP_600.
As pointed out in review, either TCH/H2.4 or TCH/F2.4 would work for
rates below 9600, so use GSM0808_DATA_FULL_PREF.
Use GSM0808_DATA_FULL_BM instead of GSM0808_SPEECH_FULL_BM. The value is
0x8 for both, but this is the correct name.
Related: OS#4394
Change-Id: I7297cc481fbe36355b5231ca800cf566a1ee93c0
VGCS/VBS messages from BSS are decoded and a receiver funktion for
the GCC/BCC (VGCS/VBS call control) is selected.
Change-Id: Ief6259ba3914eeaceb063b562a0bcbc48349ce60
Related: OS#4854
The (optional) call reference is required to assign a calling subscriber
to a voice group/bcast channel. The BSC can then determine to which
existing VGCS/VBS channel the MS is assigned to.
This IE is part of the GSM standard TS 48.008 (see §3.2.1.1)
Change-Id: I7955c6e0eebc930f85f360dda46be17cbd39e181
Related: OS#4854
This is a built-in data structure to store and handle voice group calls.
The GCR will be used by VGCS/VBS call control.
(Chg-Id: I9947403fde8212b66758104443c60aaacc8b1e7b)
The GCR will be used by VTY code.
(Chg-Id: I5bd034a62fc8b483f550d29103c2f7587198f590)
Change-Id: Ia74a4a865f943c5fb388cd28f9406005c92e663e
Related: OS#4854
Generally a transaction is linked with a subscriber (vsub).
A voice group call transaction may not have a subscriber associated. The
vsub field of the transaction will be NULL. If the group call is
initiated by a calling subscriber, the vsub field is set until the
calling subscriber is assigned to the voice group channel. If the group
call is initiated via VTY, vsub field is not set on creation of the
transaction.
Change-Id: I2b9afe95db4c106c141f4b7bd199ec74e197e523
Related: OS#4854
- TRANS_GCC is used for the voice group call.
- TRANS_BCC for the voice broadcast call.
This also includes the use counters for transaction and CM service
request usage:
- MSC_A_USE_GCC
- MSC_A_USE_BCC
- MSC_A_USE_CM_SERVICE_BCC
- MSC_A_USE_CM_SERVICE_GCC
Change-Id: Iddd11f813582ac2ac2bdee91cc3a525986deb514
Related: OS#4854
A transaction can be identified by the callref and the type. Because
transactions with different types may share the same callref value,
it is required to include the type in the trans_find_by_callref()
parameters.
E.g. a voice group call may have the same callref as a voice broadcast
call, but they are different calls. They also may not be confused with
other transaction types having eventually equal callref value, like
GSM 04.08 calls, SMS or supplementary services transactions.
By adding the transaction type to trans_find_by_callref(), we
essentially now use the (type, callref) tuple as unique ID for
transactions, instead of just callref.
Change-Id: Ic0b82033a1aa3c3508ad610c690a5f29073006c1
Related: OS#4854, OS#3294
Allow the caller of rtp_stream_alloc() to define what events will be
dispatched to the parent FSM. This allows other state machines to use
rtp_stream. It is required for using RTP stream process with VGCS FSM.
Drop the unused parent_call_leg member.
Change-Id: I0991927b6d00da08dfd455980645e68281a73a9e
Related: OS#4854
So far rtp_stream_commit() triggers an MGCP MDCX message only when
codecs or the RTP address changed.
Do the same for mode changes. ('sendrecv', 'recvonly', 'sendonly',...)
Change-Id: I7a5637d0a7f1df13133e522fc78ba75eeeb2873e
Related: OS#4854
The MGCP protocol features the 'C' (call-id) to identify which
connections belong to the same call. They may be used by MGW for
accounting or management procedures.
So far we sent the MNCC callref as call-id. Instead, add a separate
unique call_id number space. Assign a unique call_id to each
transaction.
Change-Id: I36c5f159fa0b54fb576ff8bd279928b895554793
Related: OS#4854
Use the MNCC bearer capabilities in CC setup for CSD, if available.
Note that in the MNCC_F_BEARER_CAP code path sdp_audio_codecs_set_csd()
also gets called by trans_cc_set_remote_from_bc().
Related: OS#4394
Change-Id: I56e49ebc41696912a81b8f4f63fbc36d0b605e9e
Check the return code before writing it to unsigned ct->data_rate, as
"ct->data_rate < 0" is never true.
Fixes: CID#321277
Fixes: 106321 ("Add initial CSD support with external MNCC")
Change-Id: I5d77da71b60748818ba631229126c1bf061a9c7d
Prepare to use trans->bearer_cap.transfer in trans_cc_filter_run() to
differentiate between speech and data (CSD).
Related: OS#4394
Change-Id: Id0476a4882bcb27413d033f2de2c5288954f0b95
Move remote out of codecs, as it will be used by CSD code as well.
Otherwise we would need to store it twice (in cc.codecs.remote and
cc.csd.remote).
Related: OS#4394
Change-Id: I5d2e078db3b3437cb6feae40d8955912d7a297e4
Vadim Yanitskiy
Keith Whyte
Andreas Eversberg
Oliver Smith