In the GPRS NS protocol stack, the amount of NS/BSSGP headers like MS RADIO
CAPA INFO can be quite long. In order to fit the full user message and
those headers, we have to enlarge the head/tailroom of the msgb allocations.
On a nanoBTS, this command can be used to manually switch a given 'dynamic
pdch/tch' timeslot from one mode into the other.
There are no safeguards that the timeslot is not in use at the given time.
We send a LU Accept with the TMSI as the MI. According to the
spec the phone should store this new TMSI and send a TMSI
REALLOCATION COMPLETE to us. We will release the LU then and this
should trigger the release procedure.
This was introduced by a recent change to gsm_data.h to include
less header files. We really need to access the RSL information
here so it is fine to include the file.
In commit 39e2eadc99 a bug was introduced
that used the 'trans' after trans_free() had already been called.
This became visible now when the openbsc+lcr combination was calling
an unknown/invalid telephone number in a MO call, resulting in
a segfault.
Currently the nanoBTS bootstrap code requires a high delay
otherwise we are not bringing the device up properly. Changing
the init code turns out harder than it seems like. So this is
a workaround for that to allow a high speed RSL/OML connection
after the bringup.
The line driver can have a default TS delay. It is set to the
current default for the nanoBTS and the BS11. For the ipaccess
case we will set the delay lower for the RSL connection and
inside the ipaccess-config we can set it low right away to
have fast firmware flashing and such.
Instead of sending many messages we will queue the OML
messages and wait for the ACK/NACK before sending the
next message from the queue. We tag the msgb to remember
if we need to wait for an ack or not.
We keep the order of all messages, on ACKs and similiar
occassions we will drown the queue until we reach a message
that needs to be acked and then wait for that ack again.
Possible breakage can appear when we send an OML (e.g.
BS11 specific message) msg which does not need to be acked
through the abis_nm_sendmsg call. The fix will be to use
the _direct version of this method.
Re-Enable as it might have fixed something... who knows.
Conflicts:
openbsc/include/openbsc/abis_nm.h
openbsc/include/openbsc/gsm_data.h
openbsc/src/abis_nm.c
openbsc/src/gsm_data.c
Assume that a NACK is a onetime failure and that on the next
attempt it will work better. If that is not the case we might
even send a reboot to the BTS.
Sometimes the operative change for the NSE is getting nacked,
this might be due that we send it before we get the OPSTART ACK
for this object class. Send it from the CELL availability as
a workaround. This init code needs to be changed to make these
dependencies work more reliable.
Forget about the ho_lchan inside the gsm_subscriber_connection
in case of a handover failure, also clear the gsm_subscriber_connection
pointer before the lchan is passed to the lchan_free routine.
Do not use the NULL context for this allocation. It should hang
off the gsm_subscriber_connection but for now at least make it
the child of the BSC so it is showing up in the talloc report.
Can't declare it in gsm_04_08.h tough ... gsm_cbfn is defined in
gsm_data.h and trying to include that in gsm_04_08 just creates a
huge mess.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The default values are those where the parameters are encoded
as '0' and they're not output in the config file if that case
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Harald Welte
Holger Hans Peter Freyther
Dieter Spaar
Sylvain Munaut