Forward the Kc128 key to the new BSS in BSSMAP Handover Request.
Depends: Ieb6e43eef9e57281d54d4b7c63664668df5aef3e (libosmocore)
Change-Id: Id5ce995a741c8e469a50a0c46e53c06a2378bb7e
Add A5/4 to the internal mask of allowed algorithms.
(Not actually working yet, A5/4 implementation follows in other
patches.)
Related: SYS#5324
Change-Id: I5b46aaa8579f8d069ca39caf996a8795ffe63dd7
Use new API in Cipher Mode Command to prepare for A5/4 support.
Depends: Ib3906085e0c6e5a496a9f755f0f786238a86ca34 (libosmocore)
Related: SYS#5324
Change-Id: Ib238d367b8d5d07b6ab4cb2e48fbf4ce22ca4476
Since recently, osmo-bsc behaves strictly as per specs, meaning it will
only send the "Cell selection indicator after release of all TCH and SDCCH IE"
in RR Channel Release iff:
* "Last Used E-UTRAN PLMN Id" was received in the CommonID sent MSC->BSC
* "Last Used E-UTRAN PLMN Id" was received insider "old BSS to new BSS Information"
in the HandoverRequest sent MSC->BSC.
On the other hand, CSFB_Indicator from ClearCommand MSC->BSC is nw
ignored and not taken into account.
Hence, let's update osmo-msc to also behave correctly by sending the
Last Used E-UTRAN PLMN ID at CommonID tx time to avoid regressions in
CSFB support when running against newer osmo-bsc.
Let's keep sending the CSFB Indicator in ClearCommand as we used too, in
order to keep compatibility with older BSCs (as per spec).
Related: SYS#5337
Change-Id: Ic5f175b179973d0a50d94f00e15f5a3e332605fc
Calling gsm48_cc_tx_release() before mncc_release_ind() has a side
effect: the former may change CC state to GSM_CSTATE_RELEASE_REQ.
This makes the later send MNCC_REL_CNF instead of MNCC_REL_IND, so
if one of the call leg disconnects due to RF failure, the other one
will not be terminated correctly.
Makes both TC_{mo,mt}_call_clear_request TTCN-3 test cases pass.
Change-Id: I3ad4a99757878de3796027325627c87d9a4e93f1
Related: Id16969fe0de04445d1320a96d35cf1d48cc8cf09
Related: SYS#5340
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: Iff66eea9ee70850a4d038ece1d8473457023e1ee
Fixes: OS#4865
The function gsm48_rx_cm_reest_req() is the only one where the return
code of osmo_mobile_identity_decode_from_l3() is not checked, lets check
it here too.
Change-Id: I37981205870b094b3a40a20197461208daa62698
Fixes: CID#211037
We may never be able to deliver this SMS if it depends on the ESME, as we will
not resubmit the SMS to the ESME. Better to reject it at this time and have the MS
try again later.
Change-Id: I2c50904349dd4ed229b60b8468d776b817c0bd44
Related: OS#4740
The struct gsm_mncc which is created and populated in mncc_call_tx_setup_ind
casted to a union mncc_msg* pointer. This leads to a memory overrun
in mncc_call_tx because the union mncc_msg is larger then the gsm_mncc struct.
To fix this, lets just declare a union mncc_msg and populate the signal
member inside it. This can be handed over to mncc_call_tx. The data in
it will look the same, except that the memory will have the proper
lenght (longer).
Change-Id: Ifff28b3375d6bd5e4f837f25c46736952f7bfa9b
Fixes: CID 214330
Timer X1 is not defined in libosmo-mgcp-client, so this tdef had no effect.
Change this to X2427.
(libosmo-mgcp-client recently moved T2427001 to X2427.)
(X2 is still used in call_leg.c itself)
Related: OS#4539
Related: If097f52701fd81f29bcca1d252f4fb4fca8a04f7 (osmo-mgw)
Change-Id: I9804fdb2c24f49910f2386e3788bd1107b8ebc40
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
"127.0.0.1" is changed to "localhost" to let local NSS decide whether to
use IPv4 or IPv6. In newish systems, IPv6 ::1 will be selected since
IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail. In any case, since
the default remote address is a local one and it's the client side,
there's no real logical change since the kernel would anyway should have
taken a local address anyway.
Change-Id: I05a5c792ab1d053c6f38ba36d4b9fa6db293fbd0
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
Otherwise, each time the 3GPP TS 44.014 MS test commands (TCH loop)
are invoked, both subscriber_mstest_{close,open} functions add +1
to the subscriber's reference count, but never revoke it.
Change-Id: I0cefa5b5a0cb712080ba2afd322db329f19608e3
This byte is redundant, and must not be allocated in this function.
A consequence of this error is that the MS alwats interprets the
"Sub-channel" IE as test loop A regardless of the specified type.
Here is an example of malformed Close TCH loop (type C) message:
0f 00 00 04
x. .. .. .. - Skip indicator (see 3GPP TS 24.007)
.x .. .. .. - Protocol discriminator (see 3GPP TS 24.007)
.. xx .. .. - Message type (CLOSE_TCH_LOOP_CMD)
.. .. !! .. - (!) Redundant byte from create_gsm0414_msg()
.. .. .. xx - (!) The actual "Sub-channel" IE (loop C, X=0)
Change-Id: Ia47225b884439dcd43be307e7351994e55fcd50d
So far, by failing to initialize the cause value, we always send a Clear
Command cause == 0, which actually means "Radio Interface Message Failure".
This is seen in all my logged network traces of osmo-msc lab testing.
"Call Control" seems to be the only cause value that remotely fits a normal
release procedure, even if it was not voice call related, see 3GPP TS 48.008
3.2.1.21.
Related: OS#4664
Change-Id: I1347ed72ae7d7ea73a557b866e764819c5ef8c42
new_id_ptr should be passed as NULL if encoding the TMSI failed, so initialize
it accordingly.
Also add some bloat to better handle the case of an encoding error, even though
from code analysis that should not be possible here: there is enough buffer,
the MI is a TMSI encoded from a uint32_t...
The problem was introduced by Idfc8e576e10756aeaacf5569f6178068313eb7ea, before
which new_id_len was always 0 when no TMSI was present.
Related: CID#210894
Change-Id: I800c5dca3fdbdedf70a64d9fd5a1bdfd1397f431
ran_peer.c is not the proper place to parse messages, because it should be RAN
agnostic. All parsing and encoding belongs in ran_msg_a.c and ran_msg_iu.c.
Move the Osmux TLV parsing into the is_reset_msg op: add supports_osmux
out-parameter (and add a logging fi pointer). To be able to modify msg->l3h,
also make the msgb arg non-const.
In ranap_is_reset_msg(), always return non-support for Osmux.
In bssmap_is_reset_msg(), return 0 if no TLVs were parsed, 1/-1 if an Osmux TLV
was present/not present.
Update the osmux support flag directly where the ConnectionLess message is
received, so that there is only one place responsible for that.
Related: OS#4595
Change-Id: I1ad4a3f9356216dd4bf8c48fba29fd23438810a7
As soon as the subscriber is authenticated, update the VLR entry with the
MSC-A's full CGI, including the Cell Id received from the Complete Layer 3
Information.
Thus the Cell Id will be shown by vty 'show subscriber cache' and 'show
connection'.
This is tested by osmo-ttcn3-hacks Ie410714a96353f74a52a104c56fa0a08683e0004.
Related: OS#4627
Change-Id: Iee1781985fb25b21ce27526c6a3768bf70d4dc9a
For 'show subscriber cache', we print vsub->cgi. For 'show connection', it
makes more sense to print msc_a->via_cell.
This is tested by osmo-ttcn3-hacks Ie410714a96353f74a52a104c56fa0a08683e0004.
Related: OS#4627
Change-Id: I194271af2acb37b4f8cc2d106ab2fd2b0d443589
Add only a long option to not clutter the cmdline namespace.
To add a long option without a short letter is slightly complex: use the 'flag'
and 'val' mechanism as in 'man 3 getopt' to write an option index to
long_option.
Make sure that all VTY commands have been added before parsing cmdline options:
move various VTY init further above. For msc_vty_init(), the global msc_network
already needs to be allocated, so also move that.
Depends: Ic74bbdb6dc5ea05f03c791cc70184861e39cd492 (libosmocore)
Change-Id: I9146d5a44427509265420f52ae6540ad93eb14fc
When msc_ho_send_handover_request() generates the HANDOVER REQUEST
message, it does not populate the call_id struct member.
In ran_msg_a.c the struct member call_id is used, but the
call_id_present flag is not set, which also prevents the call_id being
added to the message
Change-Id: I6b1b55b3f5a3092d9557dc2512020c766a9ff744
Related: OS#4582
The BSSMAP message ASSIGNMENT REQUEST may contain an optional CALL
IDENTIFIER IE. While this IE is optional some BSC implementions may
require it.
Change-Id: I4288f47e4a6d61ec672f431723f6e72c7c6b0799
Related: OS#4582
This patch served for a manual testing counterpart for osmo-bsc to implement
MSC pooling.
This enables a basic MSC pooling setup, but for a production setup, osmo-msc
would still lack various features related to unloading subscribers to another
MSC as explained in 3GPP TS 23.236.
Change-Id: Iafe0878a0a2c8669080d757b34a398ea75fced36
Pau Espin
Neels Hofmeyr
Eric Wild
Vadim Yanitskiy
Harald Welte
Philipp Maier
Neels Hofmeyr
Keith Whyte