When a CM Service Req is being rejected, we should do so before changing the
state of the current conn.
Concerning multiple CM Service Requests: in fact we should store multiple
requests, but first fix the status quo of rejecting multiple requests.
Change-Id: I39209ee6662694aa054a2fc0d21eae76fb33e2f1
For each conn, set a default logging category, to distinguish categories for
BSSMAP and RANAP based conns.
LOG_RAN_CONN(): log with the conn's default category,
LOG_RAN_CONN_CAT(): log with a manually set category (mostly for keeping
previous DMM logging on the same category).
In some places, replace LOGP() using manual context with LOG_RAN_CONN(), and
remove the manual context info, now provided by the conn->fi->id.
This is loosely related to inter-BSC and inter-MSC handover: to speed up
refactoring, I want to avoid the need for manual logging context and just use
this LOG_RAN_CONN().
Change-Id: I0a7809840428b1e028df6eb683bc5ffcc8df474a
Replace locally defined enum ran_type with libosmocore's new enum
osmo_rat_type, and value_string ran_type_names with osmo_rat_type_names.
The string representations change, which has cosmetic effects on the test suite
expectations.
Depends: I659687aef7a4d67ca372a39fef31dee07aed7631 (libosmocore)
Change-Id: I2c78c265dc99df581e1b00e563d6912c7ffdb36b
In rare cases, a conn is already associated with a subscriber. So far, we
abort()ed on that, bringing the entire osmo-msc down. Rather log an error and
keep the service running.
In vlr.ops.subscr_assoc, add success/failure return value, and abort the
LU/PARQ on error.
I haven't figured out in detail yet why/how a subscriber would re-launch a
LU/PARQ on a conn that is already associated, so far it is merely clear that we
do not want to crash the MSC if that happens. A log is in OS#3742.
Related: OS#3742, OS#3743
Change-Id: Ic0d54644bc735700220b1ef3a4384c217d57d20f
Provide software version information to the GSUP peer. The version now
shows up in logs like this: Software_Version='osmo-msc-1.2.0.120-1263b'
Change-Id: I2eba32569349facdbb1fda201067c62cc804ccf4
Depends: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
Related: OS#3355
Add a 'ipa-name' VTY command which overrides the default IPA name
used by the MSC. This is a prerequisite for inter-MSC handover.
Related: OS#3355
Change-Id: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
It is a message that is initially permitted, but it is in fact not handled in
the L3 code but already before, upon receiving
BSS_MAP_MSG_CIPHER_MODE_COMPLETE.
Change-Id: I0079f07271ca76bd457d0e700f3a736eb9066b47
Along goes GSM_KEYSEQ_INVAL as VLR_*.
It's where it logically belongs, and is almost the only reason why vlr.h
includes gsm_data.h. The remaining reason, GSM_EXTENSION_LENGTH, will be moved
by upcoming patch.
Change-Id: I122feae7ee3cbc59e941daef35a954bce29fec76
For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
Following previous rename of gsm_subscriber_connection:
Some functions and #defines are still called like "msc_conn" or just "msc_",
while they are clearly about a RAN conn.
To avoid confusion with the future separate concepts of MSC roles and a RAN
connection, rename all those to match the common "ran_conn" prefix.
Change-Id: Ia17a0a35f11911e00e19cafb5d7828d729a69640
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
On UTRAN, Security Mode is used instead of Ciphering Command, which does not
feature an A5 algorithm id.
Change-Id: Idc7ca9da1aa13ae16f5db2cb1024676cbc770820
The gsm_subscriber_connection->encr is never used. Use it.
When sending the Ciphering Mode Command, populate the encryption key.
When receivint the Ciphering Mode Complete, populate the chosen alg_id.
Out of paranoia, store the enc key only if the size is large enough.
Hence the vty_dump_one_conn() now reports the actually chosen A5 algorithm ID
used.
For 3G connections, though, this will still remain 0 in the VTY, since there is
no explicit A5 algorithm negotiated on UTRAN. (Security Mode Command and
Security Mode Complete instead of the GERAN Ciphering.)
(Note, 'struct gsm_encr encr' will be renamed to 'struct geran_encr geran_encr'
in Idc7ca9da1aa13ae16f5db2cb1024676cbc770820)
Change-Id: Ice2c470c360612249f97301944c6fdf9443c7dce
This recent patch moves Classmark storage to the VLR subscriber, and introduced
a segfault when a Classmark Update is received during IMSI detach:
commit 986fe7ed18
change-id I27081bf6e9e017923b2d02607f7ea06beddad82a
Mon Sep 17 01:12:13 2018 +0200
"store classmark in vlr_subscr, not conn"
It assumed that we would never accept any Classmark Update messages unless we
also have a valid subscriber for it. Well, that is proven wrong by the
ttcn3-msc-test TC_imsi_detach_by_imsi(), which brings osmo-msc to its knees.
Fix: in case of no valid vlr_subscr being present, store Classmark in the conn
temporarily, and copy any received Classmark to VLR subscriber as soon as it
gets associated with the conn (if at all).
Change-Id: Ib2a2ae6bf86e8f29fc6751a8b5cdb7187cd70290
When the VLR requests a Ciphering Mode with vlr_ops.set_ciph_mode(), and if we
need a ciph algo flag from a Classmark information that is not yet known
(usually CM 2 during LU), send a BSSMAP Classmark Request to get it.
To manage the intermission of the Classmark Request, add
- msc_classmark_request_then_cipher_mode_cmd(),
- state SUBSCR_CONN_S_WAIT_CLASSMARK_UPDATE,
- event SUBSCR_CONN_E_CLASSMARK_UPDATE.
From state AUTH_CIPH, switch to state WAIT_CLASSMARK_UPDATE. Once the BSSMAP
Classmark Response, is received, switch back to SUBSCR_CONN_S_AUTH_CIPH and
re-initiate Ciphering Mode.
To be able to re-enter the Ciphering Mode algo decision, factor it out into
msc_geran_set_cipher_mode().
Rationale:
In the following commit, essentially we stopped supporting A5/3 ciphering:
commit 71330720b6
"MSC: Intersect configured A5 algorithms with MS-supported ones"
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
A5/3 was no longer supported because from that commit on, we strictly checked
the MS-supported ciphers, but we did not have Classmark 2 available during
Location Updating.
This patch changes that: when Classmark 2 is missing, actively request it by a
BSSMAP Classmark Request; continue Ciphering only after the Response. Always
request missing Classmark, even if a lesser cipher were configured available.
If the Classmark Update response fails to come in, cause an attach failure.
Instead, we could attempt to use a lesser cipher that is also enabled. That is
left as a future feature, should that become relevant. I think it's unlikely.
Technically, we could now end up requesting a Classmark Updating both during LU
(vlr_lu_fsm) and CM Service/Paging Response (proc_arq_fsm), but in practice the
only time we lack a Classmark is: during Location Updating with A5/3 enabled.
A5/1 support is indicated in CM1 which is always available, and A5/3 support is
indicated in CM2, which is always available during CM Service Request as well
as Paging Response. So this patch has practical relevance only for Location
Updating. For networks that permit only A5/3, this patch fixes Location
Updating. For networks that support A5/3 and A5/1, so far we always used A5/1
during LU, and after this patch we request CM2 and likely use A5/3 instead.
In msc_vlr_test_gsm_ciph, verify that requesting Classmark 2 for A5/3 works
during LU. Also verify that the lack of a Classmark Response results in attach
failure.
In msc_vlr_test_gsm_ciph, a hacky unit test fakes a situation where a CM2 is
missing during proc_arq_fsm and proves that that code path works, even though
the practical relevance is currently zero. It would only become interesting if
ciphering algorithms A5/4 and higher became relevant, because support of those
would be indicated in Classmark 3, which would always require a Classmark
Request.
Related: OS#3043
Depends: I4a2e1d3923e33912579c4180aa1ff8e8f5abb7e7 (libosmocore)
Change-Id: I73c7cb6a86624695bd9c0f59abb72e2fdc655131
Store all Classmark information in the VLR.
So, we now always know the Classmark 1 (mandatory IE for LU). This is visible
in the msc_vlr_tests -- they no longer indicate "assuming A5/1 is supported"
because classmark 1 is missing, because we now know the Classmark 1.
Rationale:
During Location Updating, we receive Classmark 1; during CM Service Request and
Paging Response, we receive Classmark 2. So far we stored these only for the
duration of the conn, so as soon as a LU is complete, we would forget CM1.
In other words, for anything else than a LU Request, we had no Classmark 1
available at all.
During Ciphering Mode Command, we rely on Classmark 1 to determine whether A5/1
is supported. That is moot if we don't even have a Classmark 1 for any CM
Service Request or Paging Response initiated connections.
The only reason that A5/1 worked is that we assume A5/1 to work if Classmark 1
is missing. To add to the confusion, if a phone indicated that it did *not*
support A5/1 in the Classmark 1, according to spec we're supposed to not
service it at all. A code comment however says that we instead want to heed the
flag -- which so far was only present in a Location Updating initiated
connection. Now we can make this decision without assuming things.
This got my attention while hacking on sending a BSSMAP Classmark Request from
the MSC if it finds missing Classmark information, and was surprised to see it
it lacking CM1 to decide about A5/1.
Change-Id: I27081bf6e9e017923b2d02607f7ea06beddad82a
In order to be able to support external SS/USSD gateway, we should
not terminate the GSM 04.80 messages at OsmoMSC. Instead, we need
to follow the GSM TS 09.11 specification, and forward all messages
unhandled by OsmoMSC to OsmoHLR over GSUP protocol.
This change implements forwarding of MO SS/USSD messages. The
forwarding assumes transcoding between GSM 04.80 messages and
GSUP messages. The payload of Facility IE is carried 'as is'.
As a side-effect, this will disable the osmo-msc internal handler
implementing the "*#100#" for obtaining the subscribers own phone
number. In order to re-gain this functionality, you will need a
modern osmo-hlr (Change-Id I1d09fab810a6bb9ab02904de72dbc9e8a414f9f9)
and the following line in your osmo-hlr.cfg:
hlr
ussd route prefix *#100# internal own-msisdn
TTCN-3 test case: I01de73aced6057328a121577a5a83bc2615fb2d4
Change-Id: Ide5f7e350b537db80cd8326fc59c8bf2e01cb68c
Some internal sub-systems, such as SS/USSD or SMS implementation,
may also need to use GSUP connection with HLR. Previously, it was
only available within the libvlr code, and nowhere else.
Let's introduce the generic GSUP message router, which will
receive messages unhandled by VLR itself, and route them to
a handler depending on the message type.
Change-Id: Ib8146ce5788c8f249dcaa39d61bd0388574bf892
The CC sub-layer is fairly self-contained, so let's move it to
a separate C source file. The old gsm_04_08.c file now only
contains the 04.07 / DTAP core and MM sub-layer handling.
I did this initially as an experiment to see how self-contained
our CC implementation really is. Given this rather straight-forward
patch builds fine, CC really is self-contained (yay!).
Change-Id: Idb8dd7a8d9d8b4a28c492f12da3cc3305b695cca
This function could be also used by other parts of code, e.g.
by gsm_04_11.c or by gsm_09_11.c, during initialization of
a new transaction. No need to hide it.
Change-Id: I9a9d17fca4901163dae10d76455aa4cf54497156
During a long time, we had both file and symbol names, actually
related to Supplementary Services, with the 'ussd' abbreviation.
This is not absolutely wrong, but isn't correct at the same time.
USSD is a kind of Supplementary Services, this is only a part
of them. There are also 'structured' Supplementary Services,
which can be call related or call independent.
The "Signalling interworking for supplementary services" is
defined by GSM TS 09.11, and this is exactly what MSC should
implement. Let's use the specification number for naming, as
we do e.g. in the GSM 04.11 (SMS) implementation.
Change-Id: Ic1eaceddb58132318e4e941be542da34b8ebefe1
Catched by osmo-gsm-tester running test voice:octphy.
Fixes following AddressSanitizer report:
==18864==ERROR: AddressSanitizer: heap-use-after-free on address 0x61a000016f18 at pc 0x55f1b29eee5c bp 0x7ffdaa2ac000 sp 0x7ffdaa2abff8
WRITE of size 8 at 0x61a000016f18 thread T0
#0 0x55f1b29eee5b in setup_trig_pag_evt osmo-msc/src/libmsc/gsm_04_08.c:1490
#1 0x55f1b2a086c1 in subscr_paging_dispatch osmo-msc/src/libmsc/gsm_subscriber.c:101
#2 0x7fb88e07c1c9 in osmo_timers_update libosmocore/src/timer.c:257
#3 0x7fb88e07f1b1 in osmo_select_main libosmocore/src/select.c:253
#4 0x55f1b29b600b in main osmo-msc/msc_main.c:694
#5 0x7fb88bebe2e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#6 0x55f1b29b69f9 in _start (osmo-msc/bin/osmo-msc+0xf09f9)
Related: OS#3198
Change-Id: Ie7fdca4d48e247c77a53e81aec2b6bacd8fef678
Take the chance to pass a var of type enum instead, so the compiler
warns us if a new enum value is added. For instance, if we remove
GSM_PAGING_EXPIRED from the switch statement:
src/libmsc/gsm_04_08.c:1463:2: warning: enumeration value ‘GSM_PAGING_EXPIRED’ not handled in switch [-Wswitch]
switch (paging_event) {
^~~~~~
Change-Id: I65d871704b9636c594dc982200fbe7f7ce6784f5
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
So far we hit a running T308 during CC release when caused by a BSSMAP Clear
Request, and we loudly log that as error.
However, now I understand that T308 is a direct cause of the dispatch of a REL
IND towards MNCC, which is used to indicate teardown to MNCC. So during
_gsm48_cc_trans_free(), we first clear all timers, then invoke
mncc_release_ind() which starts another timer (useful for graceful CC Release,
but in this code path the intention is immediate release). Simply immediately
cancel the timer again and release the conn.
A separate question is whether a BSSMAP Clear Request should be less aggressive
in releasing the connections; i.e. instead of calling trans_free() all around,
to rather ask each transaction to "please stop soon", somehow.
Related: OS#3062
Change-Id: I231fdb574a086a206321148474cbdc7ca9cf39f0
The DLCI field of the DTAP header indicates the SAPI as well as the
data link (main DCCH or SACCH). We must make sure to use the correct
DLCI when sending DTAP to the BSC.
We achieve this by
* storing the DLCI in the msgb->cb while parsing the DTAP header
* storing the received DLCI (from msgb->cb) in the transaction for
mobile-originated transactions
* using the trans->dlci to sent msgb->cb when transmitting L3
* filling the DTAP DLCI value from msgb->cb when transmitting DTAP
For MSC-originated transactions, we choose a DLCI value corresponding
to the service (SAPI=0 for CC, SAPI=3 for SMS) and store that in
trans->dlci.
Closes: OS#3150
Change-Id: If511b20f52575054cab1346d99a8cb68d827fdbf
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
'subscr_conn_from' could mean anything: from what, RAN type? BSS identifier? MM
action? Clearly name it as the Complete Layer 3 kind it represents.
Related: OS#3122
Change-Id: I6263a80e6db01c2ca48df6c58b05e2fd19347057
Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
Move gsm48_* functions from common_cs.c to libmsc/gsm_04_08.c.
Drop sms_next_rp_msg_ref(), it is just a bunch of bloat around "next_rp_ref++".
Apply the "++" instead, in gsm_04_11.c.
libcommon-cs is now empty, to be removed in subsequent commit.
Change-Id: Ibc410803ce8e273b626124ab9fc934f04df3ae50
classmark_is_r99() is only used in gsm_04_08.c, move there as static.
rrlp_mode_* is only used in msc_vty.c, move there as static.
Move ran_type_names[] to msc_ifaces.c.
Change-Id: I5381c72af6841829fbc65940fd7d6f4d5cf583df
gsm_04_08.c seems to contain some lines of old debug code that
is commented out. Presumably the commented lines are a leftover
from a debug session.
- remove those commented code lines
Change-Id: Ifb84e4b0696fef1326c3f9ebc8427581057db44f
Since commit 2483f1b050 the function
gsm48_tx_mm_info() was not called anymore. No MM info messages were
transmitted to phones even if MM info messages were enabled via VTY.
With this commit, we call gsm48_tx_mm_info() after successfully
processing an IMSI ATTACH location update.
Change-Id: Ice5963d84253eb8c803cd2dfa8b25a4db5382827
Related: OS#2850
Do not interpret the SRES/RES length returned in the auth response as the R99
capability bit, instead determine it from the actual Classmark information
associated with the conn.
This fixes the is_r99 flag passed in to vlr_subscr_rx_auth_resp(), which ends
up in the struct vlr_auth_resp_par dispatched to the auth_fi and influences the
authentication acceptance.
Though the effect of a wrongly-set-to-false R99 flag is not harmful in this
code path, let's not get this confused.
Change-Id: Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
Instead of just closing down the conn hard, actually feed invalid auth response
data to vlr_subscr_rc_auth_resp() in order to trigger all the actions we want
to see with a failed authentication:
- a GSUP signal that the auth failed,
- a LU reject.
Verify this in new test_wrong_sres_length() in msc_vlr_test_gsm_authen.c.
Note that in gsm48_rx_mm_auth_resp(), the is_r99 flag is falsely derived from
the RES length, which upcoming commit Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
will fix.
Change-Id: I4179a290069ac61d0662de4ec7ca3edb76988899
The vlr_subscr_get() can return NULL if its argument is NULL
(which isn't checked for) so before dereferencing it's result
we should check for it.
Change-Id: I13632908d0b67323202effa9dd6f29732a12cc91
Actually call msc_vlr_set_ciph_mode() and wrap away a_iface_tx_cipher_mode()
and ranap_iu_tx_sec_mode_cmd(). Hence we'll see decisions and errors in
msc_vlr_set_ciph_mode() as well.
Change-Id: Id23bc245d4b5707edcd27c44db272fbb211bf9bd
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore)
Change-Id: I82f0016d9512ee8722a3489a3cb4b6c704a271fc
When we receive bearer capabilities from MNCC and encode thme into
a CC message, we have to also update our "cache" inside 'struct
gsm_trans'. Only that way, the BSSMAP ASSIGNMENT code is aware of
the actual current/present bearer capabilities such as permitted speech
codecs.
This will in practise only work if the related CC/MNCC message with
berer_cap IE will happen before the MSC performs the BSSMAP ASSIGNMENT
procedure. Our logic still needs to change in a way that the CC/MNCC
code in gsm_04_08.c detects if trans->bearer_cap != new bearer_cap, and
in that case triggers a new follow-up BSSMAP ASSIGNMENT.
Change-Id: I6838dc0c8c4c2c6bba385da548c92f3fc91060c1
Closes: OS#2854
When we receive a MNCC_SETUP_REQ primitive from the external MNCC
handler, we must not only encode it into the TS 04.08 CC SETUP, but
also keep it around in the "trans" structure representing this voice
call, as it is needed e.g. at BSSMAP ASSIGNMENT time.
Change-Id: Ib6919d148ff6687112e8166dbde947be19e70a76
Related: OS#2322
Closes: OS#2929
As in GSM/3GPP networks emergency calls carry no explicit destination
number/address, add a VTY commadn to patch in some destination handler
in the EMERGENCY SETUP before delivering to [internal or external] MNCC.
Change-Id: I7c9f43ba312fadda2b9a9483b3cf50e4abca9599
Neels Hofmeyr
Harald Welte
Pau Espin
Philipp Maier