Adds (no) alert-notifications as a per-esme vty command,
in order to allow some ESMEs to be excluded from alerts.
The default is still to send alert notifications to all esme,
so no changes are required to the config file to maintain
identical operation after this patch.
Change-Id: I57f4d268ca6fe6a233f2caaffce62e4aade01274
Move code which allocates transaction for SMS and initializes
corresponding FSM into separate function (shared by MT and MO code
paths) to avoid code duplication and simplify further modifications.
Change-Id: I3563e11bebb58e656592df2ff7db96f41deaf735
The likely reason why it was disabled is due to
paging_cb_mmsms_est_req() logging pointers which results in unstable log
output. Fixing this allows us to track SMS-related regressions properly.
Change-Id: I44ae817d9edb73d182ff33ff5a2fd942e224e344
When check-imei-req is enabled in the VTY config, do not accept IMEIs
sent by the ME directly anymore. Send the IMEI to the EIR/HLR and wait
for its ACK or NACK.
OsmoHLR also accepts all IMEIs at this point, but this allows to
optionally store the IMEI in the HLR DB.
Depends: Ib240474b0c3c603ba840cf26babb38a44dfc9364 (osmo-hlr)
Related: OS#3733
Change-Id: Ife868ed71c36cdd02638072abebf61fc949080a7
The pointers conn, conn->vsub and conn->vsub->last_tuple are checked,
but before the check those pointers are already dereferenced during
assignment. This defeats the purpose of the check. Lets dereference
those pointers after the check.
Fixes: CID#190404
Change-Id: Ice4992606f3799eac13154ec0b9f53e46d2e178e
Instead of
MGW(MGW_99)
use a name of
msc-mgcp(MSISDN:2331_GERAN_A:00000017_trans99)
1. The FSM is communication towards an MGW, not the MGW itself. When reading
combined logging (gsmtap_log), it is confusing to read 'MGW' in a log coming
from the MSC. The API is also called msc_mgcp_*.
2. Calling the FSM instance 'MGW_' again doesn't make sense.
3. Indicate 'trans' before the trans_id (trans_id was already shown, but not
indicated what it was).
4. Also indicate the actual subscriber's identification.
5. Also indicate the RAN connection and conn_id.
This comes up while trying to understand a call coming in on an already
established call: parsing the log with a human brain is near torture without
this info, taking extremely long to get grips on.
Change-Id: Ie5fc1ffb7eba0209fee4666a075655cd24d27473
ran_conn_get_conn_id(): instead of a talloc allocated string, return a static
buffer in ran_conn_get_conn_id(). So far this function had no callers.
Refactor ran_conn_update_id() API: during early L3-Complete, when no subscriber
is associated yet, update the FSM Id by the MI type seen in the L3 Complete
message: ran_conn_update_id_from_mi(). Later on set the vsub and re-update.
Call vlr.ops->subscr_update when the TMSI is updated, so that log context
includes the TMSI from then on.
Enrich context for vlr_subscr_name and ran_conn fi name.
Include all available information in vlr_subscr_name(); instead of either IMSI
or MSISDN or TMSI, print all of them when present. Instead of a short log,
rather have more valuable context.
A context info would now look like:
Process_Access_Request_VLR(IMSI-901700000014706:MSISDN-2023:TMSI-0x08BDE4EC:GERAN-A-3:PAGING_RESP)
It does get quite long, but ensures easy correlation of any BSSAP / IuCS
messages with log output, especially if multiple subscribers are busy at the
same time.
Print TMSI and TMSInew in uppercase hexadecimal, which is the typical
representation in the telecom world.
When showing the RAN conn id
GERAN_A-00000017
becomes
GERAN-A-23
- We usually write the conn_id in decimal.
- Leading zeros are clutter and might suggest hexadecimal format.
- 'GERAN-A' and 'UTRAN-Iu' are the strings defined by osmo_rat_type_name().
Depends: I7798c3ef983c2e333b2b9cbffef6f366f370bd81 (libosmocore)
Depends: Ica25919758ef6cba8348da199b0ae7e0ba628798 (libosmocore)
Change-Id: I66a68ce2eb8957a35855a3743d91a86299900834
When a CM Service Req is being rejected, we should do so before changing the
state of the current conn.
Concerning multiple CM Service Requests: in fact we should store multiple
requests, but first fix the status quo of rejecting multiple requests.
Change-Id: I39209ee6662694aa054a2fc0d21eae76fb33e2f1
For each conn, set a default logging category, to distinguish categories for
BSSMAP and RANAP based conns.
LOG_RAN_CONN(): log with the conn's default category,
LOG_RAN_CONN_CAT(): log with a manually set category (mostly for keeping
previous DMM logging on the same category).
In some places, replace LOGP() using manual context with LOG_RAN_CONN(), and
remove the manual context info, now provided by the conn->fi->id.
This is loosely related to inter-BSC and inter-MSC handover: to speed up
refactoring, I want to avoid the need for manual logging context and just use
this LOG_RAN_CONN().
Change-Id: I0a7809840428b1e028df6eb683bc5ffcc8df474a
In gsm0911_rcv_nc_ss() we sometimes use pdisc parsed from msgb and
sometimes constant. This function is only called when protocol
discriminator is GSM48_PDISC_NC_SS so there's no point in parsing it
again from msgb.
Let's make it consistent and always use constant.
Change-Id: Iae40bf9906fe676ff817c709120015fca4c9e042
Make the vsub argument of both vlr_subscr_msisdn_or_name()
and vlr_subscr_name() a const.
The LOGVSUBP() macro uses vlr_subscr_name() and will not generate a
warning anymore when used with a const vsub.
Change-Id: If609269191f4df6186d823a2eee14012846328e2
Remove vlr_subscr_name() and vlr_subscr_alloc() declarations from
vlr_core.h, as they are already defined in osmocom/msc/vlr.h and vlr.h
gets included on top of vlr_core.h.
Change-Id: I5c029be490577b513395dc3f2c2698f365157e73
Remove "0 =", "1 =" in-front of the boolean descriptions of
auth-tuple-reuse-on-error. The online VTY doc and the pdf manual
prepend the value automatically.
Change-Id: Ifd14c2fb3f58701eaf66570d729a660233fb83ed
Rationale: reading pcaps becomes so much easier when each of osmo-bsc and
osmo-msc address their MGW with differing domain names. Otherwise, both will
have a '0@mgw' endpoint and it gets really confusing.
After this, with according configuration, there can be a '0@bsc' and a '0@msc'
endpoint.
osmo-mgw-for-msc.cfg:
mgcp
domain msc
osmo-msc.cfg:
msc
mgw endpoint-domain msc
Depends: Ia662016f29dd8727d9c4626d726729641e21e1f8 (osmo-mgw)
Change-Id: I87ac11847d1a6d165ee9a2b5d8a4978e7ac73433
Replace locally defined enum ran_type with libosmocore's new enum
osmo_rat_type, and value_string ran_type_names with osmo_rat_type_names.
The string representations change, which has cosmetic effects on the test suite
expectations.
Depends: I659687aef7a4d67ca372a39fef31dee07aed7631 (libosmocore)
Change-Id: I2c78c265dc99df581e1b00e563d6912c7ffdb36b
during code review, I completely overlooked this:
We've added the 'ipa-name', which identifies the MSC on the GSUP link to the
HLR, under the 'msc' section, while all other GSUP/HLR related config is under
the 'hlr' section.
Before we roll that out in a release, move it over to 'hlr'.
Related: OS#3355
Change-Id: I1a572865aa90c5fa43c6f57282a6e2b06776e425
Probably fixes this segfault:
at ../../../../src/osmo-msc/src/libvlr/vlr_lu_fsm.c:957
file=file@entry=0x5611d8f10c28 "../../../../src/osmo-msc/src/libvlr/vlr_lu_fsm.c", line=line@entry=1467)
at ../../../src/libosmocore/src/fsm.c:580
parent_event_failure=parent_event_failure@entry=6, parent_event_data=parent_event_data@entry=0x0, vlr=0x5611d98862b0,
msc_conn_ref=msc_conn_ref@entry=0x5611d9aa8150, type=VLR_LU_TYPE_REGULAR, tmsi=4294967295, imsi=0x7ffd756c1cf0 "262423403004874",
old_lai=0x7ffd756c1ce0, new_lai=0x7ffd756c1ce8, authentication_required=true, ciphering_required=true, is_r99=false, is_utran=false,
assign_tmsi=true) at ../../../../src/osmo-msc/src/libvlr/vlr_lu_fsm.c:1467
at ../../../../src/osmo-msc/src/libmsc/gsm_04_08.c:443
The segfault is indirectly caused by 1fbf45c291,
'enrich context for vlr_subscr_name and ran_conn fi name', which sets auth_fsm
context, on a non-NULL auth_fsm that has been deallocated.
Change-Id: I3c528eed295be2ee673ea295804372f388a0dccd
If Assignment fails in the BSC, trigger an EV_TEARDOWN_ERROR in the mgcp_ctx
FSM instance, so that the call gets torn down immediately. Before this, the
non-call would idle around without anything happening.
Related: OS#3236
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore)
Change-Id: I358cfbaf0f44f25148e8b9bafcb9257b1952b35a
If a call is already busy and another call is coming in, do not try to
immediately assign an lchan (before this patch, it fails because there already
is an mgcp_ctx for the conn). Leave the second CC transaction waiting.
When a call is hung up, as soon as the old mgcp_ctx is discarded, look for
other CC transactions that are waiting. If there is one, trigger assignment, so
a new mgcp_ctx is set up for the new call.
This fixes the following scenario:
- from A, call B.
- from C, call B; B rings during ongoing call.
- in B, pick up the call, choose to drop the old call.
After this patch, and with osmo-bsc patch with change-id
I0c00ec2c120e5008281755adcd4944a3ce4d8355
we are now able to talk to the new caller.
I currently haven't tested yet what happens if there is *three* peers trying to
talk to the same number, running out of lab phones (not really, just not
bothering now). Possibly we should be taking over the particular call indicated
by the CC TI; instead, the current patch version takes on whichever waiting
call it finds first. This is fine if *one* additional call comes in on an
ongoing call, and this is already a huge improvement to what we had before.
Related: OS#3735
Change-Id: I0ba216b737909e92080a722db26e3577726c63cb
The flag is set to true when an assignment has been started, and it is only
relevant for a CC transaction. So fix naming and place in cc struct.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Change-Id: I8dacf46141ba0b664e85b0867ade330c97d8495f
Various places in the code check a flag whether assignment was started and
launch it. To fix incoming-call-during-ongoing-call, I will tweak that logic.
To be able to do that only in one place, remove code dup.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore: LOGPFSMSL)
Change-Id: I11c0b7dc3f1a747028629b48e522bb3b864884ba
In rare cases, a conn is already associated with a subscriber. So far, we
abort()ed on that, bringing the entire osmo-msc down. Rather log an error and
keep the service running.
In vlr.ops.subscr_assoc, add success/failure return value, and abort the
LU/PARQ on error.
I haven't figured out in detail yet why/how a subscriber would re-launch a
LU/PARQ on a conn that is already associated, so far it is merely clear that we
do not want to crash the MSC if that happens. A log is in OS#3742.
Related: OS#3742, OS#3743
Change-Id: Ic0d54644bc735700220b1ef3a4384c217d57d20f
Do not break the currently ongoing call when rejecting a second incoming
caller.
There may be multiple (up to seven) simultaneous CC transactions, and there is
one mgcp_ctx for the currently active RTP stream.
Release the MGCP context only when the active CC transaction is releasing.
Before this patch, any CC transaction release would destroy the single MGCP
context, possibly breaking the currently ongoing call (another CC trans).
This also fixes a possible use-after-free if there were pending MGCP message
responses for the MGCP context; they are canceled properly for a released
transaction, but since one transaction would free the other transaction's MGCP
state, the clean up did not take place and possibly caused an mgcp client
response handling to access a freed mgcp_ctx.
Related: OS#3735
Change-Id: I1f8746e7babfcd3028a4d2c0ba260c608c686c76
Use local variables instead of writing trans->conn-> all the time.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Change-Id: I99717b3b72a9d7cbc95455ea25b2018ec1755308
As a rudiment of OsmoNiTB, OsmoMSC is still involved in SMS
processing, storage (in SQLite DB), and routing (via SMPP).
In real networks this is done by the external entity called
SMSC (SMS Centre), while the MSC is doing re-encapsulation
of GSM 04.11 SM-TL (Transport Layer) payload (i.e. TPDU)
between SM-RL (Relay Layer) and MAP.
Since OsmoMSC itself is not a 'Network in The Box' anymore, it
makes sense to replicate the 'traditional' behaviour of MSC.
The problem is that this behaviour cannot co-exist with the
current implementation, so the key idea is to rip out the
local SMS storage and routing from OsmoMSC, and (re)implement
it in a separate process (OsmoSMSC?).
As a temporary solution, this change introduces a 'kill-switch'
VTY option that enables routing of SMS messages over GSUP
towards ESME (through VLR and HLR), but breaks the local
storage and routing. This is why it's disabled by default.
As soon as we move the SMS processing and storage away from
OsmoMSC, this behaviour would be enabled by default, and
the VTY option would be hidden and deprecated. At the moment,
this option basically does nothing, and will take an effect
in the follow-up changes.
Change-Id: Ie57685ed2ce1e4c978e775b68fdffe58de44882b
Related: OS#3587
We can check if we're parsing the config file by checking
whether vty->type equals VTY_FILE. This avoids the use of
an extra local variable to track the parsing state.
Change-Id: I85161575e025f7c389832427a434bd8e2d6ecc75
Fixes: 1051c42088
Related: OS#3355
When the VLR subscriber information is shown on the VTY it shows IMSI
and TMSI, but not IMEI and IMEISV. Since in some cases this information
might be helpful, lets display it as well.
Change-Id: Iedd75dbb9850388ec1fedb984ed0b8bf4c62e780
Always use LAC which is part of Cell Global ID otherwise we might end up
in a situation where separately stored LAC differs.
Both are described in 3GPP TS 23.008 $2.4 as temporary subscriber data
to be stored in VLR. Both are defined in 3GPP TS 23.003. The LAC is part
of LAI which is part of CGI so there should be no case when those values
differ for a given subscriber.
Change-Id: I993ebc3e14f25e83124b6d3f8461a4b18f971f8e
When a subscriber is displayed the RAN type is not included in the
overview. Meanwhile the MSC supports multiple different ran types it
becomes important to see in which RAN the subscriber is currently
active.
Change-Id: I000cafd5e41b9951d51b6bd6672ee68a224b8212
Related: OS#3615
When a VLR subscriber is displayed on the VTY we get a lot of meta
information, but there are also some flags to handle the internal
subscriber status e.g. conf_by_radio_contact_ind. Lets display those
flags as well as this information can be very helpful when debugging
problems in the VLR
Change-Id: I59a9145a4daad50d68de3fd5c3291f027256917f
Do not show the VTY command's own use count during 'show subscriber <ID>'.
When using 'show subscriber msisdn 2023', I was surprised to see a use count of
2 and suspected a use count leak. With 'show subscriber cache' however, the use
count is 1.
So I realized it is the vty command's own use count that makes it two, besides
the lu_complete=true one.
Change-Id: Id02b57b7ed299b010b9f8b9e809548eb1e6aa699
There is no state transition from INIT to WAIT_IMEI, only to WAIT_SUB_PRES.
If there were code to skip WAIT_SUB_PRES, the allowed state transitions would
have to be the same as for WAIT_SUB_PRES, i.e. also WAIT_IMEI_TMSI and
WAIT_TMSI_CNF. For now just opt for the status quo.
Change-Id: I18ef9e8c96b52401d98f49dc410f13681231b533
sub_pres_vlr_fsm_start() only ever has an effect if ms_not_reachable_flag ==
true. But there simply is no code that sets this flag. So
sub_pres_vlr_fsm_start() is currently dead code.
Also, examining the FSM, if it should ever be set to true, this would halt the
LU/CM Service/Paging response, since the FSM would merely change its state
without dispatching asynchronous messages. No chance of finishing.
Short of dropping the code entirely, first just mark it. The point being that
this models some FSM definition from 3GPP specs, and we have a couple other
"if (0)" branches in the VLR...
Change-Id: I198d442e9ed288f37c7d4e5ec87b82dc53114e99
They were on DEBUG during early development stages, and it's high time that I
drop those back to NOTICE.
Change-Id: I3b46e9107a7a1d81a44d2a2eb855c10960a1ab6b
The 'ipa-name' option can now only be set via the configuration file
because changing the IPA name at run-time conflicts with active
GSUP connections and routes configured in the HLR. The osmo-msc
program must be restarted if its IPA name needs to change.
Change-Id: I6cff91793e646e0396e8f1bc87d0f52709e5f12a
Related: OS#3355
Two reasons:
- the caller of msc_mgcp_ass_complete() from Iu, iucs_rx_rab_assign(), failed
to be adjusted, breaking IuCS, as an --enable-iu --enable-werror build shows.
Unfortunately our gerrit verification doesn't --enable-werror for osmo-msc.
- the condition of requiring ST_MDCX_RAN is faulty, breaking GSM CS.
This reverts commit 212c0c9bda.
Change-Id: I8348675c2f7c8856ea1682d05ee54160d4cfeb96
Provide software version information to the GSUP peer. The version now
shows up in logs like this: Software_Version='osmo-msc-1.2.0.120-1263b'
Change-Id: I2eba32569349facdbb1fda201067c62cc804ccf4
Depends: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
Related: OS#3355
Add a 'ipa-name' VTY command which overrides the default IPA name
used by the MSC. This is a prerequisite for inter-MSC handover.
Related: OS#3355
Change-Id: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
sub_pres_vlr_fsm_start() starts the FSM, invokes the START event, and then this
FSM invariably always directly terminates when vsub->ms_not_reachable_flag ==
false.
So if it is false, there is not much use in instantiating a whole FSM instance
that just terminates again, we might as well directly issue the
parent-term-event and save some logging space.
The same condition is already in place in the vlr_proc_acc_fsm.c in
_proc_arq_vlr_node2_post_vlr() for CM Service Request and Paging Response. Now
also skip this for LU.
Change-Id: Id2303a795dfd381f76e94ff8ff2f495926ca8ba0
When a subscriber is cancelled, fake an IMSI detach to
ensure that the subscriber gets removed from the VLR.
I am not entirely sure if this change is correct but
it does make TTCN3 test MSC_Tests.TC_gsup_cancel pass.
Change-Id: I5918106e4a94ba2e6c61bcd7b90d3bf0565513cc
Related: OS#2886
It is a message that is initially permitted, but it is in fact not handled in
the L3 code but already before, upon receiving
BSS_MAP_MSG_CIPHER_MODE_COMPLETE.
Change-Id: I0079f07271ca76bd457d0e700f3a736eb9066b47
BSSMAP Assignment Complete: sort MGCP handling upon Assignment Complete to the
proper locations. a_iface_bssap.c is not the right place to invoke the MGCP
related procedures.
- in a_iface_bssap.c only decode the IEs.
- call ran_conn_assign_compl() and pass decoded values.
- drop msc_assign_compl(), it was dead code; instead:
- add ran_conn_assign_compl()
- pass on all MGCP related info to msc_mgcp_ass_complete()
- move all MGCP ctx related handling from a_iface_bssap.c to msc_mgcp.c.
I'm dropping some comments to save some time, because if I adjust them IMHO
they would still anyway restate the obvious.
ran_conn_assign_compl() is now quite a thin shim, but it makes sense to have
it:
- This is the place that should tear down the ran_conn in case assignment
failed, left for a future patch.
- In the light of upcoming inter-MSC handover, ran_conn_assign_compl() will be
the place where the Assignment Complete message might be relayed to a remote
MSC.
Change-Id: I8137215c443239bddf3e69b5715839a365b73b6c
BSSMAP Assignment Complete:
Do not invoke ran_conn_rx_sec_mode_compl(), that's just weird.
Instead this should call msc_assign_compl(), which is currently dead code and
does nothing ... and there are some more strings attached, being resolved in a
subsequent patch.
Change-Id: I448fdb783364628005437b3d866d1a076a9767d7
So far the only way to use external MNCC is to pass the -M cmdline arg:
osmo-msc -M /path/to/socket
However, the osmo-msc.service file for systemd is installed by 'make install',
and hence it is quite impractical to depend on such a config item to be
required in the service file:
- It defies any scheme an operator may have in place to compose the
osmo-msc.cfg file -- this option doesn't go in the .cfg file but needs
separate action to add to the installed service file.
- After a make install or package upgrades / re-installations, this option will
be plain overwritten silently, or lead to the need for resolving file
conflicts.
The initial spark for this came from configuring the 35c3 GSM from cfg
templates.
Change-Id: I2ec59d5eba407f83295528b51b93678d446b9cee
I want to add 'mncc internal' and 'mncc external' commands, and IMHO makes most
sense to have a common 'mncc' keyword to start MNCC config commands with. To
put it in terms of VTY online help:
OsmoMSC(config-msc)# mncc ?
internal Use internal MNCC handler
external Use internal MNCC handler
guard-timeout Set global guard timeout
So far only the 'guard-timeout' exists, I want to add 'internal' and 'external'
in a subsequent commit.
Keep the old command 'mncc-guard-timeout' as deprecated alias. That means it
still works from old config files, but online documentation will omit it.
On 'write', write back the new format instead.
Rationale: see I2ec59d5eba407f83295528b51b93678d446b9cee
Change-Id: I52d69af48e1ddc87b3fb54bf66a01b1b8cbf5abe
First step towards allowing to configure the MNCC socket path by config file.
Rationale: see I2ec59d5eba407f83295528b51b93678d446b9cee
Change-Id: Ifc87c1cacaa809d04fc23e8ccd761bee4509c805
The function msc_paging_request() is only called from within
gsm_subscriber.c but never from outside. Lets make it static.
Change-Id: I2efc8eac01a4dd8733118067eecf566c13062106
gsm_subscriber.h contains some legacy cruft, part of which is that the VLR's
max MSISDN length should rather be defined in vlr.h. Same for GSM_NAME_LENGTH
-> VLR_NAME_LENGTH.
Adjust some sms_queue stuff that anyway includes vlr.h already.
Drop gsm_subscriber.h from vlr.h.
Add other (more concise) includes that thus become necessary, since the include
chain vlr.h->gsm_subscriber.h->gsm_data.h is no longer in place.
Change-Id: Iab5c507ec04fc2884187cf946f6ae2240e4a31f8
Along goes GSM_KEYSEQ_INVAL as VLR_*.
It's where it logically belongs, and is almost the only reason why vlr.h
includes gsm_data.h. The remaining reason, GSM_EXTENSION_LENGTH, will be moved
by upcoming patch.
Change-Id: I122feae7ee3cbc59e941daef35a954bce29fec76
For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
With the dawn of inter-BSC,MSC handover, adopting the MSC-A,-I,-T roles from
3GPP TS 49.008, the RAN connection shall soon be a neatly separated corner of
osmo-msc, so gravitate ran_conn decarations to files of matching name.
Also, the current chaos of API defined in files with mismatching/meaningless
names drives me crazy.
Change-Id: Ice31e6c43e46678538c65261f150c67e1d0845e5
Following previous rename of gsm_subscriber_connection:
Some functions and #defines are still called like "msc_conn" or just "msc_",
while they are clearly about a RAN conn.
To avoid confusion with the future separate concepts of MSC roles and a RAN
connection, rename all those to match the common "ran_conn" prefix.
Change-Id: Ia17a0a35f11911e00e19cafb5d7828d729a69640
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
msc_compl_l3() always returns MSC_CONN_ACCEPT, because the conn FSM handles (or
should handle) all reject cases. The accept/reject return value is a legacy
from libbsc internally passing a conn over to libmsc, in osmo-nitb.
Drop enum msc_compl_l3_rc.
Change msc_compl_l3_rc() to return void.
Change all callers to always act like for acceptance, as they always did anyway.
Drop some local variables now no longer needed.
Adjust the comment to msc_compl_l3().
Drop a bunch of #if-0'd code from msc_compl_l3().
Change-Id: I759d15f4e820d5fc16397ed7210ce92308e52a09
On UTRAN, Security Mode is used instead of Ciphering Command, which does not
feature an A5 algorithm id.
Change-Id: Idc7ca9da1aa13ae16f5db2cb1024676cbc770820
The gsm_subscriber_connection->encr is never used. Use it.
When sending the Ciphering Mode Command, populate the encryption key.
When receivint the Ciphering Mode Complete, populate the chosen alg_id.
Out of paranoia, store the enc key only if the size is large enough.
Hence the vty_dump_one_conn() now reports the actually chosen A5 algorithm ID
used.
For 3G connections, though, this will still remain 0 in the VTY, since there is
no explicit A5 algorithm negotiated on UTRAN. (Security Mode Command and
Security Mode Complete instead of the GERAN Ciphering.)
(Note, 'struct gsm_encr encr' will be renamed to 'struct geran_encr geran_encr'
in Idc7ca9da1aa13ae16f5db2cb1024676cbc770820)
Change-Id: Ice2c470c360612249f97301944c6fdf9443c7dce
In I4a07ece80d8dd40b23da6bb1ffc9d3d745b54092 I've introduced a
regression. According to GSM TS 04.11, section 2.3, SAPI 3 shall
be used for both MO/MT SMS transmissions. Due to a mistake,
caused by misunderstanding of the meaning of trans->dlci, SAPI 3
was not assigned to SM transactions if there is already an active
RAN connection with subscriber. Let's fix this.
Let's also drop this misleading comment:
/* FIXME: specify SACCH in case we already have active TCH */
because it's a task of the BSC/BTS to decide which lchan to use.
Change-Id: I08d0801a89d377441e95fb8e3dd27c8d587f89e9
Related: OS#3716
gsm_network contains an int handover.active which is always zero. Drop it.
There is real handover code coming up soon, one part of this is to avoid
confusion.
The internal MNCC code queried it to decide whether to MNCC_BRIDGE or proxy RTP
(MNCC_FRAME_RECV). Since RTP is being handled by osmo-mgw since forever, drop
that entire condition from mncc_builtin.
Change-Id: Ie16e718266882588b38297121364ca0b7fdfe948
According to GSM TS 04.11, the SMC (Short Message Control) state
machine is a part of CM-sublayer of L3, that is responsible for
connection management (establisment and releasing), and SM-RP
(Relay Protocol) message delivery.
For some reason, the connection establisment request from SMC
(GSM411_MMSMS_EST_REQ) was not handled properly - it was
always assumed that connection is already established.
This is why the code initiating a MT (Mobile Terminated) SMS
transfer had to establish a radio connection with subscriber
manually.
Let's benefit from having the SMC state machine, and offload
connection establishment to it. This change makes the local
implementation closer to GSM TS 04.11, and facilitates the
further integration of GSUP transport.
NOTE: the expected unit test output is changed, because now we
always allocate a transaction first, and then establish a
connection, not vice versa.
Change-Id: I4a07ece80d8dd40b23da6bb1ffc9d3d745b54092
According to GSM TS 04.11, section 8.2.3, the RP Message Reference
is a mandatory field for all messages on the SM-RL (SM Relay Layer),
that is used to link an RP-ACK or RP-ERROR message to the associated
(preceding) RP-DATA or RP-SMMA message transfer attempt.
This change extends the transaction state structure with SM-RP-MR,
and introduces a new function for matching transactions within a
given connection by this reference.
Change-Id: Ice47c37ecef4416e65ecee8931d946c915316791
It's much better to have both RP-DATA header parsing and validation
code in a single function. There is no need to pass all the header
fields (DA, OA, UI) to gsm411_rx_rp_ud() because they are not
used there.
Change-Id: Iaf295949148e2a613c5403d1f7a926fcd6849c15
Passing a message buffer containing the whole encoded message, and
a pointer to the RP header (struct gsm411_rp_hdr) is redundant.
Change-Id: I0eb5c7c485ab7d109966431bd875fa74e00936d7
| ../../../git/src/libmsc/msc_vty.c:1202:44: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
| vty_out(vty, "Location Update : %lu attach, %lu normal, %lu periodic%s",
| ^
Change-Id: Iae1c0b20a519ce71a21f72cea3c63694ef10adb4
When using smpp-first, after the ESME accepts our STATUS REPORT,
we were sending it locally into gsm340_rx_sms_submit() anyway.
In the case of the ESME mirroring the report back to us, this
would result in two copies of the status report in the SMS
database, which were also both then delivered to the MS.
This causes no visible error to the user but is a waste of radio
resources.
With this patch, we check if it is the sms_report that has had
receiver set in sms_route_mt_sms() and not the original SMS we
are reporting on, which of course already has receiver set.
Change-Id: I3529b89535800eaa1127721d613fa7bbcb8b23be
the function vlr_subscr_req_lu() has a parameter is_ps, which is set
to vsub->vlr->cfg.is_ps by the only caller in vlr_lu_fsm.c. Inside the
function one can see that vsub->vlr->cfg.is_ps is used directly to
decide between PS or CS LU, we could also use is_ps there. Presumably
the parameter is_ps had been abandonned in an early development stage
and was not removed, so lets drop the parameter.
Change-Id: Id239721773b90099d122b232dae1ba457be9d255
the control interface command subscriber-list-active-v1 contains a stray
debug printf, lets remove it.
Change-Id: I085cf7b4a45708ccb883f70f71f4fbcfda58d332
Keith Whyte
Max
Oliver Smith
Philipp Maier
Pau Espin